Used Korg MS-20 Mini Monophonic Analog Synthesizer, 2 Oscillators, 37 Mini-Keys

SKU: US1943392

This item is no longer available.

Recommended Items

Overview
Compare
Learn
Specs
Protection

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest in Pre-Owned Gear & Peace of Mind!

Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Extended Protection

Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.

Korg MS-20 Specifications

  • Keyboard

    37-note mini keyboard

  • Polyphony

    Monophonic

  • Multitimbral

    No

  • Synthesis Method

    Voltage controlled analog

  • Control Section 1

    Voltage Controlled Oscillator 1 (VCO 1)
    Scale: 32, 16, 8, 4' (6 octaves, +cent, -cent)
    Waveform: Triangle, Sawtooth, PW-Square, White Noise, (x 4 modes)
    Pulse Width Adjust: 1:1 to 1:Infinity
    Voltage Controlled Oscillator 2 (VCO 2)
    Scale: 16, 8, 4, 2' (6 octaves, +cent, -cent)
    Waveform: Sawtooth, Square, Pulse, Ring Modulator, (x 4 modes)
    Pitch: +/-1 Octave
    VCO Master Control
    Master Tune: +/- 100 cents

  • Control Section 2

    Portamento: Maximum 10 s
    Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Frequency Modulation Intensity by EG1/EXT: -5V to 0V
    VCO Mixer
    VCO 1 Level
    VCO 2 Level
    Voltage Controlled High Pass Filter (VCF HPF)
    Cutoff Frequency: 50 Hz to 15 kHz
    Peak: Flat to self OSC
    Cutoff Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Cutoff Frequency Modulation Intensity by EG2/EXT: -5V to +5V

  • Control Section 3

    Voltage Controlled Low Pass Filter (VCF LPF)
    Cutoff Frequency: 50 Hz to 15 kHz
    Peak: Flat to self OSC
    Cutoff Frequency Modulation Intensity by MG/T.EXT: -5V to +5V
    Cutoff Frequency Modulation Intensity by EG2/EXT: -5V to +5V
    Envelope Generator 1
    Delay Time: 10 s
    Attack Time: 10 s
    Release Time: 10 s
    Envelope Generator 2
    Hold Time: 20 s
    Attack Time: 10 s
    Decay Time: 10 s
    Sustain Time: 10 s
    Release Time: 10 s
    Modulation Generator (LFO)

  • Control Section 4

    Waveform: Positive Sawtooth - Triangle - Negative Sawtooth, Wide Pulse - Square - Narrow Pulse
    Frequency: 0.1 Hz to 20 Hz
    Manual Controller
    Control Wheel (center click)
    Momentary Switch --> Ground
    Power switch and Volume
    Volume
    Indicators
    Keyboard Trigger LED
    Modulation Generator Rate LED
    Power On LED

  • External Signal Processor 1

    Control Section
    Input Signal Level
    Low Cut Frequency: 50 Hz to 2.5 kHz
    High Cut Frequency: 100 Hz to 5 kHz
    CV Adjust
    Threshold Level
    Input and Output
    Signal In
    Amplifier Out
    Band Pass Filter Out
    CV Out: 0 to +8.4V
    ENV Out: 0 to +5V
    Trig Out: +5V --> Ground

  • External Signal Processor 2

    Indicators
    Peak Indicator LED
    Trigger Indicator LED
    Control Section
    Input Signal Level
    Low Cut Frequency: 50 Hz to 2.5 kHz vHigh Cut Frequency: 100 Hz to 5 kHz
    CV Adjust
    Threshold Level
    Input and Output
    Signal In
    Amplifier Out
    Band Pass Filter Out
    CV Out: 0 to +8.4V
    ENV Out: 0 to +5V
    Trig Out: +5V --> Ground
    Indicators
    Peak Indicator LED
    Trigger Indicator LED

