Yongnuo YN568EX III Speedlite for Canon Cameras

Supports C's Optical Transportation wireless Master Flash
In the optical transportation wireless flash shooting, the YN568EX III can used as master unit to trigger the Canon speedlite, supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash.

Supports High-speed Sync
The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, the maximum shutter sync is up to 1/8000.

TTL Flash with High Guide Number
GN58 at ISO100, 105mm, support TTL, M, Multi flash.

Supports Firmware Upgrade
The YN568EX III is equipped with the USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite.

Support the Battery Remaining Power Real-time Display
The YN568EX III is equipped with the battery electric power display function, allows you to check the battery remaining capacity easily.

High Speed Recycling System
The recycling time for full output just takes 2 seconds; you can get high speed current-return experience even without using brand new batteries, which will only takes 3-4 seconds.

Sound Prompt System
When the sound prompt system is enabled, different sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process.

Equipped with the AF-assist Beam Emitter
The YN568EX III is equipped with the AF-assist beam emitter, allows you to focus easily in dark environment.

Supports Electric Zooming ( 24 - 105mm)
Supports automatic and manual zooming, the focal length can be varied between 24-105mm.

Multiple Trigger Mode Supported
YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera.

• Automatic Settings Saving, supports custom settings (Fn)
• Equipped with Large-size LCD display and standard 2.5mm PC interface