Used Core SWX V4 Hypercine V-Mount Base, Quad Charger/Discharger 14.4/14.4/28v 392wh

Core SWX has transformed its award winning Hypercore series of battery packs into a "block" battery form factor with our new Hypercine unit. The Hypercine supports the film and digital cinema markets by offering both 14.4v and 28v power outputs.

The Hypercine was developed based on requests for an air travel friendly, Li-Ion, block battery solution. Leveraging our high-draw Hypercore battery technology, we've been able to provide a device which allows the user to place four brick battery packs within the device housing, transforming it into one single unit, while also offering simultaneous, built-in charging. With four Hypercore 98 batteries installed, the unit provides 392wh. Keeping travel guidelines in mind, you may also use Hypercore Prime battery packs, increasing the maximum capacity to 760wh. Each battery pack is placed within a hopper style system, with locking panels, allowing you to transport the unit just as you would a block battery. With the battery packs installed, you can choose to use the dual 14.4v 4-pin XLR outputs, or simultaneously use the 14.4v outputs with the 28v 3-pin XLR output. When you're done using the battery pack, supply the Hypercine with 100-240VAC via it's AC in, and charge up the unit in as little as 3 hours. A large, multifunction backlit LCD is present on the front of the unit to provide cumulative data when in discharge modes, and isolated battery pack information when in charge mode.

A built-in 28v regulator insures that the proper power is provided, while incorporated low-voltage circuitry insures the battery packs within are well protected. The Hypercine is a travel friendly, light weight, modular system, powerful enough to provide extended runtime to cameras including ARRI, Sony F65, RED, Panavision, etc. The 28v output can also be used to power HMI, and heavy draw LED lights.

Hypercine will ONLY work with SMART battery packs and the four packs must be of equal capacity. Core SWX recommends using Hypercore.

Safety Circuitry
Low voltage cut-off insures the battery packs connected to the Hypercine will not be damaged.

Multifunction Display
Accurately displays battery system status down to the milliamp.

Power Switch
Protects the battery packs from discharge by shutting down and effectively disconnected them from the Hypercine's regulation circuitry and LCD

14.4v/28v Dual Output
A multivoltage output provides 20A at 14.4x 10A at 28v making it the ideal for most film cameras.

Elevated Case Design
Lightweight aluminum case with an elevated design provides superior protection from impact as well as water.

Modular Design
Makes it Air travel approved, and offers the ability to swap battery packs on the fly.

Built-in Simultaneous Charger
With battery packs installed, supply the Hypercine with 100-240VAC via it's AC in, and charge up the unit within 3 hours.