Used Magewell Pro Convert SDI 4K Plus to NDI Converter

Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above

OBS
XSplit
vMix
VidBlasterX
Wirecast
streamstar SW
mimoLive
Any other NewTek NDI-enabled encoding or streaming software

BNC: SD/HD/3G/6G SDI

BNC: SD/HD/3G/6G SDI

SD Card (functions to be developed)

Mini-DIN-8 jack

1/4-20 mounting hole

10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB 2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM

Support for up to 4096x2160 input resolution

Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals
Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards
Support for 2K (2048x1080) & 4K (4096x2160) mode
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for 10/12-bit color depth
Support for extraction of SMPTE 352 payload identifier
Support for up to 16 (mono) audio channels

Support for extraction of audio formation information & channel status data
Limited support of 3Gb-DS: only the first stream can be captured
Limited support for capture of the first link of dual link interfaces:
YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
YCbCr 4:4:4 10-bit: captured as 4:2:2
RGB 4:4:4: R/B sub-sampled

Support for 4:2:2 8-bit output
Support for up to 4096x2160 output resolution
Support for NDI 3.x

Support for capture resolutions up to 4096x2160
Video brightness, contrast, saturation, hue adjustment
Video de-interlacing: Top field only, Bottom field only
Video aspect ratio conversion: Auto or manual selection of output aspect ratio
Video color format conversion: Auto or manual selection of input color format & quantization range; Auto or manual selection of output color format, quantization range & saturation range

Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats; Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats; Support for Limited or Full quantization range; Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Video mirror flip

Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'
Support for setting the source name shown in the system using Web UI. By default, the source name is 'board-index + serial number'
Support for setting board-index, from 0 to F, through the on-board rotary switch

Support for manual update using Web UI

Status LEDs indicate the working state of the device:
Power supply: On/off
Tally: Preview/program
Input signal: Locked/unlocked
Loop through signal: Loop through connected and signal detected/undetected

5V max current: Approx. 1.5A
Max power consumption: Approx. 7W

Operating temperature: 0 to 45 deg. C (32 to 113 deg. F)
Storage temperature: -20 to 70 deg. C (-4 to 158 deg. F)
Relative Humidity: 5% to 90% non-condensing

117.5 x 66.7 x 23.4mm (4.63 x 2.63 x 0.92")