Used Lectrosonics ZS-LRLMb-B1 L Series Kit, Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, CCMINI Case, B1: 537.600-614.375 MHz

SKU: US2070217 MFR: ZS-LRLMB-B1
Earn VIP Reward Points

What`s in the box:

  • Lectrosonics LR Receiver
  • LMb Beltpack Transmitter
  • M152 Omnidirectional Lavalier Microphone
See more

Key Features

  • Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, & CCMINI Case
  • Operates within a versatile B1 frequency range of 537.600-614.375 MHz
See More Product Details

INCLUDES FREE WARRANTY

  • This used item comes with a free 90-day warranty. ?
Overview
Compare
Specs
Protection

Reviews about this item

Review Summary

Lectrosonics ZS-LRLMB Specifications

  • LR Receiver: Channel

    B1

  • LR Receiver: Operating Frequencies

    537.600 to 614.375 MHz

  • LR Receiver: Frequency Selection Steps

    Selectable 25 or 100kHz

  • LR Receiver: Receiver Type

    Dual conversion, superheterodyne

  • LR Receiver: IF Frequency

    243.950MHz and 250.000kHz

  • LR Receiver: Frequency Stability

    +/- 0.001%

  • LR Receiver: Front End Bandwidth

    20MHz at -3dB

  • LR Receiver: Sensitivity

    20dB SINAD: 1.0 uV (-107dBm), A weighted
    60dB Quieting: 2.2 uV (-100dBm), A weighted

  • LR Receiver: Squelch Quieting

    > 100dB typical

  • LR Receiver: Modulation Acceptance

    +/-100kHz max. varies with selected compatibility mode

  • LR Receiver: Image & Spurious Rejection

    85dB

  • LR Receiver: Third Order Intercept

    0dBm

  • LR Receiver: Diversity Method

    SmartDiversity phased antenna combining

  • LR Receiver: FM Detector

    Digital pulse counting detector

  • LR Receiver: RF Spectrum Analyzer

    Single and multiple block scanning modes with coarse and fine views of results

  • LR Receiver: Antenna Inputs

    2x 50Ohms SMA female connectors

  • LR Receiver: Audio Output

    1x TA3 male (mini XLR) balanced output

  • LR Receiver: Audio Output Level

    Adjustable -50 to +5dBu in 1dB steps, unbalanced output level is 6dB lower

  • LR Receiver: Front Panel Controls

    Sealed panel with membrane switches
    LCD for setup menus and monitoring

  • LR Receiver: Audio Test Tone

    1kHz, -50dBu to +5dBu output (balanced), 1%THD

  • LR Receiver: Transmitter Battery

    AA alkaline or lithium
    Timer available for use with alkaline, lithium and HiMH

  • LR Receiver: Audio Polarity Selection

    Normal or inverted

  • LR Receiver: Compatibility Modes

    Digital Hybrid (North American and European)
    Lectrosonics 100, 200 and 300 series
    Lectrosonics IFB
    Non-Lectrosonics modes 3, 6 an 7 (contact the factory for details)

  • LR Receiver: SmartNR (Noise Reduction)

    Off, Normal, Full modes (available in Digital Hybrid mode only)

  • LR Receiver: System frequency response

    32Hz to 20kHz (+/- 1dB) receiver only (see transmitter documentation for overall system response)

  • LR Receiver: Total harmonic distortion

    <0.4 (0.2% typical in Digital Hybrid mode)

  • LR Receiver: Top panel features

    TA3M audio output jack
    2x SMA antenna jacks
    IR (infrared) port

  • LR Receiver: Operating runtimes

    4 hours, AA alkaline

  • LR Receiver: Operating temperature

    -20 to 50 deg. C / -4 to 122 deg. F

  • LMb: Channel

    B1

  • LMb: Frequency Range

    537.600 to 614.375MHz

  • LMb: Frequency Selection

    Steps: Selectable 25 or 100kHz

  • LMb: RF Power Output

    50mW

  • LMb: Pilot Tone

    25 to 32kHz, 5kHz deviation (Digital Hybrid mode)

  • LMb: Frequency Stability

    +/- 0.002%

  • LMb: Deviation

    +/- 75kHz max. (Digital Hybrid mode)

  • LMb: Spurious Radiation

    60dB below carrier

  • LMb: Equivalent Input Noise

    -120dBV (A-weighted)

  • LMb: Input level

    Nominal 2mV to 300mV, before limiting Greater than 1V maximum, with limiting

  • LMb: Input impedance

    2kOhms

  • LMb: Input limiter

    DSP controlled, dual envelope "soft" limiter with greater than 30dB range

  • LMb: Gain control range

    44dB, digital control

  • LMb: Modulation indicators

    Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10dB referenced to full modulation
    LCD bar graph

  • LMb: Frequency Response

    90Hz to 20kHz (+/-1dB)

  • LMb: Low frequency roll-off

    -12dB/octave, 70Hz

  • LMb: THD

    0.2% (typical)

  • LMb: SNR at Receiver Output

    SmartNR: Off 103.5 (no limiting) 108.0 (with limiting)
    Normal: 107.0 (no limiting) 111.5 (with limiting)
    Full: 108.5 (no limiting) 113.0 (with limiting)

  • LMb: Controls

    Top panel slide switch; programmable as power, mute, talkback or no (off) function
    Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls

