Zacuto EVF Recoil Pro V2 Shoulder Rig for Panasonic EVA1 Camera

The EVA1 EVF Recoil Pro V2 is a shoulder rig designed specifically for the Panasonic EVA1. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you. The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig. This rig is also available with Dual Grips.

VCT Pro
This baseplate has a sliding top plate for quickly removing the camera from the rig or fast length changes, a built-in, curved shoulder pad, a v-wedge tripod connector (with 1/4" 20 and 3/8" 16 screw option). It has removable and extendable 6.5" iris rods and rows of 1/4" 20 screw holes along the sides for accessories. It has quick release 15mm rod parts in the rear. The recessed rod mount offers maximum accessory capable space under your camera lens.

EVA1 Trigger Grip
Relocates the Panasonic EVA1 camera grip to a comfortable handgrip position for shoulder rigs. Our trigger grips are the most adjustable grips available. They allow for single-handed 360 deg. rotation with the simple press of a trigger. Flip it down for a low, rock-solid handgrip. Raise it up for more of an Aaton style position. Or quickly flip them both all the way up to set your camera flat on the ground or for storing in a case. Or stagger them if that is more comfortable to you. The length of the handgrips can also adjust by loosening a red lever and pulling the grip out or pushing in.

Top Handle with 15mm Rod Lock
This slim Top Handle has multiple 1/4" 20 and 3/8" 16 screw holes for mounting various accessories. The 15mm Rod Lock gives a side facing rod port for mounting the Axis Mini or a Zamerican arm.

EVA1 Top plate
The EVA1 Top Plate has a built in Z-Rail perfect for adding the Zacuto Top Handle or Recoil Handle. Or if desired, you can reattach your Panasonic camera Handle to the plate. The top plate has a multitude of 1/4" 20 and 3/8" 16 screw holes for mounting various accessories. At the back of the plate is a 15mm rod port for a Zamerican arm or other 15mm accessory- perfect for relocating the Panasonic LCD on an articulating arm.

Note

This rig requires the addition of a monitor or Zacuto Gratical EVF.