Used Dolgin Engineering TC40 4-Position Charger for Canon LP-E17 Batteries

Enhance your photography experience with the TC40 4-Position Charger, specifically designed for Canon LP-E17 batteries. This high-performance charger is electrically compatible with all 7.2V Li-Ion camera batteries that have a capacity of 2200 mAh or higher, making it a versatile addition to your camera gear.

The modular design of the TC40 Charger allows for flexibility, accommodating different battery models when fitted with the appropriate adapter plate. This model is particularly suited for charging Canon LP-E17 batteries, but it's also compatible with Non-OEM batteries, broadening its usability.

One of the standout features of this charger is its ability to power up four batteries simultaneously. However, to ensure optimal charging, the charger must be configured with the correct plate to match the battery style, and the battery must have a minimum capacity of 2200 mAh.

The TC40 Charger is also designed for convenience on the go. With the right power cord, it can be powered by a 12V automobile power source, ensuring your camera batteries are always ready, no matter where your photography takes you.

Charging time varies depending on the battery pack's rated capacity, its charge state before insertion, and its age. For instance, a fully discharged new 2200 mAh battery will reach over 90% charge in about 2.5 hours, while a 5600 mAh pack will take approximately 3.5 - 4 hours.

The charger is equipped with Dynamic Power Management (DPM) to minimize battery charge time. This smart feature dynamically adjusts battery charge current, allocating more current to the deeper discharged of the two batteries in the same bank, ensuring both batteries are ready to use at roughly the same time.

The TC40 Charger also features charge channels LEDs that indicate each battery's state of charge. Upon plugging the charger into an electrical source, the green and red LEDs will blink every 3 seconds to indicate power. As charging progresses, the red LED illuminates, and as the charge nears completion, the green LED blinks at 90% readiness level and remains steady upon full charge.

In summary, the TC40 4-Position Charger for Canon LP-E17 batteries is a versatile, efficient, and user-friendly solution for your camera battery charging needs.