


See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
29x30 matrix
8 analog in/out
1 speaker out (amplified)
12 expansion bus in/out
4 assignable processing blocks in/out
4 assignable fader blocks in/out
1 telco in/out
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters:, All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10KOhms
Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Noise Cancellation: 6-15 dB attenuation
Phantom Power: 24 V, selectable
Push-on mini-terminal block, balanced, bridging
Impedance: > 5KOhms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Push-on mini-terminal block, balanced
Impedance: < 50Ohms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Binding post connection
10 Watts at 4Ohms Impedance
THD + Noise: <0.5%
RJ-11
POTS (plain old telephone service) or analog extension from a PBX
A-lead supervision provided
RJ-11
POTS (plain old telephone service) or analog extension from a PBX
A-lead supervision provided
Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled
Frequency Response: 250 Hz to 3.3 kHz +/-1 dB
THD+N: <0.3%, re-max level 250 Hz to 3.3 kHz
SNR: >62 dB re max level
Tail Time: 31 ms
Null: 55 dB nominal
Noise Cancellation: 6-15 dB attenuation
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable, 200' maximum cable length between any two Converge Pro devices
Autoswitching with Quality of Connection (QoC)
10/100 Ethernet Network Port
10/100 Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS-232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
Version 2.0 Compatible
Type: B-connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max, 40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-adjusting
100-240 VAC; 50/60 Hz
30W Typical
Ambient room temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48-2005: AES standard on interconnections - Grounding and EMC practices - Shields of connectors in audio equipment containing active circuitry (self certified)
U.S.A. & Canada:
CSA safety listed
EU Countries:
RoHS compliant
WEEE compliant
CONVERGE Pro Mixer
Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Frequency Response: 20 Hz to 22 kHz +/-1dB
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150Ohms
THD+N: <0.02%
Dynamic Range: 100 dB (non A-weighted)
Crosstalk <-91 dB re 20 dBu at 20 kHz channel to channel
Number of Open Microphones (NOM)
PA Adaptive Mode
First Mic Priority Mode
Last Mic Mode
Maximum # of Mics Mode
Ambient Level
Gate Threshold Adjust
Off Attenuation Adjust
Hold Time
Decay Rate
12 analog in/out
18 expansion bus in/out
8 assignable processing blocks in/out
4 assignable fader blocks in/out
Filters:
All pass
Low pass
High pass
Low shelving
High shelving
Parametric EQ
Notch
CD Horn
Crossovers:
Bessel
Butterworth
Linkwitz-Riley
Compressor Delay; adjustable up to 250 ms
Gain/Mute
Input Gain Adjust
Mic or Line Level
Phantom Power on/off
Echo Cancellation on/off
Noise Cancellation on/off
Filters, All Pass, Low Pass, High Pass, Notch, PEQ
Mute on/off
Chairman Override on/off
AGC on/off
Automatic Level Control on/off
Auto Gate/Manual gate
Adaptive Ambient on/off
Pre AEC channel
Push-on mini-terminal block, balanced, bridging
Impedance: < 10KOhms
Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
Maximum Level: -65 dBu to +20 dBu
Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Noise Cancellation: 6-15 dB attenuation
Phantom Power: 24 V, selectable
Push-on mini-terminal block, balanced, bridging
Impedance: < 10KOhms
Nominal Level: 0 dBu
Maximum Level: 20 dBu
Proprietary Network
RJ-45 (2), 1.9 Mbps
Category 5 twisted-pair cable 200' maximum cable length between any two Converge Pro products
Autoswitching with Quality of Connection (QoC)
10/100 Mbps Ethernet Network Port
10/100 Mbps Ethernet PC Port
RJ-45 Connectors
Serial Command Protocol Only (Console software not supported on RS-232 port)
DB-9 female
9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop, no parity
Hardware flow control on (default)/off
Version 2.0 compatible
Type B connector
DB-25 female A/B (2)
Inputs A/B: active low (pull to ground)
Outputs A/B: open collector, 40 VDC max,
40 mA each
+3.3 VDC pins (2) (300 mA over-current protected)
Converge Console
Auto-adjusting
100-240 VAC; 50/60 Hz
30 W Typical
Ambient unit temperature: 14 to 122 deg. F (-10 to 50 deg. C)
AES48 compliant (audio equip grounding)
U.S.A. & Canada:
CSA safety listed
EU Countries:
RoHS compliant
WEEE compliant
CONVERGE Pro 840T Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 8i Mixer: 17.25 x 10.25 x 1.75" (43.82 x 26.04 x 4.45cm)
CONVERGE Pro 840T Mixer: 7.5 lbs (3.40kg)
CONVERGE Pro 8i Mixer: 7.5 lbs (3.40kg)
Let the CONVERGE Pro 840T and CONVERGE Pro 8i transform your professional audio conferencing experience with the 12-Channel AEC Microphone Mixer Professional Bundle. This sophisticated system is the ultimate solution for crystal-clear collaboration, presentation, and distance communication. The CONVERGE Pro 840T is not just a digital matrix mixer; it's a comprehensive conferencing system with a built-in telephone interface and speaker amplifier, designed to deliver the most natural audio conferencing experience with ClearOne's industry-leading HDConference audio processing technology.
Experience unmatched sound quality with full-bandwidth Acoustical Echo Cancellation (AEC) that eliminates reverberations, and enjoy improved duplex performance for the most natural interaction. The advanced noise cancellation adapts to ambient room noise, ensuring your conferences are free from distractions. With a high-resolution microphone preamp stage, you can fine-tune audio levels from 0-56 dB in precise 7 dB increments, while the innovative D.A.R.E (Dynamic Automatic Resonance Elimination) technology controls feedback effortlessly.
The CONVERGE Pro 840T offers unparalleled flexibility, allowing you to scale your system by linking multiple units for extensive microphone coverage and up to 16 phone lines. With ten mic gating groups and no space required between rack-mounted units, this mixer is highly adaptable to any professional setting. The system boasts 32 presets for on-the-fly adjustments and an enhanced management system featuring SNMP and HTML remote management for IT professionals.
For larger venues, the CONVERGE Pro 8i is the perfect addition, expanding your conferencing capabilities with up to 8 additional microphones. Each input benefits from ClearOne's HDConference processing, ensuring true stereo echo cancellation and full-duplex conversation. The 8i's pre-AEC routing is ideal for sound reinforcement applications, and its management improvements include integrated Ethernet and USB connections, SNMP and HTML remote management agents, and a comprehensive event scheduler.
Both mixers support a full-range audio response from 20 Hz to 22 kHz, automatic gain and level controls for consistent audio clarity, and are fully compatible with other CONVERGE/CONVERGE Pro units for a seamless integration. The drag & drop configuration software and expanded serial command list provide a user-friendly interface for customizing your audio setup.
Whether you're outfitting a convention center, hotel, auditorium, stadium, conference room, house of worship, or theater, the CONVERGE Pro 840T and 8i bundle ensures professional-grade audio that makes every conversation sound as if it's happening face-to-face. Choose this advanced, high-quality, and durable professional bundle from ClearOne, a trusted name in professional audio, for an unparalleled conferencing experience.