Used Tilta Tiltaing Panasonic GH Series Camera Cage Kit C with Quick Release Top Handle, QR ARCA & Manfrotto Plate, Black

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4"-20 and 3/8"-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, ARCA and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

Compatible with Tilta Type I Side Handles.

- Quick Release Top Handle -
This quick release top handle easily and securely attaches to the top of the half and full Tiltaing camera cages. It provides several 1/4"-20 and 3/8"-16 mounting points as well as one cold shoe mounting point on the front and one on the back of the handle.

- Tiltaing ARCA Quick Release Plate -
This Arca-Swiss compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages to allow you to quickly and easily attach and detach from Arca-Swiss support systems.

- Tiltaing Manfrotto Quick Release Plate -
This Manfrotto-compatible quick release plate attaches directly to the bottom of the Tiltaing camera cages to allow you to quickly and easily attach and detach from Manfrotto support systems.

- HDMI Male to HDMI Female Cable -
This cable was designed for the Tiltaing Panasonic GH Series Cage. It plugs into the HDMI port of the camera and adapts it to a female HDMI port, allowing for a more ergonomic route for your HDMI cable connection and a tighter fit to the Tiltaing cage.

- Side Focus Handle Type I (F570 Battery) -
This side handle slides onto the base of the half and full Tiltaing camera cages. A battery port on the bottom of the handle allows you to use a Sony F570 battery to power the Nucleus Nano motor via the 8V Micro-USB power output. A 12V DC output is also integrated into the handle.

A built-in finger wheel allows you to control the Nucleus Nano motor through a wired connection and a run/stop button allows you to control the record start/stop function of your camera through an optional Nucleus-Nano R/S cable (for cameras that support this function).

- HDMI and Run Stop Cable Clamp Attachment for Panasonic GH Series
This clamp was made specifically for the Panasonic GH series of cameras in conjunction with the Tiltaing Panasonic GH Series camera cage. It attaches directly to the cage to allow you to tightly and securely fasten both a run/stop and HDMI cable to your camera setup.

- Tiltaing Hand Strap -
This hand strap attaches to the Tiltaing camera cages as well as some of the Tiltaing power/focus handles to provide you with a safe and secure way to hold your camera rig.

- 15mm LWS Baseplate Type II -
This 15mm LWS baseplate easily slides onto the base of the Tiltaing half and full camera cages for Sharp 8K, Panasonic GH, Fuji XT3, Nikon Z6/Z7, Sony a6, and Sony a7/a9. It provides 15mm LWS rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.

- 15mm Bottom Single Rod Holder -
This 15mm single rod holder can attach to the bottom of the half and full camera cage to allow you to place a 15mm rod off the bottom of the camera for attaching accessories.