Used Glow Adapter for Para/Quadra/HexaPop System Softboxes to Lumedyne, Streaklight, Evolv

2022-02-04T08:35:38

Secret weapon for Godox AD200/360 users. You can attach some of the glow softboxes with this, and it makes mounting a fairly large modifier super easy. I have some of the smaller, 13" octoboxes from Norman that weigh about 10 ounces and mount straight to the bare-bulb attachment. The small octoboxes give decently soft light, almost like a beauty dish--compact and "good enough". I wanted something a little more moonlight-y but similar ease--so I got a 20" parabolic--and the light is about as soft as a large umbrella but with more control. Large enough for fairly large groups, or very soft close-portraits. And, it bayonet mounts directly to my AD200! The only issue is the weight feels a little much for the mount, but so far, so good. You just need to mount the light on the front threads and really crank everything down. Setup takes just a moment, rather than a fussy soft box assembly. I am often shooting alone and this means I can have a full portrait or formals setup in just a minute or two.

ELLIOTT A.

2019-12-11T22:37:44

Great product!!!

ANGELO W.

2019-08-13T07:09:38

However, you could get the diffuser and take it apart and use it for much less and you get a diffuser.

RODNEY W.

2019-04-02T11:45:39

Easy to use and works great

Matthew T.

2019-03-26T09:11:28

The product came and it fits perfectly. However, I have to reuse the existing screw to hold the adapter in place. I hope I could have a few extra screws in case I lose it.

Kavin C.

2019-03-15T13:00:44

Great and inexpensive way to add more power to a strobe light.

TOM S.

2019-03-05T08:10:59

Works perfectly as advertised, really convenient piece of equipment for an even more convenient soft box. Glow is definitely the way to go!

Bradley D.

2018-11-20T07:46:42

Came included in the Hex a Pop kit

GREG U.

2018-07-24T12:12:28

Adds more output for sure.

John K.

2018-04-09T08:48:08

This adapter is ok but once attached to the diffuser and ad200, it's not very tight. I had it fall off a couple of times.

Kevin F.

2017-12-29T08:45:19

I bought this to use with my Streak Light 360 and the Westcott Rapid Box 28". The Westcott uses a speedlight mount. When mounting the Streak Light, it can have a significant hole out the back allowing light to spill. I put this on the Streak Light then adjust it as close as possible and it works perfect. Much better than using a S bracket and Bowens speedring which was my next option.

DANIEL H.

2017-08-18T18:19:05

I am taking off one star because I think it is overpriced for what it is. However it is very sturdy and no one else makes anything similar so I didn't have a choice. I am using it to connect my Godox AD200/ FlashPoint eVolv200 to a SMDV speed box. This part should be listed as an accessory for the eVolv200 and should be an option for adapters when shopping for soft boxes. I had to do way too much research to discover this.

Eric M.

2017-06-26T09:29:19

Perfect fit and feel no issues . IG statoncheddesingh

Staton C.

2017-02-22T10:48:46

I have the Glow 38" and 24" works great for the 24". To much pressure on the Streaklight head for 38". I use a Godox S mount with Bowens adapter if I use 38" with Streaklight this allows me to switch quickly from a Streaklight to a Rovelight(monolight) if more power is needed such as High Speed Sync in the middle of the day battling the sun.

Michael C.

2017-01-24T20:34:19

I used this to make an adapter to use the Streaklight in a Chimera soft box.

J N.

2016-07-06T09:49:13

The adapter works well with Glow flash braket. It requires removing three tiny screws in order to mount this adapter. I used it with Quantum 4T flash.

ALEX A.

2015-12-30T07:46:57

balance , strong , and fit the flash .

KHA H.