Used Manfrotto 804RC2 3-Way Pan/Tilt Head with Quick Release - Supports 8.8 lbs

2013-12-16T19:00:00

VERY STURDY EASY TO OPERATE DOESN COME LOUSE WITH CAMERA AND 70-200MM LENS

ANTHONY S.

2013-02-04T19:00:00

The tripod I origionally purchased came with a ball type mount , this worked OK with non telephoto lenses, but as soon as I bought a heavier-quality zoom, getting it to stay fixed became a problem. This mount cured that right away. Additionally it mounted as if it came with the tripod. I can't recall what I paid, it wasn't a great deal and that adds to my satifaction.

EzSnap

2013-02-04T19:00:00

This is a great tripod head... it is everything i need/want. the only thing i would say "negative" about it is that is it a little heavy. Overall it gets the job done and i enjoy using it on location and can easily travel with it.

NESoP P.

2012-12-30T19:00:00

I enjoy product and architectural interior photography. I replaced my ball head with this head on on my 055xprob. This head provides a firm base, orients easily to the settings I look for, and locks down firmly with my T2i. This is a great addition to my photography equipment.

JAMES M.

2012-07-03T21:00:00

This head is absolutely incompatible with the Canon 5 D MARK III with Power Grip and the 70-200MM F/2.8L IS "II" USM or similar lens and Power Grip Combo as the tripod Mount on the lens does not allow the plate to lock down because the plates lock is jammed against the Grips surface and neither will move, so unless you want to take a Dremel tool to your new gear buy the 808rc4 wich i believe will remedy the problem.

ANDRE S.

2012-03-04T19:00:00

the customer service in ordering this product was fabulous what do it all over again just based on that

D B.

2012-02-26T19:00:00

Very happy with this purchase.

Happy L.

2012-02-12T19:00:00

Loved this tripod head

JEFF U.

2012-01-22T19:00:00

It moves smoothly and securely in all three axes and I'm glad I bought it. One problem I encountered was that I wanted to mount it on my Flashpoint 4-section carbon fiber tripod (very light and super solid), but the head tended to loosen on the panning axis, a problem I solved by purchasing a 56¢ neoprene washer at ACE hardware, which, when scrunched tightly, served as pretty good friction lock between the tripod and head. I feel that Adorama and/or Manfrotto should get together on a fix for that issue, as I feel they otherwise make a good combination.

PAUL D.

2011-11-28T19:00:00

Does everything a tripod head shoud do...not as fast as a ball head but I prefer a three way

CC

2011-10-23T21:00:00

Have not yet had the chance to use this yet but it looks like it will be a great head.

cwnlsl

2011-09-03T21:00:00

Great item easy to use very sturdy

Rob

2011-01-11T19:00:00

Perfect for my needs. Sturdy head - Does all the basics that I needs (great construction)

CharlesS

2010-06-06T21:00:00

I've had a pistol grip for years.....needed something a little bigger for a 1000mm..... Strong enough but not real big.......

Bob

2010-04-25T21:00:00

[...]bought two , one to replace the head from my old Bogen 3001 I have had for a great many years. The other for the Flashpoint 1228 I just bought. One of the tilt lever stick and is jumpy, I added WD 40 and that helped but when I get time will dismantle it and work it over to smooth it out. The quick release works fine but you need to make sure it is mounted before letting go of your camera.

CHARLES S.

2010-04-24T21:00:00

Good quality product for the price.

Patrick R.

2010-02-20T19:00:00

i think the design of the locking head could be easier to use.

Leslie

2009-06-01T21:00:00

I needed a high-quality head for my DSLR and heavy lens, but I wanted a cost-effective solution. This is an outstanding head! The controls are positive, smooth, precise, and they do their job solidly. Not only that, they just feel good to operate. The quality of this head far exceeded my expectations, especially at its very modest cost.

Dave

2009-04-08T21:00:00

Great product, It attaches securely to a Manfrotto 55Xpro with the Manfrotto system. For a tall person it is great with the 55XPRO (I don't have to stoop anymore) The gears work great and easily and is easy to adjust.. Love it

ALLAN E.

2009-03-29T21:00:00

The handles get in way when hicking.

Bruce

2009-03-29T21:00:00

This is a good 3-way head for tripods. It's easy to use, seems to clamp well enough, and is built solidly. It may have been nice to get a ball head for the sake of compactness, but the 3-way is nice to have if you don't mind transporting your tripod with this thing on the end of it. I'd be careful in disengaging the quick release, as it does release quick. If you don't have a hold of your camera, it will flop right off. No fault in the design, but something to be aware of and pay attention to.

CHRISTOPHER H.

2009-03-17T21:00:00

This is a fantastic robust head. I would not change it for a ball head because it allows me to set the three axis separately, which is great for panning and panoramic work. It holds my camera very secure and is safe for the lens. I also like that it has a scale grid. It does not have a spirit level however, but I anyway attach one to the hot shoe.

Tom

2009-03-05T19:00:00

I've used the 804 for about a month now and really like it. It has some significant improvements over the 3030 head, which I still use on a different tripod. This head is much lighter, the handles are more ergonomic, and the release plate cradle is a better design. The tilt scale faces the photographer and there's a bubble level. The clamp lock now has an automatic safety that releases easily with the thumb while moving the main lever with the forefinger. However, the user guide instructs you to apply additional pressure to move the lever to a position nearly touching the cradle. If you do this, the plate will be very secure but you'll need a mallet to release it. I've found that it's only necessary to apply a slight pressure to move the lever just beyond the snap lock position. This is completely adequate.

HUGH S.

2009-02-20T19:00:00

I use this and a Manfrotto ball head. This I tend to use more with heavier long lenses or where I want more stability.

Ron R.

2009-02-05T19:00:00

Good for D200 with upto a 300mm f4 but I wouldn't try anything larger.

nonamenm

2009-01-20T19:00:00

Just what I needed for our prom business. Great tripod for the money.

Joey Z.

2008-12-28T19:00:00

i got this one to replace one that was years old and unsteady. It is an excellent product and serves me well.

amataiclaudius

2008-09-23T21:00:00

Great for macro photography, night fotos...

Halfpressed

2008-07-24T21:00:00

Great head! It's a little bulky for traveling but has great control.

Sabo10

2008-07-24T21:00:00

Quality hardware; stable; supports D80, 70-200 2.8 and TC very well. A slight bit heavy.

Wolfman