  • Patch Panel 1

    Keyboard
    Keyboard Control Voltage Output (Exponential): 0 to +8V
    Keyboard Trigger Output: +5V --> Ground
    VCO-1 + VCO-2 Control Voltage Input (Linear Response): 0 - +8V
    VCO-2 Control Voltage Input (Linear Response): 0 - +8V
    VCO
    VCO-1 + VCO-2 External Frequency Control Input (Oct/V): -5V to +5V
    VCF
    External Signal Input: 3Vp-p maximum
    External High Pass Filter Cutoff Frequency Control Input (2 Oct/V): -5V to +5V

  • Patch Panel 2

    External Low Pass Filter Cutoff Frequency Control Input (2 Oct/V): -5V to +5V
    VCO + VCF
    Total External Modulation Input (T.EX): -5V to +5V
    VCA
    External Initial Gain Control Input: 0 to +5V
    EG
    EG 1 Envelope Signal Normal Output: -5V to 0V
    EG 1 Envelope Signal Reverse Output: +5V to 0V
    EG 1 + EG 2 Trigger Input: --> Ground
    EG 1 Trigger Input: --> Ground
    EG 2 Envelope Signal Reverse Output: +5V to 0V
    MG

  • Patch Panel 3

    Triangle Output: Positive Sawtooth - Triangle - Negative Sawtooth (5Vp-p)
    Rectangle Output: Wide Pulse - Square - Narrow Pulse (0 to +5V)
    Noise Generator
    Pink Noise Output: 5Vp-p
    White Noise Output: 5Vp-p
    Sample and Hold
    Clock Trigger Input: --> Ground

  • Patch Panel 4

    Sample Signal Input: 5Vp-p maximum
    S/H Output: 5Vp-p maximum
    Modulation VCA
    Control Voltage Input: 0 to +5V)
    Signal Input: -5V to +5V
    Signal Output: -5V to +5V
    Manual controller
    Control Wheel Output: -5V <-- 0V --> +5V
    Momentary Switch Output: --> Ground

  • Connectors

    1 x 1/8" (3.5 mm) TS mono mini Signal Output (2Vp-p, output impedance 3.5kohm)
    1 x 1/8" (3.5 mm) TS mono mini External Signal Input
    1 x 1/8" (3.5 mm) TRS stereo mini Headphone
    1 x 5-pin DIN MIDI In
    1 x USB Type B

  • Power Requirements

    9V DC via included external power supply
    9W consumption

  • Dimensions (WxDxH)

    19.4x10.1x8.2" / 49.27x25.65x25.65 cm

  • Weight

    10.6 lbs / 4.80 kg

Related Articles & Videos

Buying Guide for the Pro Audio Creative

Buying Guide for the Pro Audio Creative

Choosing the perfect gift for someone special is never easy. It is even more difficult when that special person is a musician. You’ve seen their studio and have no idea what all the knobs and lights do. You smile and nod as they roll around flicking ...

Read more

About Korg MS-20 Mini Monophonic Analog Synthesizer, 2 Oscillators, 37 Mini-Keys

Korg MS-20 Mini Monophonic Analog Synthesizer, 2 Oscillators, 37 Mini-Keys Features

  • Miniature MS-20 featuring a complete replica of the original analog circuitry at 86% of the original size
  • Overseen by the engineers of the original MS-20
  • Incorporates a dual VCO (Voltage Controlled Oscillator), dual VCA (Voltage Controlled Amplifier), dual VCF (Voltage Controlled Filter), dual EG (Envelope Generator) and a single LFO (Low Frequency Oscillator) structure
  • Self-oscillating high-pass/low-pass filters with distinctive distortion
  • External signal processor (ESP)
  • Extremely flexible patching system
  • MIDI In and USB connector
  • Replicates every detail of the original, down to the package binding and the included manual

What's in the box:

  • Korg MS-20 Mini Monophonic Analog Synthesizer
  • External Power Supply
  • 10 x Patch Cables
  • Manual
  • Original Box