Yongnuo i-TTL Transceiver YN622N II for Nikon Cameras, 2-Pack

2018-10-25T14:53:25

This product works well with my Nikon 810. It was used in with a small studio set up . Works in ttl mode paired with sb 910.,sb 600.

adam k.

2018-05-16T12:37:12

They work, most of the time. It's only just enough to be slightly aggravated during shoots. I have since moved on to the R2 flashpoint system

KATHLEEN R.

2018-05-03T12:20:29

I've used these for over 2 years with D5000 and D7000 series cameras and Nikon Strobes. I have found them to be a big improvement over the Nikon IR system. They're a little finicky and have failed to wakeup/ wakeup the flash a few times, but are reliable otherwise.

MICHAEL L.

2018-03-21T03:59:51

I've used 4 603s for almost `10 years with great results and decided to try the 622. I bought a transceiver and 3 receivers. All 4 units required a shim in the battery compartment to hold the batteries tight. Terrible design. Other than that, nice product for the price.

JAMES S.

2017-11-27T09:20:08

After testing my i-TTL Yongnuo I have decided it's as good as connecting my flash directly to my camera. I don't know how they do it, but it just works great. I tested High Speed Sync at full speed with flash on camera and flash mounted to the Yongnuo. Both photos were the same.

BILL L.

2017-10-17T10:23:36

Works great with my yn622n TX controller and yn565ex and yn685 flashes.

CORNELIUS B.

2017-10-15T11:57:05

These units do a great job. I also purchased the YN622N TX Controller. I have used them extensively since I received them. They have done what I have asked them. They also will do far more than I have asked them. I have no complaints and I would recommend them to a friend.

Kevin G.

2017-09-01T09:00:09

I have this system with the transmitter and 3 of these. They work well and it's nice to shoot manual and change the setting on the transmitter. The system I find works very well. Be advised you need to know how to do a manual reset. There is a YouTube video and it's easy and when things don't seem right just do that. It's happened just a few times but not often. For the price and the performance they work exceptionally well. You can't trigger from a light meter is the only down side. You'll need to trigger and test from the camera. Some meters allow you to do this. Mine does.

Paul B.

2017-07-31T07:34:46

Work exactly as expected.

Johnny M.

2017-05-11T13:25:28

Love Adorama! They ship promptly and have great customer service!

Lorri D.

2017-01-27T08:36:27

This product is great and it very easy to use .

james f.

2016-10-20T03:29:24

Out of the box, set them up (I purchased 4) and started using them. One on my Nikon D3, one on a Yongnuo 586 Speedlight, the other two on SB800s. Worked like a charm. Two wishes: That they included a pc cable, and they'd pay someone to write their manual in decent English, the translation stinks quite badly, something overcome quite easily in this day and age. Great product!

WAYNE E.

2016-10-14T13:32:20

The triggers work well. I had an older set of an early Yongnuo trigger and they were very iffy. These worked out of the box and the instructions had been written by someone who spoke English (unlike the previous ones!). Less range than Pocket Wizard but not a concern for products and portraits. Buy them.

TERRY R.

2016-04-29T10:08:08

This flash trigger has never failed to fire for me. While I think the range is somewhat overstated, I must say that it serves me well up to 50 feet with no problems. Simply select the same channels, put one on the camera and attach the second to the light and begin shooting. The units serve both at receiver and transmitter without requiring me to set any additional controls. Combing these with the Yongnuo YN-622N-TX Wireless i-TTL Flash allows me to functionality. These two sets allow me to control output levels three speed lights independently. What more could I ask for at this price.

FRANK B.

2016-04-28T10:36:17

Use these triggers with a YN622N controller on my D3300 and YN565EX speedlight, plus an old Nikon SB 50DX speedlight. Although I haven't used them much yet, they appear to work as advertised, and am happy so far with my purchase. Did not give 5 stars because of limited use. Will update rating (or lower it) once I have spent more time with these units.

Jon S.

2016-01-05T13:58:30

Using these with an SB900- SB700- and two SB600 flash units. No issues so far. I picked up the 622TX as the controller and as other reviews indicate it is a much easier way to control the flash. They seem to be fairly sturdy but time will tell. I've wanted a TTL radio system that didn't break the bank and these fit the bill perfectly. Overall very pleased in my limited testing

MARK D.