See Options
1 Year
$39.99
2 Year
$69.99
3 Year
$79.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
2 times/sec
2.5in diameter red
One each XLR-3F and XLR-3M
Input Voltage: 20-30V DC
Input Current: (idle) <= 10mA
Input Current: (max) <= 90mA
Brightness Control Three-way switch for flash and tone level control Speaker
32 Degree F to 122 Degree F (0 Degree C to 50 Degree C)
2.5 x 4 x 5.0" (63 x 101 x 127mm)
14.5 oz (415g)
The FL-7 Call Signal Flasher connects to any Clea -Com or compatible intercom system, providing both a visual and an audible indication of a call signal on the intercom channel. The flasher emits a bright red strobe light twice a second in response to a call.
The FL-7 also provides a ringing tone similar to a telephone. The level of this tone is adjustable. A front panel mode switch allows the user to choose among three operations: flasher only, ring only or both flasher and ring. The FL-7 is especially useful in higher noise environments or in situations where the operator must leave the vicinity of the intercom station to do other tasks.
Operation
Using a standard mic cable, connect the FL-7 to the intercom line near the operator who requires signaling. The FL-7 is powered by the intercom line, drawing only 80 mA during operation. The FL-7 has both male and female 3-pin XLR connectors allowing it to be connected anywhere on the intercom line.
Mounting Options
The FL-7 has rubber feet for placement on a table or flat surface. There are two keyhole slots on the bottom for wall-mounting.