Used Microphone Accessories

Used Sennheiser CHG 2 US 2-bay Table Top Charger with U.S Power Supply for Evolution Wireless D1 Series Digital Bodypack System

• Sennheiser charger: Reliable power supply.
• Durable build ensures long-term performance.
• Compact size: Saves space on your desktop.
• Stable voltage output for optimal device use.
• Two-bay charger: Powers two devices at once.

Used Sony SMAD-P3 Multi-Interface Shoe Adapter for UWP-D Series Wireless Receivers

• Secure Sony receiver mounting via multi-interface.
• UWP-D series wireless receiver adapter: cable-free.
• Durable shoe mount ensures stable audio capture.
• Seamless Sony adapter: quick, easy setup process.
• Compact, lightweight design for on-the-go use.

Used Shure UA834WB VHF In-Line Antenna Amplifier for Remote Mounting, 470-902MHz Frequency Range

• Enhance signal with VHF In-Line Antenna Amplifier.
• Wide 470-902MHz range ensures optimal performance.
• Durable aluminum housing for lasting reliability.
• Switchable gain (+/-2dB, +6dB, +12dB) for clear audio.
• Easy remote mounting with included bracket kit.

Used Telex UAD-4 UHF Narrow Band Antenna Combiner/Splitter System for FMR-500, FMR-1000 and SAFE-1000 Receivers, 600-780MHz Frequency, BNC Input/Output

• UHF Antenna Combiner/Splitter: Enhances sound quality.
• BNC Connectors: Ensures durable, secure RF input/output.
• 600-780MHz Frequency: Broad compatibility for receivers.
• For FMR & SAFE Receivers: Optimizes device compatibility.
• Reduces Noise: Provides clear audio, greater than 2dB.

Used Schoeps CMR Microphone Amplifier with 2m (6.56') Cable, Unterminated, 15 Ohms Output Impedance, 4-10 V Operating Voltage, Matte Gray

• Schoeps CMR: Premium microphone amplifier.
• Low-noise microphone amp ensures sound clarity.
• Durable build for reliable audio capture.
• Compact mic amplifier: 38 x 20mm dimensions.
• Wide 4-10V operating voltage range.

Used Sennheiser BA 20 Recharging Battery Pack for AVX EKP

Used Ambient Recording QuickPole Series 5 13.2' 5-Section Carbon Fiber Wired Boom Pole with Straight Mono Cable and 3-Pin XLR Connecter

• Lightweight carbon fiber boom pole, only 26.81 ounces.
• Extends to 13.2' with 5 sections; collapses to 3.4'.
• Durable twist-lock system for quiet microphone operation.
• Integrated XLR cable for streamlined audio recording.
• Adjustable boom pole with removable top; 3/8"-16 thread.

Used H&A Broadcast Arm with Internal Springs and Integrated XLR Cable

• Durable steel & plastic desktop microphone stand.
• Integrated XLR cable ensures low noise recording.
• Adjustable mic stand extends up to 40 inches.
• Stable broadcast arm supports up to 5 lbs mics.
• Compatible with 5/8"-27 standard mic threads.

Used H&A Pop Filter with Gooseneck and Adjustable Knob (Clamp On)

• H&A Pop Filter: Superior noise reduction tech.
• Gooseneck design ensures easy, precise placement.
• Durable pop filter build for long-term reliability.
• Universal mic pop filter: Secure, clamp-on mount.
• Enhance audio quality with this microphone filter.

Used H&A Value Series XLR M to F Professional Microphone Cable - 25'

• 25' XLR microphone cable ensures optimal length.
• Delivers superior sound quality for clear audio.
• Durable XLR cable build for long-lasting use.
• Low noise microphone cable for pristine recording.
• XLR male to female cable ensures compatibility.

