Cokin Modular Hood (Lens Shade) - P Series
Cokin Modular Hood: Picture 1 thumbnail
Cokin Modular Hood: Picture 2 thumbnail
Cokin Modular Hood: Picture 3 thumbnail
See all Cokin items

Cokin Modular Hood (Lens Shade) - P Series

SKU: CKMHP MFR: P255
(3)2 questions, 5 answers
$12.99
Earn VIP Reward Points

Key Features

  • Enhance your photography with the Cokin P series modular lens hood!
  • Achieve professional-grade images, minimizing unwanted lens flare effectively.
  • Durable Cokin lens shade protects your lens from bumps and scratches.
  • Modular design allows for easy customization to fit various lens sizes.
  • Improve image quality and contrast, especially in bright outdoor conditions.
  • Simple to attach and remove, making it an essential filter accessory.
See More Product Details
Special Order?Estimated to Ship: 09/11/2025
Calculate Shipping

See Options

1
Add to ListGet Sale Alert

Need help? Ask our experts.

Overview
Compare
Q&A

Questions & Answers

Shopper : there is off the market third party filter holders and filters ...slightly bigger filters and don't fit the standard cokin holder. The original hood is a tad too small for the third party filter holder. is this the hood that fits those tad bigger filter holders ?DAVID M : Your answer has been submitted: "Honestly, I don't know. However, I can tell you right off the bat, trying to make things fit from two different companies requiers gaffers tape. It's like putting a Chevy engine into a Toyota. If you really need a hood on your third party filter system, make it. Black card stock, or the black side of matt board, cut it to fit, then use gaffers (black duct tape) tape to adhere it to the filter holder. The idea behind hoods is to not allow light from whatever direction it's causing glare. If you don't have the right pieces fitting properly, you might have light leaking in from gaps. I have this hood in question and it fits the "P" series filter holder snuggly without gaps. It hangs out more in my bag than on the lens. If there's too much light above or to the side causing glare, I use my hand to shade the lens/filter. All in all, I'd stick with one brand or the other. Cokin filters, holders, and rings are really good for its price. Dave M. Commercial Photographer Salinas CA"DAVID M : Honestly, I don't know. However, I can tell you right off the bat, trying to make things fit from two different companies requiers gaffers tape. It's like putting a Chevy engine into a Toyota. If you really need a hood on your third party filter system, make it. Black card stock, or the black side of matt board, cut it to fit, then use gaffers (black duct tape) tape to adhere it to the filter holder. The idea behind hoods is to not allow light from whatever direction it's causing glare. If you don't have the right pieces fitting properly, you might have light leaking in from gaps. I have this hood in question and it fits the "P" series filter holder snuggly without gaps. It hangs out more in my bag than on the lens. If there's too much light above or to the side causing glare, I use my hand to shade the lens/filter. All in all, I'd stick with one brand or the other. Cokin filters, holders, and rings are really good for its price. Dave M. Commercial Photographer Salinas CADAVID M : Personally I would stick with Cokin filters. Reason, Cokin designs its filters to fit snuggly into its holders. This keeps any ambient light from entering the lens via the holder, however, if the slightly bigger third party filters fit well enough to not allow any unwanted light through gaps, then use them if you want. If you still have any concerns, I'd just stick with cokin filters. They're really good filters and holders for the price. I use the Cokin filter system/s with only black and white film. With digital or color film I use polarizers and also apply certain filter effects in PS. Dave M. Commercial Photographer, Salinas CAHARVEY L : I am not sure what the person is looking for, but here is a response that may be of help. * My main experience is with the very large Cokin X system, which is now a curiosity. * I very much like the folding hood of Cokin sizes P and X. However ... * Unfortunately, there is no clear standard for the rectangular filters like Cokin. * Other possibilities are Lee and Formatt; they are of different sizes, but I don't recall the direction. I have no experience with either one. * Strong word of caution: The plastic (or "resin" i.e. not glass) filters are of very mixed quality. For long focal lengths, i.e. 200 mm and beyond, the Cokin filters are simply poor. With care one may find a sweet spot on the filter that is good (it is longer than the lens is wide). However, there are bad spots that can turn a 300 mm $3,000 view camera lens into a Holga! Things get worse like the square of the focal length. Caution! I have checked and marked the good spots of the Cokin X filters that I have, but I seldom use them. * I presume that the Formatt filters, which are glass, may be much better, being intended for professional video work (and much more expensive), but I have no experience with them. They are too small for the X Cokin system and too large for the P Cokin system. * This mismatch of sizes is infuriating. If you have invested in the Cokin system -- or any single system -- you are stuck. Bad bananas! Graf von Foto

