Feelworld 7" IPS 3G-SDI/HDMI Camera-Top Field Monitor, 1280x800

This high resolution 7" monitor FW-1D/S/O uses IPS technology to provide the best possible picture, with more accurate color rendering and a wider range of viewing angles. The resolution of the screen is 1280 x 800 pixels and it has a high brightness of 400cd/m and high contrast ratio of 800:1. It's features a large array of software functions to help with focus and exposure.

• 178deg/ 178deg Viewing Angle
• HDMI, 3G/HD/SD-SDI, YPbPr, Video and Audio (L/R) inputs
• 7" 1280x800 IPS LCD
• Brightness: 400 cd/m2
• Contrast Ratio: 800:1

The monitor accepts a variety of input sources, HDMI, SDI-HD / SDI-3G, component or composite, which can be selected by using the toggle buttons on the front of the unit. Monitoring of audio can be done using either the on-board speaker or via the front headphone jack. In bright light conditions, the included folding sun hood can be quickly clipped on to block out unwanted glare and reflections from the sun.

Wider Viewing angle
Enjoy Consistent Images from Any Perspective. FW-1D/S/O uses an IPS panel, which provides a wide 178 deg. /178 deg. viewing angle and brightness output of up to 400nit. This means you'll be able to see accurate, consistent and bright images from any point of view

Speaker and Stereo Headphone Output
In addition to broadcasting picture, the V-Screen is also equipped with an audio system so you can simultaneously monitor your audio input while watching your picture.

Multiple Inputs and Outputs
Multiple input formats to meet all HD, SD, analogue video signal input and display demand Professional functions set. The monitor comes with 3G HD-SDI, HDMI, Composite and Component Input and Output. FW-1D/S/O has both HDMI SDI in and out, allowing it to not only display live signals, but also send them out to other monitors simultaneously. It's the ability to display live picture on multiple displays at once while still maintaining the original video quality.

Screen Hood
New extended screen hood, acquire ideal visual effect under almost all environments.

Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's have two model: 1.Red highlight over parts of the image in focus 2.Red highlight over parts of the monochrome image in focus.

Brightness Histogram
The Brightness Histogram is a quantitative tool to check the picture brightness. The feature shows the distribution of brightness in an image as graph of brightness along the horizontal axis (Left:Dark, Right:Bright) and a stack of the number of pixels at each level of brightness along the vertical axis.

False Color
The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.

Exposure (zebras)
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern, it is considered overexposed and displays the moving warning lines onto the over exposed areas.

Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.

Camera Mode Function
It will be full screen under camera mode.

Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.

Center Marker Safe Marker
Safe Mark for View Finding and Composition.

Image Flip
The Horizontal, Vertical and Horizontal and Vertical of the image around flip.(80%, 85%, 90%, 93%, 96%,2.35:1).