
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
The system includes a WIR TX90 Transmitter, RX18 Receivers, and a CHG 518 5-bay Charger, all designed to work together seamlessly for a high-quality listening experience.
Yes, the coverage area can be expanded by connecting additional TX9 emitters to the system, making it suitable for larger spaces.
Absolutely, the system operates on a 2.3-3.8 MHz bandwidth, which is less susceptible to interference from both radio signals and lighting, ensuring a clear audio experience.
The system includes an omnidirectional mount for wall or ceiling installation, and there are also stand kits available for those who need a portable setup.
Infrared technology provides a secure and private listening experience as the signal is contained within the room and does not pass through walls, ensuring content remains confidential and interference-free.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Plastic
120V AC
100-240V / 12VDC TFP 043
5 Units
Individual Charging Indicators: Red LEDs
WEEE, RoHS
ABS plastic
BAT AP07D NiMH Battery Pack, 7 hours
Up to 3,063 sq ft (285 sq m) when used with the TX9 emitter or TX90 transmitter in single-channel mode
up to 1,000 sq ft (93 sq m) when used with the TX75 in single-channel mode
2.3 MHz or 2.8 MHz or stereo
200 Hz to 8 kHz, +/- 5 dB
60 dB at 10 m
Volume control thumbwheel
3-position selection switch (2.3 MHz, 2.8 MHz, stereo)
120 dB MAX SSPL90 with 2 cc coupler
Compatible with 2.3 MHz and 2.8 MHz IR transmitters, WIR TX900 and WIR TX925 systems
Built into receiver arms"
Uses EAR 240 silicon eartips
CE, RoHS
Wall Transformer, 24 VAC, 50-60Hz, 35 VA, 3-pin MOLEX Connector
TFP 010, UL/CSA
NEC Class 2 wiring, two-conductor, 18 ga., 200' (61m) max. length
FM Wideband, +50kHz deviation max., 50uS pre-emphasis
Channel A: Selectable, 2.3/2.8 MHz,
Channel B: Selectable, 3.3/3.8 MHz
3.5 watts
28,000 square feet (2600 square meter) in single channel mode when using the RX22-4 Receiver
18,000 sq. ft (1700 square meter) in two channel mode when using the RX22-4 Receiver
11,000 sq. ft (1000 square meter) in four channel mode when using the RX22-4 Receiver
3,500 sq. ft (325 square meter) in single channel mode when using the RX15-2 Receiver
3,063 sq. ft (285 square meter) in single channel mode when using the RX18 Receiver
>75 dB, +3dB
80 to 15,000 Hz, electrical response
Less than .2%, electrical response at 1kHz
Music preset 1:1, Voice preset 1.5:1, Hearing Assist preset 2:1
20 minute timer shuts off carrier when no audio is present
Red LED
CHA and CHB Input Level, press to select, 28 dB adjustable range
CHA and CHB Audio Level, yellow LED, flash
2 green LED carrier "on" indicators
3.5mm TRS headphone jack. CH A tip, CH B ring on jack, 32 Ohms headphone (min)
Music, Voice, Hearing Assist. Frequency response; Music: Flat; Voice: Mid-range boost; Hearing Assist: High frequency boost
Press to select, 21 dB adjustable range (1 kHz between low boost/hi-cut and low cut/hi boost).
3-Pin Molex, 24 VAC, 50-60 Hz, 35 VA
CH A and CH B, 3 wire Phoenix
Balanced or unbalanced, 316 mVRMS (-10dBV) nominal, 5.7k input impedance; max input (over volume range) -21 to +7 dBV.
BNC, 50 O, for use with TX9 only
RG 58 Coax, BNC connectors, maximum 1000' (300m) length
0-50 deg. C (+32 to 122 deg. F) ambient temperature, non-condensing, non-corrosive atmosphere
Wall or Ceiling Mount: BKT 024 Omnidirectional mount;
CE, FCC, RoHS, WEEE
WIR RX22-4 Four-Channel Receiver
WIR RX15-2 Two-Channel Receiver
WIR RX18 Two-Channel Receiver
CHG 518 (L x W x H): 12 x 6.25 x 1.5" / 304.8 x 158.75 x 38.1mm
WIR TX90 (W x H x D): 11.25 x 6.25 x 2.125" / 285.75 x 158.75 x 53.98mm
CHG 518: 1.04lbs / 0.47kg (excluding power supply)
WIR RX18: 2oz / 56.69g
WIR TX90 (W x H x D): 1.8lbs / 0.816kg
The Williams Sound 2-Channel Infrared Listening System in sleek black is a comprehensive audio solution that includes a WIR TX90 Transmitter, RX18 Receivers, and a CHG 518 5-bay Charger. This advanced system integrates modulator and emitter technology into one compact unit, optimizing operational efficiency and saving valuable space. The TX90 transmitter emits a broad-angle infrared signal, focusing the IR energy effectively within the listening area. Operating within the 2.3-3.8 MHz bandwidth, this high-tech system is designed to minimize interference from radio signals and lighting. With the capacity to cover up to 28,000 sq ft (2,600 sq m) in single-channel operation, the TX90 transmitter is ideal for large spaces. The system's coverage area can be effortlessly expanded by integrating additional TX9 emitters. Included in the package is a versatile wall/ceiling omnidirectional mount, with stand kits available for those requiring portability. This durable and portable 2-Channel Infrared Listening System from Williams Sound is the perfect choice for any listening center seeking a reliable, high-quality audio solution.