Used H&A Carbon Fiber Telescoping Boom Pole with Internal Coiled Cable & Side Exit XLR Base (9') - Neutrik Connector - Carrying Case Included

• Extendable 9-foot carbon fiber boom pole for professional ENG & EFP audio capture
• Integrated internal coiled XLR cable with Neutrik connectors for reliable sound transmission
• Lightweight yet durable construction with high strength-to-weight ratio for reduced fatigue
• Triple strain relief system to protect internal cable during telescopic adjustments
• Side-exit XLR base for efficient cable management and setup

Used Ambient Recording QuickPole Series 5 13.2' 5-Section Carbon Fiber Wired Boom Pole with Coiled Stereo Cable and 5-Pin XLR Connecter

• Lightweight carbon fiber boom pole; portable design.
• Extends to 13.2' for optimal microphone placement.
• Integrated coiled cable reduces handling noise.
• Durable 5-section pole with secure twist locks.
• 5-Pin XLR connector ensures stable audio signal.

Used SM Pro Audio Mini Mic Thing Ultra Portable Mic Isolation Panel

Used Rycote Windjammer for Rode Blimp Windshield & Suspension System

• Superior windscreen: ultimate noise reduction.
• Durable synthetic fur: built to last for years.
• Perfect fit: custom-designed for Rode Blimp system.
• Pro audio: enhances recording clarity, reduces noise.
• Quick installation: easy to attach and remove.

Used sE Electronics RF-X Reflexion Filter X (White)

Used Sennheiser MZH600 Hairy Windshield for MKE600

• Sennheiser MZH600: Superior wind noise reduction.
• MKE 600 hairy windscreen ensures clear audio.
• Durable windshield: High-quality material ensures longevity.
• 7 x 2.25" windscreen: Perfect fit for MKE 600 mic.
• Easy installation: Quickly attach to your Sennheiser mic.

Used Sennheiser SKM 100 G4-S Handheld Wireless Microphone Transmitter with Mute Switch, No Mic Capsule (A1: 470 to 516 MHz)

• Your choice of Sennheiser's renowned e 835, e 845, e865, e 935, e 945 capsules
• Easy and flexible wireless synchronization between transmitter and receiver via infrared
• Fast frequency allocation for up to 12 receivers via new linking functionality
• Up to 20 compatible channels
• Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range

Used Sennheiser BA 30 Rechargeable Battery Pack

Used K & M 20170-500-55 Microphone Stand, 35.4 to 63" Height

• Durable steel microphone stand for reliable support.
• Adjustable height: 35.43-62.99" for optimal positioning.
• Stable tripod base ensures secure microphone placement.
• Portable, foldable legs for easy transport & storage.
• Compatible: Standard 5/8" thread connector included.

Used Audio-Technica XLRF-XLRM Balanced cable,

• Premium XLR cable ensures superior sound quality.
• 6' balanced cable with Neutrik connectors for durability.
• Low noise microphone cable with dual copper shielding.
• Heavy-duty PVC jacket offers lasting cable protection.
• 24 AWG cable provides optimal signal transfer value.

Used Auray Stuffed Rabbit Professional Windshield For Microphone (16cm)

Used Saramonic SR-SMC11 Professional Universal Shock Mount for Shotgun Microphones 0.59-1.22

• Isolate unwanted noise with this microphone shockmount.
• Universal shock mount fits 0.59-1.22" shotgun mics.
• Robust build quality ensures long-term microphone support.
• Achieve optimal sound with 360° rotation & 150° tilt.
• Quick, easy installation onto 15mm mounting rods.

Used H&A Suspension Shockmount for Large Diaphragm Condenser Microphones

• Isolate your mic: Superior noise isolation design.
• Built tough: Durable metal frame, quality assured.
• Universal compatibility: Fits most mic stands easily.
• Quick setup: Easy installation, saves valuable time.
• Adjustable angle: Achieve optimal mic positioning.

Used H&A Value Series XLR M to F Professional Microphone Cable - 6'

• 6' XLR Microphone Cable: Ideal for pro audio setups.
• XLR Male to Female cable ensures quality sound.
• Durable polymer jacket for long-lasting microphone use.
• Low noise microphone cable for clear recordings.
• Balanced XLR cable delivers superior audio value.

Used DPA Microphones SM1500 Shock Mount for Omnidirectional and Directional Microphones

• Isolate microphone noise with pro shock mount.
• Durable build ensures long-lasting shock mount use.
• Universal compatibility with various mic models.
• Easy installation for quick microphone setup.
• Adjustable design for optimal mic positioning.