


See Options
Need help? Ask our experts.
The bi-amplified design of the DBR10 means it has two separate amplifiers - one for the high-frequency drivers and one for the low-frequency drivers. This allows for more precise control of the sound and ensures that the speaker can handle high volume levels without distortion.
The DBR10 is designed with a lightweight and durable plastic cabinet with ergonomic handles. This makes it easy to transport and set up at different locations, making it a great choice for live performances and events.
The DBR10 features an onboard 2-channel mixer with two input channels. Channel 1 has a combo jack that accepts both XLR and TRS Phone for either Mic or Line level input signals. Channel 2 offers two input options; a combo jack that accepts XLR or TRS Phone and an RCA pin jack for input from CD players or other stereo line-level sources.
Yes, the DBR10 is a versatile loudspeaker that's suitable for a wide range of applications, including outdoor events. It delivers high-quality sound, has a durable construction, and is easy to set up and transport, making it an excellent choice for outdoor performances.
The DBR10 has a frequency range of 55Hz to 20kHz. This wide frequency range allows it to reproduce both low and high frequencies accurately, resulting in a balanced and high-quality sound.
Review Summary
2024-10-14T20:00:00
The clarity and volume of this product far exceeded my expectations. I have put vocals, a keyboard and a horn through it for a jazz lounge gig and found it to be extremely clean sounding with no distortion. I push baselines with my keyboard and was concerned that the bass would be lacking but it wasn't..Sounds great at a moderate volume. Thanks Yamaha
Enil55

2023-09-19T09:34:15
I'm a keyboard player and use this as a personal monitor and small gig amp. I bought it to replace my 20-yr old Yamaha MS150 (which is TWICE the weight). This DBR10 sounds amazing. Plenty of bass even though only 10". At first I was a little concerned about the lack of EQ knobs, but the EQ preset switch on the back does great.
STEWART C.
2023-03-05T19:00:00
Use primarily to DJ outdoor parties in Florida (pool parties, car shows, block parties, etc.
Fogg D.

2017-02-27T19:00:00
I recently 'fell in love' with Yamaha speakers- purchased 2-DXR 10's & 3-DXR 8's... LOVE them. I'm using the 8's (over EV 12" subs)- using DXR 10's & the remaining 8 for wedges & side fill. There are some occasions where I need a few more wedges but didn't want to spend lots... here come DBR 10's! While the spl's are a bit less (than the DXR's)- they are still higher than others in a similar price range. VERY crisp & clear- really cut through the mix!!
staurosjohn

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
2-way, Bi-amp powered speaker, Bass-reflex type
55Hz - 20kHz
H90 deg. x V60 deg. constant directivity horn
FIR-X tuning (Linear phase FIR filter)
2.1kHz
129dB SPL
Diameter: 10" cone
Voice Coil: 2"
Magnet: Ferrite
Diaphragm: 1"
Type: 1" throat compression driver
Magnet: Ferrite
Plastic
Black
50 deg.
Top
35mm (Bottom)
2x Bottom (Fit for M8 x 15mm eyebolts)
Class-D
Dynamic:700 W (LF: 500W, HF: 200W)
Continuous:325 W (LF: 260W, HF: 65W)
Fan cooling, 4 speeds
OFF, 100, 120Hz 24dB/oct HPF
D-Contour: FOH/Main, Monitor, OFF
Speaker: Clip limiting, Integral Power Protection, DC-fault
Amplifier: Thermal, Output over current
Power Supply: Thermal, Output over voltage, Output over current
Input1: Combo
Input2: Combo + RCA-pin x2 (Unbalanced)
Output: XLR3-32 (CH1 Parallel Through or CH1+CH2 Mix)
Input1 (XLR, TRS Phone): 3 kOhms
Input2 (XLR, TRS Phone, RCA Pin): 10 kOhms
Input1: LINE: 0 dBu, MIC: -32 dBu
Input2: 0 dBu
Input1: LINE: +10 dBu, MIC: -22 dBu
Input2: +10 dBu
Input1: LINE: +24 dBu, MIC: -8 dBu
Input2: +24 dBu
2x Level, Line/Mic, HPF, D-Contour, Thru/Mix, Power
18W
60W
100V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
12.1 x 19.4 x 11.4" / 30.73 x 49.28 x 28.96cm (with rubber feet)
23.2lbs / 10.52kg
086792992440
Nice, lightweight drivers for FOH or wedges!
By staurosjohn
I recently 'fell in love' with Yamaha speakers- purchased 2-DXR 10's & 3-DXR 8's... LOVE them. I'm using the 8's (over EV 12" subs)- using DXR 10's & the remaining 8 for wedges & side fill. There are some occasions where I need a few more wedges but didn't want to spend lots... here come DBR 10's! While the spl's are a bit less (than the DXR's)- they are still higher than others in a similar price range. VERY crisp & clear- really cut through the mix!!
Great sounding powered speaker
By Enil55
The clarity and volume of this product far exceeded my expectations. I have put vocals, a keyboard and a horn through it for a jazz lounge gig and found it to be extremely clean sounding with no distortion. I push baselines with my keyboard and was concerned that the bass would be lacking but it wasn't..Sounds great at a moderate volume. Thanks Yamaha
Take your audio experience to new heights with the DBR10 10" 2-Way Bass-Reflex Bi-Amplified Powered Loudspeaker from Yamaha. This high-performance speaker is engineered to deliver powerful, high-resolution sound, making it an ideal choice for live performances, DJ sets, and outdoor events.
The DBR10 is the most portable powered loudspeaker in Yamaha's lineup, offering unmatched ease of transport and setup. It harnesses the same state-of-the-art Yamaha DSP, amplifier, and speaker technologies developed for the professional DSR and DXR Series, ensuring superior sound quality at any output level.
This versatile loudspeaker features a custom-designed transducer. The high-power output woofers deliver well-defined, powerful bass with minimal distortion, while the 1.4" precision compression driver produces accurate mid-range and high frequencies.
The DBR10 is housed in a newly designed, lightweight cabinet optimized for Front of House (FOH) sound, floor-monitoring, and even rigged applications. The durable plastic cabinet offers the highest level of portability, and the sleek steel grill enhances cabinet durability and protects the internal components.
For added convenience, the DBR10 features an easy-to-use onboard 2-channel mixer with two input channels. Channel 1 has a combo jack that accepts both XLR and TRS Phone, allowing for either Mic or Line level input signals. Channel 2 offers two input options; a combo jack that accepts XLR or TRS Phone and an RCA pin jack for input from CD players or other stereo line-level sources.
The DBR10 also comes equipped with M8 rigging threads for rigged applications, making it a versatile choice for any audio setup. Whether you're a professional musician, DJ, or audio enthusiast, the DBR10 10" 2-Way Bass-Reflex Bi-Amplified Powered Loudspeaker from Yamaha is designed to take your performance to the next level.
866-430-2652