


Picture does not represent the actual item
See what's in the box
See Options
2 Year
$106.99
3 Year
$166.99
4 Year
$227.99
Need help? Ask our experts.
Review Summary
2020-12-23T08:53:18
Bought this kit on black Friday after drooling over it for years. Super impressed by how bright and versatile these tubes are. If you were doing interviews this could could be the only kit you take. I primarily use it for table top product photography, Instead of a giant strip box i'll just use the quasar for detail and rim lighting. Perfect solution for reflective products like jewelry and firearms. I can quickly (without taking up a ton of space) run a perfect strip of light across a product. The kit includes everything you might need to get these tubes rigged and running wither in a 4 bank set up or individually. The only weak spot for me is the baby pin that screws into the quasar plate that holds the tubes. It has two locating pins on either side of a centrally located bolt with a knob on it. so you screw the baby pin onto the plate with this knob. However there is some play and just isn' as secure as id hoped. I highly recommend especiallywhen on sale.
LEE B.
Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.
If we can’t fix it, we’ll replace it at no additional cost.
Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.
Browse our FAQ
Max 50 watts
120v = 0.44 amp
12v = 3.80 amp
4' (1.2m)
47 x 1.75" (119.5 x 4.45cm)
2.53 lb (1.15kg)
Single: 13 x 2" (33.02 x 5.08cm)
Quad: 13 x 8" (33.02 x 20.32cm)
Great all in one kit
By LEE B.
Bought this kit on black Friday after drooling over it for years. Super impressed by how bright and versatile these tubes are. If you were doing interviews this could could be the only kit you take. I primarily use it for table top product photography, Instead of a giant strip box i'll just use the quasar for detail and rim lighting. Perfect solution for reflective products like jewelry and firearms. I can quickly (without taking up a ton of space) run a perfect strip of light across a produc...
View full Review
- Rainbow Linear LED Lamps -
The new Q-LED Rainbow Linear LED Lamp featuring RGBX can paint your world with vibrant saturated color and illuminate it with powerful white light from our 2000 Degree Candlelight to 6000 Degree Daylight Kelvin.
All Rainbow Lamps are equipped with onboard digital interface giving you command of Intensity, Kelvin, Hue & Saturation. Each lamp has a built in Lumen Radio CRMX chip for wireless control. The Rainbow can also be wired to DMX via Cat5 I/O Port.
The lamp is Self Ballasted AC input utilizing Neutrik True1 locking connector as well as locking Barrel connector for DC input.
Features
X-fade White Light
Crossfading our Candlelight diode (2000k) and Daylight diode (6000k) mixing a balanced variable color spectrum. With independent 2000-6000 Degree diodes we give a full range of high quality broad spectrum light and allow color saturation without the muddy effects of RGB derived white light. Includes Kelvin presets at 2000 Degree (2800 Degree ) 3200 Degree 4000 Degree (5000 Degree ) 5600 Degree 6000 Degree
RGB
A rainbow of color at your finger tips. With a full 360 Degree palette for vibrant fully saturated color or mixed with X-fade white light for soft beautiful pastels. Includes color presets for Blue, Cyan, Green, Yellow, Orange, Red, Magenta, Purple.
Low Profile Shape
Easy to hide when space is at a minimum, the slender linear lamps can be mounted tight against a wall or ceiling.
Expandable and Scalable
Stack them in a column to create large LED panels of any size, or end to end for long linear lighting sources. Create geometric patterns and 3D structures or spell out words the options are endless.
Control Panel
No need to pull out your phone or have a Wi-Fi network. The Rainbow comes equipped with an on-board control panel allowing you to set Intensity, CCT, Saturation, Hue, FX and much more.
FX
Onboard effects with adjustable parameters. Including Fire, Police Light, Short Circuit, Paparazzi, Strobe and Rainbow Color Scroll.
DMX Port
With DMX I/O, the Rainbow can be wired for DMX data control and passed through for chaining multiple lamps together.
Wireless Control
Equipped standard with Lumen Radio CRMX wireless transceivers, Rainbow lamps can be controlled remotely via compatible transmitters.
Lead / Follow Mode
Set a master lamp and control all others. Rainbow LED lamps can be set to send or receive commands to and from any other Rainbow making it easy to change the settings of any multi lamp fixture or rig without dialling each lamp.
Energy Efficiency
The Rainbow Lamps vastly outperform traditional Quartz, Halogen and HMI lighting sources in luminous output to power consumption ratio.
Self Ballasted AC Input
Run a line, RGB-X Rainbow Lamps use 100-265VAC (World Power) via Neutrik True1 connect and do not require troublesome external ballasts, power supplies or data boxes.
DC Battery option
Grab a battery, RGB-X Rainbow Lamps can run off of 10-26 VDC via locking 2.1mm x 5.5 barrel connector.
Power Connect & Voltage
Self Ballasted AC range 100VAC to 265VAC via Neutrik True1 connect
DC range 10VDC to 26VDC via 5.5 x 2.1mm Locking Barrel connect
Control
OLED screen with digital interface
Wired DMX via Cat 5/6
Wireless DMX Control by Lumen Radio CRMX Wireless
Robust Industry Standard
Easy Pairing
Compatible with W-DMX Transmitters
Manual Interface
Lead/Follow Mode for operation from one tube to control multiple tubes
- QuasarPlate -
Joining forces with Matthews Studio Equipment and utilizing their new MyWayGrip rigging system we present the QuasarPlate Linear LED mounting system. Built for Q-LED Linear LED Lamps making it simple to mount 1, 2 or 4 Lamps off of a single stand.
The options are endless with MyWayGrip accessories, from a simple 90 Degree Baby Pin to the advanced MSE InfinityArm. Whether a short Q15 1' or the super long 8' Q100, simply snap the lamps into the Q-Blocks and you're set. Articulating light couldn't get any easier.