edelkrone HeadONE SlideMaster Complete Bundle

- SliderPLUS v5 PRO Long Camera Slider -

SliderPLUS
The first slider in the world that combines portable size with long camera travel.

• Magically Portable
• Silky Smooth Manual Motion
• Revolutionary Motorized Add-ons
• For All Cameras (up to 11 kg)

What makes SliderPLUS magical?
With its award-winning unique design, you will travel with half the weight of a traditional slider and work in tight/crowded spaces much more efficiently.

2x Slide Range
The rails of SliderPLUS move with the camera, giving you twice the amount of range compared to regular sliders of its size.

2x Dolly Range
SliderPLUS gives longer dolly in/out range compared to regular sliders. Since the rails move together with the camera, they won't get in the shot.

For any workflow
PRO models have higher carrying capacity.

Leaving Your Slider Behind? NO MORE!

Fast to Set up - Easy to Relocate
No tools or assembly required. It takes only a few seconds to set up for quick filming and location changes. SliderPLUS has a locking mechanism to make it immobile so you don't need to disassemble the system to relocate.

All Models Fit in edelkrone Backpack
This amazing portability makes it very easy to carry your SliderPLUS. You will use it more often!

Down to the Smallest Detail

Built-in Foldable Legs
You may adjust each leg independently to adapt to the terrain or fold them up for easy storage.

Magnetic Belt Clips
You can replace the belts whenever you need without wasting time thanks to the magnetic snap-on belt clips.

Pop-up Screw
The mounting screw on top can retract to protect your bag from scratches and tears.

Game Changer Add-ons

Hand-pushing Perfected: Steady Module
With Steady Module, even beginners can get perfectly smooth manual slides at the first try, even at very low speeds!

No batteries. No chargers.
Completely mechanical solution. Uses fluid dynamics to dampen and smooth out the movement. Perfect for remote locations with no electricity.

- HeadPLUS v3 Pan and Tilt Head -

Point Tracking feature
The "Point Tracking" feature automates head motions, enabling you to get amazing tracking shots effortlessly. With such impressive shots, you will captivate your audience while increasing your production value.

Hand-Controllable, Just point & set!
Manual control is just one of many unique features of HeadPLUS. This gives an unprecedented speed and ease to your workflow and makes the entire process much more intuitive.

Unfold to fit in any backpack
HeadPLUS is the only professional head you won't feel lazy about carrying.

You requested, we delivered.
Based on your valued requests, we've improved everything about HeadPLUS with v3.

• Redesigned Camera bracket that can fold vertically for vertical videos
• 2x faster pan & tilt
• 2x longer battery life
• 2x Bluetooth connectivity range
• 10x more precise positioning
• Auto calibration when entering the point tracking mode
• Easy access to the camera battery port (means changing camera battery without interfering with the setup)
• Direct port for our new Focus/Zoom Module v3 (means 1 less battery to manage and easier workflow)

Connects Wirelessly with the Body
When HeadPLUS is combined with an edelkrone Body device (slider, jib or dolly) you can easily program 3, 4 or 5 axis camera motions. You can record never-before-seen, amazing tracking shots, transitional scenes, motion time-lapses and visual effects shots with any combination you choose.

Seamlessly and wirelessly control all edelkrone devices from both Apple and Android devices.

Automatic Point Tracking
With the edelkrone exclusive Point Tracking Feature, you can lock on to any point in 3D space while your camera is moving on edelkrone sliders, jibs or dollies.

With the separate buttons to control the body and head you can trigger any body motion without worrying about the head control. HeadPLUS will act automatically to keep the point fixed in the frame giving you amazing parallax results.

Even while you are manually moving the system, HeadPLUS remains locked
As long as you have paired your HeadPLUS with an edelkrone motorized Slider, Jib or Dolly, you can take advantage of the Point Tracking feature

Teach a Point Easily
By using your camera, aim on the same point from 2 separate angles and that's it. This is how easy to set a point. The App will guide you step by step. This can be done in a matter of seconds.

