Used SIRUI BCT3203 CF VD TRPD/100 BCH30 VHD

- BCT-3203 Broadcast-Tripod -
Combined with maximum stability are just two of the outstanding features of the SIRUI BCT-3203 . It was specially developed for large video cameras and camcorders and carries a weight of up to 18kg.

The double tube legs, the double spikes, the adjustable floor spider and the extremely comfortable center spider make this tripod indispensable for professional video recordings.

The tripod spiders are removable, can be individually adjusted in width and give the tripod the necessary stability. When working without a floor spider and on sensitive floors, the double spikes can be covered with rubber feet. Particularly practical are the large screw caps.

The tubes are made of 10-fold carbon fiber. This provides the following advantages over aluminum tubes: weight reduction, higher stability and lower vibrations.

Features
• Carbon 10x carbon fiber in 3 sections
• Fixed 100mm leveling half shell
• Double tube legs with large screw caps
• Freewheel leg angle without detents - fixed by tripod spinning
• Tripod spiders infinitely adjustable - Rubber floor spreader
• Double spikes or rubber feet for a firm grip in the ground

- BCH-30 Fluid Video Head -
With a maximum load capacity of up to 18kg, this fluid video head has been designed for video cameras and DSLRs. Thanks to the fluid system with separately adjustable pivoting and tilting frictions, it enables smooth, smooth and vibration-free camera operation. The Safety Lock System prevents accidental slipping of the removable plate. For precise alignment, there is a leveling staff at the top and bottom, the lower one is equipped with lighting (battery included). The Counterbalance can be adjusted in 13 steps from 3-18kg.

For safety, the safety lock system and that the mounting plate can only be removed to the rear. The mounting plate BP-150L has a rubberized support surface of 150x80mm, has 1x 1/4 inch and 1x 3/8 inch threaded screws for attaching cameras.

The BCH-30 is mounted with the 100mm leveling hemisphere on tripods with a 100mm half shell. With the 100mm hemisphere, the head can be aligned and fixed quickly.

Features
• 7 levels of friction adjustment for panning, plus 0 position without friction
• 7 Levels of friction adjustment for tilting, plus 0 position without friction
• Safety Lock System - Prevents slippage of the plate
• 1 Leveling level above, 1 leveling level below (illuminated)
• 2 rubberized swivel arms - extendable from 34-51cm
• 13 Levels counterbalance adjustable from 3-18kg
• Tripod Connection: 100mm hemisphere
• Change plate BP-150L sliding with scale at the head