Ashdown Klystron C210T-500 575W 2x10 Horn Combo Amplifier

SKU: ASLYC210T500

This item is no longer available.

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Reviews about this item

Review Summary

Ashdown C210T-500 Specifications

  • Power Output (RMS)

    575W

  • Speaker Configuration

    2 x10 + horn

  • Frequency Response

    -3dB at 17Hz and 30kHz

  • Speaker Outputs

    Minimum impedance 4Ohms

  • High Instrument Input

    Impedance 3.9mOhms, input range 150mV - 20V p-p

  • Low Instrument Input

    Impedance 10kOhms, input range 300mV - 40V p-p

  • Line Input

    Impedance 22kOhms, input level 0dBu nominal

  • Line Output

    Impedance 10kOhms, level 0dBu nominal

  • DI Output

    600Ohms balanced, level -20dBu nominal

  • Tuner Output

    Impedance 1kOhms, level 0dBu nominal

  • EQ

    Bass +/-15dB at 45Hz, Middle +/-15dB at 660Hz, Treble +/-15dB at 7kHz shelving, Slider 1 +/-15dB at 110Hz, Slider 2 +/-15dB at 340Hz, Slider 3 +/-15dB at 1.3kHz, Slider 4 +/-15dB at 2.6kHz, Shape (Push Flat) +8dB at 50Hz & 4kHz, -8dB at 400Hz, filter slope - 6dB/octave,

  • Effects Send

    Impedance 22kOhms, level 0dBu nominal

  • Effects Return

    Impedance 22kOhms, input level 0dBu nominal

  • Dimensions (H x W x D)

    25.39 x 24.02 x 13.39" / 645 x 610 x 340mm

  • Weight

    81.57lbs / 37kg

  • UPC Code

    0094922759030

About Ashdown C210T-500

The Ashdown Klystron C210T-500 575W 2x10 Horn Combo Amplifier features a single switchable input for passive and active instruments with a blend of solid state and dual triode tube preamp stages. 3 straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz. And 2 pairs of additional sliders give 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. A built-in dual band compressor acts separately on the high and low frequency components of the signal to provide precise control. The on-board sub-harmonic generator turns the Klystron bass amp into a tone powerhouse.

Ashdown includes a 4-way footswitch that makes the Klystron among the most versatile live performance bass amps in the business. You have control over the compressor, sub-harmonic generator, tube grind and EQ pre-shape. The Klystron combo amp uses custom developed Neodymium speakers which incorporate a number of advanced features including: a cast aluminum chassis with thin brackets to avoid sound wave reflections, a magnet circuit with heat sink rims to ensure rapid heat dissipation and decompression holes in the cone. The result is a range of ultra-lightweight bass drivers that just keep getting louder as the level is increased, delivering a powerful, consistent bass tone at all volume levels and with no power loss over long performances.

Ashdown C210T-500 Features

  • Blend of solid state and dual triode tube preamps stages
  • 3 straightforward rotary tone controls
  • 2 pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz
  • Built-in dual band compressor
  • Sub harmonic generator
  • Custom developed Neodymium speakers

Key Features

  • Blend of solid state and dual triode tube preamps stages
  • 3 straightforward rotary tone controls
  • Built-in dual band compressor
  • Sub harmonic generator
  • Custom developed Neodymium speakers