
Picture does not represent the actual item
See what's in the box

Picture does not represent the actual item
See what's in the box
This item is no longer available.
Review Summary
Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
Mic to Line (without limiter acting) Frequency Response: 280 - 15k Hz +/- 3dB
Microphone output to line - Audio Level (-50dBm Electret input): -9dBm
Microphone output to line - Distortion: <0.1%
Microphone output to line - Signal to Noise: >65dB
Clear-Com Sound: Yes
Frequency Response - Line to Headphone: 150 - 20k Hz +/- 3dB
Headphone input from line - Audio Level (-9dBm Electret input): 7dBm
Headphone input from line - Distortion: <0.5%
Headphone input from line - Signal to Noise: >50dB
Earphone to Mic - Crosstalk: >80dB
Sidetone - Adjustment Range (-80db mic input): >45dB
Power: Green LED
Talk A: Green LED
Call A: Orange LED
Talk B: Green LED
Call B: Orange LED
Intercom Line: 2x 6-pin XLR-M-F Ch. 1 2-Wire
Intercom Channel Pin 1: Common; Pin 2: PL Power (+28VDC); Pin 3: PL Ch-B; Pin 4: PL Ch-A; Pin 5: Program Audio; Pin 6: Program Audio
Headset: 4-pin XLR-M
Headset Connector Pin 1: Mic - (Mic Common); Pin 2: Mic +; Pin 3: Spkr-; Pin 4: Spkr+ (&0.5VCCDC Supply between Pin 4 & Pin 1)
Program Audio Input: XLR-6, pins 5 & 6
25mA Quiescent
35mA Average talk
40mA Talk with signaling
DC Voltage Range: 12-30VDC
0 to 70 deg. C / 32 to 158 deg. F
0/70C
0 - 90% non condensing
3.4 x 4.5 x 1.7" / 8.64 x 11.43 x 4.32cm
0.68lbs / 0.31kg
The RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio. The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.