Used Tripods & Supports

Used Acebil 1 Stage 100mm Ball Base Aluminum Tripod, 88 lb Load Capacity, 26.4-56.7" Height Adjustment Range

• Used to mount cameras weighing up to 88 lb (40 kg)
• 1-Stage design facilitates height adjustment of the tripod from 26.4 to 56.7" (67 to 144 cm)
• Ground spreader holds the tripod legs firmly, providing enhanced stability
• Made of aluminum pipes, the tripod is light in weight & corrosion resistant

Used Vinten 3819-3 Pozi-Loc Aluminum Tripod Legs with 75mm Bowl, 55 lbs Capacity, Black

• Aluminum Construction
• Pozi-Loc Leg Clamps

Used Sachtler 150 EFP 2-Stadge CF Carbon Fiber Tripod Legs (6386)

• Carbon Fiber construction
• 150mm / 6" bowl base
• Double extension design
• Quick clamping system, locks tripod legs in seconds
• Supports up to 209 lbs

Used Libec T97C Tripod Legs

Used Manfrotto 525MVB Lightweight 2-Stage Pro Video Tripod Legs - 75mm Interface Bowl - Black Anodized

Used Tilta Hydra Arm Mini Cinema Camera Car Crane Pro Kit, V-Mount

• Achieve smooth shots with Hydra Arm's vibration reduction.
• Car mount supports up to 22 lbs; durable & secure.
• Adjustable camera car mount for optimal angles.
• Compact, pro car crane kit; easy to transport.
• Strong grip car mount ensures device stability.

Used Tilta Manfrotto Quick Release Plate Adapter for Float Stabilizing Arm, Black

• Secure locking quick release system for stability.
• Lightweight aluminum alloy ensures lasting durability.
• Manfrotto plate adapter for quick setup on location.
• Compatible with Float Stabilizing Arm & DJI Ronin 4D.
• Quick release plate enables seamless transitions.

Used Kirk Quick Release Monopod Head MPA-2, 80 lb Load Capacity, 3.63" Height, 2.13 Diameter

• Bearings are made from self-lubricating Delrin composite
• Features Kirk's 2.5" Arca-style quick release clamp & a tripod socket that accepts 3/8" threads
• Quick release clamp rotates 90 degrees & the locking nut design allows you to easily operate even while wearing gloves
• Supports up to 80 lb of camera & lens equipment

Used Really Right Stuff Modular Base Plate for FUJIFILM GFX 100S

Used Bogen 503 / 351MVB2 Tripod System, Bogen 503 Fluid Head, 351MVB2 Aluminum Tripod Legs

Used Gitzo G-1549 Carbon Fiber Tripod

Used 3Pod 3Pod Everest T5 4-Section Carbon Fiber Tripod

• Supports 55 lbs: Stable photo tripod base.
• Carbon fiber tripod: Lightweight, durable build.
• Adjustable height: Max 6.6ft with center column.
• Compact storage: 24.4in closed length tripod.
• Quick setup: HyperTwist leg lock system.

Used Acratech GPs Ballhead with Gimbal Feature, Panoramic Head, with all Rubber Knobs, Quick Release / Detent Pin and Level, Supports 25 lbs.

• Weighs .90 lbs with quick release clamp
• Easily holds over 25 lbs (11.4kg) at any angle
• Works as a gimbal head with lenses up to 400 f4.0
• Reduced base diameter of 2.375" (60mm)
• Full movements allow any camera position

Used Syrp Slingshot Fixed Bar with Two Tie-Down Straps

Used 3 Legged Thing Winston 2.0 Carbon Fiber Tripod System, 88 lbs Payload, Metallic Slate Gray

• Carbon fiber tripod: Lightweight & durable build.
• Stable tripod base supports up to 88 lb (40kg).
• Adjustable tripod height: 17.5" to 72.9" (44.6-185.3cm).
• Compact tripod: Folds down to 24" (61.2cm) length.
• Quick twist locks for easy tripod setup.

Used Arca Swiss Monoball Z1 SP Single Pan with Classic Quick Set Device , Supports 132 lbs. (Requires Plate)

• Arca Swiss ball head: Precise control, smooth pan.
• Supports 132 lbs: Durable tripod head build quality.
• Quick set classic device: Arca-Swiss compatible.
• Lightweight tripod head: Only 28.2 oz for travel.
• Friction control: Ensures strong locking ability.

Used Really Right Stuff BH-55 LR Ball Head With B2 AS II Lever Release clamp Really Right Stuff

Used Benro IH2 Single Action Ball Head

• Arca-Swiss Style Quick Release Clamp
• 90 Degree Cutout for Vertical Mode
• Oversized Lock Knob

Used ProMaster Specialist Series SPH36P Ball Head

Used 3 Legged Thing Punks Taylor 2.0 5-Section Magnesium Alloy Monopod with DocZ Foot Stabilizer Kit, Blue

• Magnesium alloy monopod, lightweight & durable build.
• Stable support with DocZ foot stabilizer included.
• Adjustable height monopod extends to 64.17 inches.
• Compact size: folds down to 19.25" for travel.
• Easy setup 5-section monopod with secure locks.

Used Gitzo GM4562 Series-4 Carbon eXact 6-Section Monopod

• Carbon fiber monopod: Lightweight, only 1.48 lbs.
• Stable support: Holds up to 77.2 lbs equipment.
• Adjustable height: Extends to 60.63" for versatility.
• Compact monopod: Folds to 17.32" for easy travel.
• Durable build: CarbonExact for lasting performance.

Used RED QUICK RELEASE PLATFORM (DOVETAIL) 790-0079

Used Vinten Fusion FHR-35 Robotic Remote Pan and Tilt Head, 35 lbs Capacity

• Vinten Head: Smooth pan/tilt for pro shots.
• Precise alignment with robotic camera head.
• Solid build: Supports up to 35 lbs payload.
• Easy leveling ensures stable footage always.
• Secure locking for camera safety guaranteed.

Used eMotimo Spectrum ST4 + Fz Pro Bundle Includes Dana Dolly Integration, V-Mount Battery Plate

Used Promaster GH25K Professional Gimbal Pan Kit