  • LMb: Audio Input Jack

    Switchcraft 5-pin locking (TA5F)

  • LMb: Antenna

    Galvanized steel, flexible wire

  • LMb: Battery

    2x AA alkaline, lithium, NiMh rechargeable

  • LMb: Battery Life

    Alkaline: 4.5 hours
    Duracell Quantum: 7 hours
    Eneloop 2400 mAH NiMH: 8 hours

  • LMb: Emission Designato

    180KF3E

  • M152 Mic: Sensitivity

    10mV per Pascal / 100mV at 114dB SPL

  • M152 Mic: Impedance

    3 k (2-6k)

  • M152 Mic: Polar Pattern

    Omnidirectional

  • M152 Mic: Freq Range

    20 - 20000Hz

  • M152 Mic: Max Operating Voltage

    10V

  • M152 Mic: Standard Operating Voltage

    2V

  • M152 Mic: Current Consumption

    30uA at 1.3V

  • M152 Mic: Signal/Noise Ratio

    More than 38dB

  • MCSRXLR Cable: Length

    12" / 30.48cm

  • MCSRXLR Cable Connector: Length

    TA3F plug to 3 pin male XLR

  • MCLRTRS Cable: Connector 1

    3.5mm / 0.14" TRS

  • MCLRTRS Cable: Connector 2

    TA3F

  • MCLRTRS Cable: Length

    20" / 50.80cm

  • CCMINI Case: Material

    Vinyl

  • CCMINI Case: Type of Closure

    Zipper

  • CCMINI Case: Carrying/Transport Options

    Carrying handle

  • Dimensions

    LR Receiver (Housing): 3.21 x 2.45 x .84" / 81.53 x 62.23 x 21.34mm
    LMb transmitter: 3.2 x 2.4 x .8" / 81.28 x 60.96 x 20.32mm
    CCMINI Case Interior (L x W x H): 10 x 7.0 x 2.0" / 254.00 x 177.80 x 50.80mm

  • Weight

    LR Receiver: 185.4g / 6.54oz with two AA lithium batteries
    LMb transmitter: 5oz / 141.75g including lithium AA batteries and wire belt clip

About Lectrosonics ZS-LRLMb-B1 L Series Kit, Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, CCMINI Case, B1: 537.600-614.375 MHz

Explore the innovative ZS-LRLMb-B1 L Series Kit, a comprehensive solution for your professional audio recording needs. This high-quality kit is designed by the reputable brand, Lectrosonics, renowned for their durable and reliable audio equipment.

The kit includes an LR Receiver, an LMb Beltpack Transmitter, an M152 Mic, an LRSHOE Camera Shoe Mount, and a CCMINI Case. It operates within a B1 frequency range of 537.600-614.375 MHz, making it a versatile tool for a wide range of audio recording applications.

The LR Receiver and LMb Beltpack Transmitter utilize Lectrosonics' patented Digital Hybrid Wireless technology. This ensures compandor-free audio and compatibility with older analog systems. The wide tuning range of three standard Lectrosonics blocks or 67.5 to 76.8 MHz, depending on the specific frequency band, provides flexibility and adaptability in various recording environments.

The LR Receiver is compact and powered by two AA batteries or an optional battery eliminator. It features an LCD with RF spectrum scanning, SmartSquelch noiseless muting, DSP-based pilot tone for squelch control, and a USB port for firmware updates. The IR sync port facilitates easy transmitter setup.

The LMb Beltpack Transmitter offers 50 mW RF power and compatibility modes for use with analog receivers. It covers three standard frequency blocks and provides 25 or 100 kHz tuning steps for up to 3072 selectable frequencies. The integrated multi-function switch allows for mute or talkback modes, and the wide range input gain control in 1 dB steps ensures precision and control.

The M152 Mic is a high-performance omnidirectional lav mic with a 5-pin plug and water/dust sleeve. The LRSHOE Camera Shoe Mount allows for easy mounting on DSLR type cameras, and the CCMINI Case is a soft-sided, padded, and zippered carrying case for compact wireless systems.

The ZS-LRLMb-B1 L Series Kit is designed for wireless audio transmission in film and video production, live events, and ENG (Electronic News Gathering) applications. It's a testament to Lectrosonics' commitment to delivering professional, high-quality, and innovative audio solutions.

Lectrosonics ZS-LRLMb-B1 L Series Kit, Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, CCMINI Case, B1: 537.600-614.375 MHz Features

  • Comprehensive professional audio recording kit from Lectrosonics, perfect for film, video production, live events, and ENG applications
  • Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, & CCMINI Case
  • Operates within a versatile B1 frequency range of 537.600-614.375 MHz
  • Features patented Digital Hybrid Wireless technology for compandor-free audio and compatibility with older analog systems
  • LR Receiver offers RF spectrum scanning, SmartSquelch noiseless muting, and USB port for firmware updates
  • LMb Beltpack Transmitter provides 50 mW RF power, compatibility with analog receivers, and up to 3072 selectable frequencies

Warranty Information

This used item has a FREE 90-day warranty. See details.

Key Features

  • Includes LR Receiver, LMb Beltpack Transmitter, M152 Mic, LRSHOE Camera Shoe Mount, & CCMINI Case
  • Operates within a versatile B1 frequency range of 537.600-614.375 MHz