Reviews about this item

Review Summary

2011-12-25T19:00:00

Rated 2 out of 5

Cikin Modular Hood

Product is quite fragile, slight over pressure will cause it to crack, would prefer if it were made of metal.

Maxie 3.

2011-03-05T19:00:00

Rated 5 out of 5

Must have addition to the "P" system

Avoid the dreaded glare! Must have add on for Cokin "P" system. Segmented approach (stack up 1, 2 or 3 as needed) adapts to all lenses from wide angle to telephotos.

WILLIAM C.

2009-09-28T21:00:00

Rated 4 out of 5

Practical device.

When using the Cokin system, this device not only will shield the lens from glare, but also afford some protection from finger smudges on the filter, etc. I would have given it 5 stars if the hood was a longer, or if 2 sections were included in the kit.

Jehan G.

Models
Cokin Modular Hood (Lens Shade) - P Series

Cokin Modular Hood (Lens Shade) - P Series

SKU: CKMHP

MFR: P255

$12.99

Special Order

Generally ships in 7-14 days, subject to availability

Sekonic 401624 Zoom Lens Hood for L-608 and L-558

Sekonic 401624 Zoom Lens Hood for L-608 and L-558

SKU: SKL608LH

MFR: 401-624

$41.00

$52.00

Save:$11.00 (21%)

Temporarily On Backorder

Although this item is temporarily on Backorder, you can order it now and it will ship as soon as it arrives. Your card will only be charged once item is shipped.

Accessory TypeLens HoodLens Hood
FitsCokin P-
Accessory Compatibility-Sekonic L-558, Sekonic L-608

About Cokin Modular Hood

FEATURED REVIEWS

Must have addition to the "P" system

By WILLIAM C.

Avoid the dreaded glare! Must have add on for Cokin "P" system. Segmented approach (stack up 1, 2 or 3 as needed) adapts to all lenses from wide angle to telephotos.

It's time to enhance your photography experience with the durable and high-quality Modular Hood (Lens Shade) - P Series. This stylish lens hood is designed to intensify contrasts and eliminate unwanted reflections, thereby improving the overall quality of your captured images. With its easy-to-use design, it effortlessly fits onto the filter-holder by simply pressing on the upper and lower parts of the lens hood.

What sets this lens shade apart is its versatility. You can attach multiple modular hoods to one another, allowing you to customize your setup based on the focal length of your lens. This feature makes it an ideal accessory for photographers who use a variety of lenses in their work.

Compatible with the renowned Cokin P series, this lens hood offers broad usability across a range of lenses. Manufactured by Cokin, a trusted name in the photography industry, you can rely on the quality and performance of this protective lens shade. Whether you're shooting photographs or videos, the Modular Hood (Lens Shade) - P Series is a valuable addition to your camera gear.

Cokin Modular Hood Features

  • Durable and high-quality lens hood, designed to enhance photography experience
  • Stylish and versatile, allowing attachment of multiple hoods based on lens focal length
  • Eliminates unwanted reflections and intensifies contrasts for improved image quality
  • Easy-to-use design, fits simply onto the filter-holder
  • Compatible with the renowned Cokin P series lenses
  • Manufactured by Cokin, a trusted name in the photography industry

Warranty Information

This product has a limited warranty of 12 months.

Join VIP PRO

2 Day Delivery on thousands of items!

Sell or Trade your Gear

Get started in 3 easy steps

Key Features

  • Enhance your photography with the Cokin P series modular lens hood!
  • Achieve professional-grade images, minimizing unwanted lens flare effectively.
  • Durable Cokin lens shade protects your lens from bumps and scratches.
  • Modular design allows for easy customization to fit various lens sizes.
  • Improve image quality and contrast, especially in bright outdoor conditions.
  • Simple to attach and remove, making it an essential filter accessory.