Broncolor Scoro 1600S Wi-Fi / RFS 2 Power Pack

Scoro S is the first choice for extraordinary pictures. Thanks to the manifold and one of a kind possibilities, this power pack is the ideal light source in professional photography. No fewer than three lamp base outlets are available and each of them can be adjusted asymmetrically. Due to revised hard and software, the new Scoro S Wi-Fi / RFS 2 can be conveniently controlled by app ("bronControl"). By means of a Wi-Fi connection, mobile devices (smartphones & tablets) as well as desktop computers are able to communicate with this high-end power pack.

• Up to 50 flashes per second
• Control range over 10 f-stops in 1/10 or 1/1 f-stop intervals
• LCD display in joules/percentage
• Automatic stabilization of the Color temperature (ECTC) over the whole control range
• 3 lamp outlets, the power output of each of the 3 lamp outlets can be adjusted independently
• Individual choice of the Color temperature shift
• Works with all voltages from 100 - 240V
• Equipped with RFS 2 system
• Integrated Wi-Fi module

Cut-off technology
Flash duration and light output are the two decisive factors in light control. A microprocessor in Scoro and Move power packs will calculate for you the shortest or longest flash duration for a given output. This enables rapid flash sequences with up to 50 flashes per second.

Constant color temperature - ECTC
Scoro S, Scoro E and Move are the only studio flash system which can maintain color temperature over the entire power range at all outputs, or, when you need to, change it in calibrated steps of +/- 200 K at constant power (only Scoro S). The second generation of our patented ECTC (Enhanced Color Temperature Control) technology, which adapts flash voltage and flash duration to each other, achieves a constant Color temperature over the entire variation range at all lamps. When multiple lamp heads are connected, constant color temperature is guaranteed on all channels up to an asymmetry of two f-stops.

Patented ECTC technology enables a constant average Color temperature over the entire output range. The Color temperature tolerance band is only +/- 50 Kelvin. It controls the amplitude of the blue light component according to the warmer red component, which originates at cut-off. With this unique technology Broncolor provides output control over 11 f-stops or ten f-stop steps, at constant Color temperature. There is no other technology which compares with this performance. With other technologies such a constant Color temperature can only be attained over a maximum of four f-stops. If multiple lamp heads are connected, the constant Color temperature is guaranteed on all channels with an asymmetry of up to two f-stops. Even for fast flash sequences, constant Color temperature and quantity of light are the primary quality criteria for Broncolor products.

Individual power distribution
The Scoro S has three lamp outlets, the Scoro E and Move power packs have two each. Each lamp outlet has an individual power controller with LED display, which is adjustable independently of the other outlets. The unit therefore behaves like three (or two) independent power packs. You have a choice of up to 11 f-stops to set the flash output you need. That is a control range from 3 to 3200 J.

Scoro S units have three lamp outlets, Scoro E and Move have two each. Each lamp outlet has an individual power controller with LED display and is adjustable independently of the other outlets. The unit therefore behaves like three (or two) independent power packs. The individual power distribution combined with the large control range, at its maximum from 3-3200 Joules, allows the photographer an almost free choice of f-stop. The required flash output can then be chosen from up to 11 f-stops or ten f-stop steps. A further power display provides information about the total energy supplied by the power pack. With the buttons beside the display it is possible to change the total energy of all channels simultaneously.

Speed Mode
In Speed Mode the charging time and flash duration are reduced by up to 50% and the maximum flash energy is reduced by 25%. In this way you can achieve up to ten exposures per second at full output or up to 50 at reduced power. This makes Scoro and Move power packs the ultimate flash unit wherever speed is of the essence. And with its fan cooling even long flash series are no problem. In Speed Mode, Move can be operated at optimum Color temperature and maximum output with a minimum charging time of 0,9 s (600 J). The Scoro even manages 0,4 s at 1600 J. The shortest charging time is an unbelievable 0,02 s.

How is that possible
With the Speed button the maximum energy is reduced by 25% and, so, the charging time shortened by up to 50%. In this way Move, just like its big brother, the Scoro, achieves the world's shortest charging time of 0,02 s. Using this technology stroboscope shootings can be illuminated with only a single flash unit. For example, in technical and scientific photography motion sequences can be made visible. By alternately triggering several power packs, the number of flashes per second can even be doubled.