Ubertronix Strike Finder Pro with RS80N3 Cable for Canon Cameras (Lightning, Laser, Time Lapse)

The Ubertronix Strike Finder Pro is the only trigger that comes with three extraordinary functions that allow you to photograph things that would otherwise be impossible with the human eye. It comes with a laser trigger sensor, an intervalometer and Camera trigger (Lightning or other high flash event). These sensors were selected based on feedback by other photographers looking for this capability. All you need is a DSLR camera and you're ready to go.

The Camera Trigger was designed to capture lightning strikes either day or night. It uses microcontroller-based technology along with an infrared sensor to capture the most stunning photographs with complete ease. The device mounts onto the camera hotshoe, so you can walk away and let it do all of the hard work.

The Laser Trigger was designed to capture anything that breaks the beam from water droplets to people walking through it. Once the laser has been tripped, the device instantly sends a signal to the camera telling it to release the shutter. The shutter releases about 45-60 ms later, depending on the camera.

The Intervalometer allows you to do time lapse photography. The device contains a small knob that that adjusts the duration of the time lapse from 1s to 10 min. Once set, the device sends a signal to the camera to release the shutter at the specified duration.

Compatible with the following cameras
• EOS 10D
• EOS 1D Mark II N
• EOS 1V
• EOS 20D
• EOS 10D
• EOS 20Da
• EOS 3
• EOS 30D
• EOS 40D
• EOS 50D
• EOS 5D
• EOS 5D Mark II
• EOS 5D Mark III
• EOS 6D Body
• EOS 7D Body
• EOS D30
• EOS D60
• EOS-1D
• EOS-1D MARK II
• EOS-1D Mark III
• EOS-1D Mark IV
• EOS-1D x
• EOS-1Ds
• EOS-1Ds Mark II
• EOS-1Ds Mark III