Head & Body Control Separated
Point Buttons make the HeadPLUS lock on a target point so once you trigger body motion by using any of the position buttons, HeadPLUS will adjust itself in realtime keeping the frame locked on the point.

No image processing
While your Slider/Jib/Dolly is in motion, point tracking mode uses realtime inverse kinematic calculations to adjust the pan, tilt and focus of HeadPLUS. This method is unique to edelkrone motion control systems, and since it uses no image processing, it is currently the best performing and most reliable parallax video solution in the market.

Switch between points while the body is in motion
Point Tracking Mode will greatly enhance the appeal of your storytelling and exceed expectations by delivering unparalleled, captivating visuals.

Normally, achieving such visuals would require advanced motion control programming knowledge, hired experts, and long hours.

With edelkrone, these results are effortless and achieved right on the first try. You can even use this flow for LIVE scenarios.

A fresh, effortless, and enjoyable workflow.

Works With Any Body
You can pair your HeadPLUS v3 with any version of HeadONE to rotate your products and combine it with any edelkrone body device (Jib, Slider or Dolly) to control your camera movements.

Simply set the start and end positions
Even while manually rotating the turntable, HeadPLUS stays locked on your subject, keeping perfect focus. Easily test different angles, adjust framing, and fine-tune your motion without losing track of your product. Once you've found the perfect movement, let the system take over for a flawless automated shot-fast, effortless, and precise.

Switch Between Multiple Points
Store multiple points and seamlessly transition between them while the system is in motion, creating smooth and dynamic camera movements with precision.

Captivating Results in No Time
Whether you're filming commercials, product showcases, or detailed reviews, Point Mode v2 delivers seamless motion, precise automation, and breathtaking shots-without the hassle.

Keypose Motion Programming
Keypose mode is the base controlling mode that works with all edelkrone devices and device groups. With this mode, you can save the current pose of the devices in to a single button. By saving several poses on separate keypose buttons you can create smooth transitions between them.

Save & recall any pose
After saving a keypose (tap & hold), tap the button again to recall the system back to that pose. By pressing one keypose after another, you can transition your camera from one pose to another smoothly.

Loop between poses
You can tap 2 Keyposes at the same time, and initiate a never ending loop between these 2 Keyposes. Perfect for long interview sessions, podcasts, educational videos, etc.

Create a pose sequence with ease
Once you have 3 or more Keyposes saved, you can use the sequencer mode to trigger these Keyposes in any order you like. You can set separate transition speeds between each pose, and you can even put this sequence in to a back and forth loop.

Vision Module
The Vision Module sees what your camera sees (HDMI Connection) and takes control of HeadPLUS to follow moving faces or objects in your video. Vision Module also wirelessly streams your video feed to any edelkrone App with almost no delay.

Face & Object Tracking
You can start Face Tracking whenever a face is in the frame. Once activated, HeadPLUS will automatically pan and tilt to keep the face centered in the upper third of the frame.

Tap anywhere on screen to reposition the face
During face tracking, you have the flexibility to reposition the face within the frame by tapping anywhere on the screen. The system will keep the face there.

Search for a new face
Additionally, you can use the left and right direction buttons to switch to a different face in that direction. Once pressed, Vision Module will search for the next face in that direction. If no faces are currently present within the frame, HeadPLUS will pan until a new face is located, at which point it will automatically initiate tracking for that face.

- Motor Module -
Transform your SliderPLUS into a professional motion control system.

Can be hand-controlled
You can manually adjust the positions of SliderPLUS (and HeadPLUS) while Motor Module is attached. Instead of relying on a remote control, you can program your camera motions with just your hands! This gives an unprecedented speed to your workflow, and makes the whole process much more intuitive.

- Vertical Module -
Spring-powered mechanism that assists in carrying your SliderPLUS PRO setup, allowing the Motor Module to move the SliderPLUS PRO effortlessly at any incline.

Note: Requires Motor Module to function properly