Xume Lens Adapter 77mm Bundle with (2x) Filter Holders & Breakthrough Photography 77mm Center-Pinch Lens Cap

SKU: XULA77A

This item is no longer available.

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Shopper : Why Did You Choose This?Patricia H : An affordable magnetic filter holder for existing filtersLeslie D : Second purchase! Convenient, strong magnet, makes filter swapping a breeze!Carol K : Hoping to save time switching filters - and avoid bobbling them as I typically do when screwing them on and off.Thomas B : Recommended by photography club friend.MIKE B : convenience of operation, especially with ND and ND Grad filters

Reviews about this item

Review Summary

2019-05-26T06:56:53

Rated 2 out of 5

Could be MUCH better

Thought this would be great for ND filters, but with the base attachment you cant put a lens cap on. So it does work great if you don't mind unscrewing it on and off between uses.

Steven P.

2019-05-22T13:19:34

Rated 2 out of 5

Xume/Breakthrough Photo bundle

Really like the Xume magnetic system. Not sure why the Breakthrough lens cap was included however as they don't fit.

Jon R.

2018-11-06T13:21:59

Rated 4 out of 5

A great time-saver

This is an excellent product that facilitate the changing of filters. The only issue that it does not support standard lens cap so you must buy the push on caps from Manfrotto.

YIZHOU X.

2018-09-12T10:48:29

Rated 5 out of 5

XUME is great!

The ease of being able to change filters (circular polarizers, Neutral Density filters, etc) so fast without the hassle of screwing/unscrewing the filters makes this a no-brainer for me. The magnetic system is really strong - never had a filter drop off, brushed off accidentally, etc. It just works.

BRUCE W.

2018-09-11T06:25:00

Rated 3 out of 5

Don't expect rapid delivery

I paid extra for 3 business day delivery. I am actually getting 4 business day delivery and I will be on my way to China when these adapter arrive. Don't bother paying extra for fast delivery. Order from Amazon Prime and get faster delivery for less costs.

LARRY J.

2018-06-27T11:35:50

Rated 2 out of 5

They work ok, but it's easy to lose your filter.

I lost two separate filters on two different occasions, as I was walking around with these attached.

TIM M.

2018-01-23T16:29:34

Rated 4 out of 5

Makes using filters a snap

I bought these specifically for my ND filters so I can focus and set up without the filter, and then quickly snap the filter in place without risking changing focus or zoom. Couldn't be happier with the results. The only concern is with slight vignetting at wider angles. Not a big problem for me, just something to be aware of.

DON H.

2017-08-30T17:49:42

Rated 4 out of 5

I found the adapters very useful in removing the filter during the solar eclipse

I found the adapters very useful in removing the filter during the solar eclipse. I was also shooting long exposures on waterfalls in Oregon and it made for easy on and off of ND filter i liked it so much I purchased another base ring for another lens

RUSSELL T.

2017-08-30T14:15:32

Rated 5 out of 5

First Pondered, Then Purchased, Now Pleased!

I pondered for almost a year whether this Xume system would benefit my shooting style enough to justify investing in it. But, with a major trip just around the corner, I finally caved and jumped in--purchasing the 77mm kit plus an extra ring and lens cover. How glad I am that I now have the system installed on my lens. The Cokin filter frame feels quite secure and the screw-on filters are a snap to use. I had not fully utilized my Cokin frame for GND's in the past mainly because it was a hassle to remove before storing my camera in its case. Being able to pop the frame off makes using GND's much more appealing and utilitarian now. Also, since I have always used a lens cap in preference over a hood to keep my lens clean while shooting landscapes, using the 77mm filter adapter on my 67mm lenses is a non-issue--plus it insures I'll have no vignetting on my super wide angle lens. For lightweight filter frames and screw-on filters, I wouldn't hesitate to recommend the Xume system.

Diane M.

2017-08-18T09:49:26

Rated 4 out of 5

Frustration Relief

POS: Threading a filter on never seems to be an easy-on task and the risk of cross threading is no small concern when rushing to get-the-shot. So the Xume is one of those "why didn;t I find out about this sooner?" things. + 4 stars CON: It is possible to knock a filter off when using a lens hood. - 1 star.

Gerald R.

2017-07-16T13:43:44

Rated 4 out of 5

Convenient, mostly

I like these adapters. They are great for ND and IR filters, when you need to set focus and composition before adding the filter. They make it convenient to do so, with minimal disruption to focus. The one problem I have with them is that I cannot use my lens cap with the lens side of the adapter. this means that to use the lens cap, I have to either have the filter on, or remove the filter adapter. That's fine if my intent is to use the filter for the entire shoot, but if I'm not, it gets inconvenient.

