Williams Sound IR+ Complete System with IR M1 Control Center, 4x WIR RX22-4 IR Receiver

- IR+ Control Center -
The IR+ Control Center offers a versatile dual audio solution, allowing venues to opt between audio transmission via Wi-Fi or Infrared. Its design includes a scalable distributed infrared emitter array architecture, enabling the utilization of up to four emitters. These emitters can be stacked for extensive room arrays or strategically distributed throughout the space to cater to various room layouts, including wings, balconies, or other concealed areas within the venue.

The IR+ Control Center offers both Wi-Fi and Infrared audio transmission options, with Infrared being particularly suitable for assistive audio in spacious environments or for secure transmission within enclosed spaces. By connecting the IR M1 to a Wi-Fi multicast router or an in-house network, users can stream audio over Wi-Fi to the Williams AV WaveCAST app (available in the iOS app store or Google Play store).

Featuring a distributed infrared emitter array architecture, the IR+ Control Center accommodates up to four emitters, which can be either stacked for large room arrays or strategically distributed throughout the venue to accommodate various room layouts, including wings, balconies, or other obscured locations.

The rack-mounted or remotely located IR M1 Control Center includes support for up to four IR emitters as standard. Each emitter connects back to the modulator via a CAT5e cable, delivering both audio and power necessary to operate the remote emitter. With each emitter covering an area of 18,000 sq. ft., ample coverage is ensured throughout the designated space.


- IR+ Emitter -
The IR E4 Emitter transmits the audio input from the IR+ (IR M1). Covering a span of 18,000 sq. ft (1,670 sq. meters), a single emitter can be combined with additional IR E4 emitters to provide extra coverage. Up to four emitters can be stacked together for large room arrays or distributed throughout the room to accommodate wings in room design, balconies or other obscured venue locations.

For the IR E4 Emitter to function, it must be connected to the IR M1 modulator. Up to 4 emitters can be connected to the IR M1 directly, and up to 16 emitters can be connected with the use of IR A4 arrays.


- Four-Channel Infrared Receiver -
Featuring a sleek body-pack design, this four-channel selectable infrared receiver offers a convenient channel selector and user-friendly on/off volume control. It covers areas of up to 30,000 square feet (2,800 square meters) in single-channel mode and is compatible with Williams AV infrared transmitters operating within the 2.3/2.8/3.3/3.8 MHz bandwidth.

This infrared receiver, offering four-channel selection, is fully compatible with transmitters operating within the 2.3/2.8/3.3/3.8 MHz bandwidth. Enhanced by dual infrared detectors, it optimizes sensitivity and extends operational range. When utilized with a Williams AV Infrared Transmitter - IR M1 [D], IR T1, or IR T2, it covers up to 30,000 square feet (2,800 square meters) in single-channel mode. Its sleek, body-pack design features convenient channel selector and easy-to-use on/off volume control. The RX22-4N can be used with mono or stereo headphones, earphones or a neck loop (lanyard included).

Features
• Use with earphones, headphones or neck loop (lanyard included)
• Uses AA alkaline or rechargeable batteries
• The receiver shall be a body-pack type with IR detector lens behind face of the unit
• The unit shall have a lanyard for hands-free operation
• The receiver shall have a rotary-type volume control
• The receiver shall operate for 60 hours with two AA alkaline batteries and for 30 hours per charge with NiMH AA batteries
• The receiver shall be charged without battery removal via charger contacts in the case. A drop-in charger accessory shall recharge the batteries in 16 hours when used with CHG 3512 charger
• The receiver shall be housed in an impact resistant plastic case with a hinged battery door that does not separate from the receiver
• The receiver shall receive 2.3 MHz, 2.8 MHz, 3.3 MHz or 3.8 MHz modulated IR signals with 50 microS de-emphasis.
The receiver shall have a 3.5 mm stereo phone jack and accommodate low-impedance mono or stereo earphones and headphones
• The receiver shall accommodate neck loop telecoil couplers
• The receiver shall provide 125 dB SSPL90 output with HED 021 headphone and 110 dB SSPL90 with EAR 013 earbud-type earphone
• The system electrical frequency response shall be 25 Hz to 16 kHz, +1, -3 dB and the S/N ratio shall be 60 dB
• The receiver shall have CE, FCC RoHS and WEEE approval
• The receiver shall be the Williams AV model WIR RX22-4


- Body-pack charger, 2-bay -
Dual drop-in charger for body-pack style transmitters and receivers. Includes Power Supply.

For use with:
• PLR BP1 Loop receiver
• PPA R37 FM receiver
• PPA R38 FM receiver
• PPA T46 FM transmitter
• WIR RX22-4 Infrared receiver


- 18" Mono Neckloop -
This mono neck loop is designed to be worn around the neck, allowing an audio signal from a hearing loop to be transmitted directly to a user's hearing aid or cochlear implant equipped with a T-coil switch. It features a mono plug. For a stereo plug, see the NKL 001-S. 3.5 mm plug, mono, 8 - 16 Ohm. This neck loop is for users with moderate to severe hearing loss.

Safety Breakaway Feature
Integrated safety breakaway device. In the event the neck loop cord becomes entangled with an object in motion, the breakaway device will disconnect the neck loop from the user.

Features
• Integrated safety breakaway device
• 18" Cord
• Adult size
• 3.5mm plug
• monoaural
• 8-16 ohm
• Recommended for PockeTalkers, WF R1 receiver
• For individuals with moderate to severe hearing loss


- Folding Headphones (Mono) -
Folding headphone, adult size, 32 Ohm, mono. Mild and low gain hearing loss rating. Replacement earpads: HED 023, HED 023-100.


- Linking Bar -
Linking bar used to connect two IR T2 emitters or two IR E4 emitters. 2-1/2" bar with 1/4"-20 threaded male connectors on both ends.


- Wall/Ceiling IR Mounting Bracket -
Omnidirectional wall or ceiling mounting bracket. Use with IR E4 and IR T2.


- ADA Wall Plaque -
Let your customers know that an ADA-compliant hearing assistance system is available to them with a Hearing Assistance Available sign.

Elevate visitor awareness of your hearing assistance offerings through the ADA Wall Plaque. Designed for your convenience, the included adhesive and stand offer versatile mounting choices. You can effortlessly hang it on a wall or window using the provided adhesive or use the provided stand to display it on a service counter or desk, ensuring clear communication of your ADA-compliant hearing assistance options available.