Viking Hot-Line Panel Phone with Keypad
SKU: VIKK19008
This item is no longer available.
Share:
Overview
Compare
Specs
Protection
About Viking Hot-Line Panel Phone with Keypad
The Viking K-1900-8 panel phone can be used to auto-dial a phone number each time the handset is lifted, as a multi-number auto-dialer, or as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset and an all metal cradle. The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.
Viking Hot-Line Panel Phone with Keypad Features
- Applications: Catalog sales
- Applications: Kiosks
- Applications: Courtesy and customer service phones
- Applications: Automated tellers (ATM's)
- Applications: Hot-line reservation phones
- Applications: Security and emergency phones
- Applications: Replaces leased ringdown circuits
- Applications: Gate/entrance communication in noisy locations (diesel trucks, factory noise, etc.)
- Auto dials 1 (up to 32 digits) programmable speed dial number
- Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
- Touch Tone or pulse dialing
- Touch Tone keypad
- Non-volatile memory (no batteries required)
- Operates on analog PABX and key system extensions or analog Centrex and C.O. lines
- Programmable 6 digit security code
- Touch Tone programmable
- Vandal resistant features: 1/8" thick stainless steel panel, armored cable, metal cradle and sealed metal keypad
- Programmable pre-dial pause
- Blocks fraudulent calls from hand held pocket dialers
- Limited toll restriction in dumb phone mode
- Hearing aid compatible amplified handset with sealed push button volume control