JOSEPH R.

2016-07-30T09:49:13

Rated 5 out of 5

A few years ago I started using the Xume adapter and filter holders. Now they are on all of my lenses and DSLR camera bodies

A few years ago I started using the Xume adapter and filter holders. Now they are on all of my lenses and DSLR camera bodies. They make every change of filters as painless as it can possibly be. I can not think of ANY negatives except b before I committed to their use, I periodically checked to make sure that the adapters and holders were tight. Once you have made the commitment to using the Xume system a drop of non permanent Loctite Threadlocker Blue 242 will take even that fear away.

JIM T.

2016-02-01T12:06:18

Rated 1 out of 5

vignetting

These cause serious vignetting when using wide angle lenses on a full frame camera. For me, this is a deal breaker.

WILLIAM J.

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Failure Protection

Failure Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500

Xume 77mm Lens Adapter with (2x) Filter Holders & Breakthrough 77mm Lens Cap Specifications

  • Size

    77mm / 3.03"

  • UPC Code

    840014101825

About Xume 77mm Lens Adapter with (2x) Filter Holders & Breakthrough 77mm Lens Cap

FEATURED REVIEWS

A few years ago I started using the Xume adapter and filter holders. Now they are on all of my lenses and DSLR camera bodies

By JIM T.

A few years ago I started using the Xume adapter and filter holders. Now they are on all of my lenses and DSLR camera bodies. They make every change of filters as painless as it can possibly be. I can not think of ANY negatives except b before I committed to their use, I periodically checked to make sure that the adapters and holders were tight. Once you have made the commitment to using the Xume system a drop of non permanent Loctite Threadlocker Blue 242 will take even that fear away.

XUME is great!

By BRUCE W.

The ease of being able to change filters (circular polarizers, Neutral Density filters, etc) so fast without the hassle of screwing/unscrewing the filters makes this a no-brainer for me. The magnetic system is really strong - never had a filter drop off, brushed off accidentally, etc. It just works.

77mm (3.03") Lens Adapter
The Xume 77mm (3.03") Lens Adapter is a precision-machined metal ring that attaches to a lens with a 77mm-diameter filter thread to provide instant and secure attachment of filters when Xume Filter Holders are installed. This adapter ring incorporates NdFeB rare Earth magnets into its design to enable a strong, but easy to remove, connection between the lens adapter and filter holder. By using quick-to-remove magnets to attach filters, changing of filters can occur much more quickly and eliminates the chance of cross-threading or jamming when installing or removing filters.

The ring is approximately the same thickness as most step-rings and will not cause vignetting on most lenses with focal lengths as wide as 24mm (35mm equivalent). Over-the-lens type lens hoods are still compatible when Xume Adapters and Holders are in place and are recommended during use to provide an even more assured connection if working in busy environments. Additionally, traditional snap-on lens caps are not compatible with lens adapters; however a filter holder can be used on a lens cap to enable its use.

77mm (3.03") Filter Holder
The Xume 77mm (3.03") Filter Holder is a precision-machined metal ring that attaches to a 77mm circular screw-in filter to provide instant and secure attachment to lenses when a Xume Lens Adapter is installed. NdFeB rare Earth magnets are integrated within lens adapters to attach to the filter holder to and provide a strong, but easy to remove, connection that is suitable for use with oft-used filters. By using quick-to-remove magnets to attach filters, changing of filters can occur much more quickly and eliminates the chance of cross-threading or jamming when installing or removing filters.

The ring is approximately the same thickness as most step-rings and will not cause vignetting on most lenses with focal lengths as wide as 24mm (35mm equivalent). Over-the-lens type lens hoods are still compatible when Xume Adapters and Holders are in place and are recommended during use to provide an even more assured connection if working in busy environments.

Xume 77mm Lens Adapter with (2x) Filter Holders & Breakthrough 77mm Lens Cap Features

  • Enables Quick Secure Filter Attachment
  • Metal Ring with Integrated Magnets
  • Eliminates Filter Jamming

Key Features

  • 77mm 3.03" Lens
  • 77mm 3.03" Filter

What's in the box:

  • Xume Lens Adapter 77mm
  • Xume 1 Year Warranty
  • 2x Xume 77mm Filter Holders
  • Breakthrough Photography 77mm Center-Pinch Lens Cap