





Picture does not represent the actual item
See Options
Need help? Ask our experts.
Review Summary
LumenRadio CRMX (DMX/RDM) Receiver
Up to 1640' (499.88m)
2404 - 2480MHz
DMX-512(A) and RDM ANSI E1.20
5V DC
Male USB-A
RP-SMA Female
2dBi RP-SMA Antenna
XLR 5-Pin Female with 180 deg. rotation
"Unlink" Button for disconnecting from CRMX network
DMX Setup and Standard RDM commands
-20 to 50 deg. C (-4 to 122 deg. F)
III
IP20
CE
CB
ENEC
cNRTLus
FCC
PSE
LumenRadio CRMX (DMX/RDM) Transmitter & Wi-Fi
CRMX: Up to 1640' (499.88m)
Wi-Fi: Up to 246' (74.98m)
2402 - 2480MHz
DMX - 512(A), RDM ANSI E1.20, Art-Net, sACN
XLR 5-Pin Female
One Universe with 512 Channels
EtherCON RJ45 Female
Two RP-TNC Female
2x2 dBi RP-TNC Antenna
"Link" button for linking to CRMX devices
Webpage interface for adjusting settings
On-Board On/Off Switch
100 to 240V, 50/60Hz
12V DC
2.5 x 5.5 DC Barrel Connector
5 - 12V DC
CE
CB
ENEC
cNRTLus
PSE
-20 to 50 deg. C (-4 to 122 deg. F)
III
IP20
SkyLink Receiver: 4.0 x 1.1 x 4.4" (10.16 x 2.79 x 11.18cm)
SkyLink Base Station: 10.7 x 6.0 x 5.4" (27.18 x 15.24 x 13.72cm)
SkyLink Receiver: 0.8kg (1.76 lbs)
SkyLink Base Station: 1.1kg (2.43 lbs)
The perfect wireless solution for Arri SkyPanels is now available. Say goodbye to DMX cables with SkyLink. Arri and Innovative Dimmers have teamed up to create SkyLink: a two-part system that allows for wireless DMX and RDM communication to SkyPanels. The SkyLink Receiver and the SkyLink Base Station use LumenRadio for DMX/RDM communication and a Wi-Fi chip in the Base Station allows for direct control from a DMX control application on a tablet or computer. Setting up a control network has never been easier.
Wireless for all SkyPanels
The SkyLink Receiver plugs directly into the DMX port on the back of any SkyPanel and receives power from the USB port directly below the DMX. This compatibility allows for SkyLink to work with all SkyPanel models including the S30, S60 and S120, offering a wireless solution for the entire SkyPanel family. The new SkyPanel S360 already has Wireless DMX built in and works seamlessly with the SkyLink products.
Wi-Fi to Wireless DMX
The real wireless magic happens in the SkyLink Base Station. Armed with two wireless chips, the SkyLink Base Station can communicate LumenRadio's Wireless DMX and the international standard of Wi-Fi. Therefore, a tablet or computer can communicate, via Wi-Fi, to the SkyLink Base Station which can, in turn, communicate the reliable CRMX standard to the SkyLink Receiver on the SkyPanel. This communication chain supports new and simple ways of controlling one or many SkyPanels
DMX + RDM = Total Control
Arri LED products have always included an excellent implementation of RDM (Remote Device Management) in addition to the DMX protocols. RDM allows for two-way communication with the fixture and enables the ability to change all settings on the lamp head remotely. The SkyLink system is fully RDM capable and allows for complete control over all aspects of the SkyPanel.
Compact and Rugged Design
The SkyLink Receiver has a unique, compact and robust design that fits perfectly within the SkyPanel family. The SkyLink is one of the smallest Wireless DMX receivers on the market and is designed specifically with the SkyPanel in mind. The swivel DMX connector allows for the SkyLink Receiver to be rotated 180deg. in order to achieve the best signal strength regardless of the SkyPanel's orientation.
Outstanding Range
The reliable Wireless DMX in SkyLink allows for strong and consistent communication to the fixtures. With an outstanding range of 150m (500'), SkyLink performs well on stage with typical obstructions. In optimal conditions, for example direct line-of-sight, the SkyLink can receive a signal up to 500m (1640') away. This allows for dramatically increased freedom on set while still maintaining complete control over the SkyPanels.