Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems

Picture does not represent the actual item

See all Telex items

Used Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems

SKU: US1235606
Be the first to review this item

This item is no longer available.

Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Telex RTS BP-6000 Specifications

  • Input Line Connector

    1x XLR 6-pin female

  • Headset Connector

    1x XLR 4-pin male

  • Loop Output Connector

    1x XLR 6-pin male

  • Impedance

    Terminating, Balanced: 300 Ohms
    Terminating, Unbalanced: 200 Ohms

  • Bridging Impedance

    >10 kOhms unbalanced

  • Additional Requirements

    Dynamic Headset Impedance: 50 to 200 Ohms
    Electret Headset Impedance: 1 to 13 kOhms
    Headphones: 50 to 600 Ohms

  • Output Level

    0.0 dBu nominal

  • Maximum Output Power

    Headphone Amplifier: >140 mW into 150-Ohm load

  • Frequency Response

    200 Hz to 8 kHz ( +/-2 dB)

  • Audible Call Alert

    1 kHz

  • Sidetone

    >20 dB dynamic range

  • Crosstalk

    < -60 dB

  • Noise

    < -60 dB

  • Total Harmonic Distortion

    < 1.0%

  • Operating Frequencies

    Call Signaling, Balanced: 20 kHz
    Call Signaling, Unbalanced: DC only
    Mic Off, Balanced: 24 kHz

  • Maximum Operating Current

    50 mA unbalanced
    55 mA balanced

  • DC Current Requirements

    18 to 33 VDC

  • Controls and Indicators

    Controls: Call, talk, channel, and volume
    Indicators: Call, talk, and channel

  • Operating Temperature

    32 to 131 Degree F (0 to 55 Degree C)

  • Storage Temperature

    -4 to 158 Degree F (-20 to 70 Degree C)

  • Operating Humidity

    5 to 95%, non-condensing

  • Storage Humidity

    15 to 90%, non-condensing

  • Dimensions (W x D x H)

    3.7 x 1.3 x 4.7" (95.2 x 34.2 x 119.2mm) (without belt clip and top panel)
    3.7 x 1.6 x 4.8" (95.2 x 39.4 x 121.6mm) (with belt clip and top panel)

  • Weight

    13 oz (369g)

About Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems

The BP-6000 is a portable user stations compatible with Audiocom and Clear-Com party line systems. The BP-6000 is a 2-channel beltpack equipped with a mode-sensing system configuration, meaning the beltpack determines what type of system it is installed into and configures itself according to the system.

The BP-6000 has a 4-pin male XLR connector with auto-sensing headset inputs. Dynamic and electret headset microphones are supported. The loop and line connection both use 6-pin Switchcraft connectors.

Multiple programming options are available. To simplify programming, voice prompts guide the user through the menus.

Telex RTS BP-6000 Universal 2-Channel Beltpack for Audiocom and Clear-Com Systems Features

  • Voice prompts for simplified configuration
  • Remote Mic Kill turns off all active microphones, reducing background noise
  • Programmable TALK Button, (Always) On, (Always) Off, Switched, or Momentary
  • Mode-sensing System Configuration
  • Updated design for modern, sleek appearance
  • Reduced current draw allows for more beltpacks being powered by the power supply
  • Auto-sensing headset inputs, electret or dynamic
  • Uses a 6-pin Switchcraft connectors for line and loop connections

Used Guarantee

30-day money back!

Sell or Trade your Gear

Get started in 3 easy steps

What's in the box:

  • Original Box
  • Item Note: Item powers on but was not fully tested