Mount-It! MI-7901 Sit-Stand Desk Mount for 17-27" Single Monitor Screen, 28.6 lbs Capacity

2018-06-05T20:00:00

Pretty good for just north of $100. Stand is pretty solidly built and easy enough to assemble. Some minor quibbles:-The wrist pad is fairly uncomfortable, but easy enough to remove.-There monitor can only be raised/lowered independent of the keyboard platform. I wish the monitor could be lowered more. I also wish I could move the keyboard platform further away from the monitor-The monitor/platform assembly lists slightly counterclockwise; I wish there was a way to adjust/compensate for this.-The plastic organizer could be made of a better material; it's cheap plastic.Otherwise, it doesn't jiggle too much during normal use, and the cable management is A+. I'd say it's pretty good value for money.

arcticwatersdfamily

Originally posted at

2018-05-28T20:00:00

In need of a standing desk to help with some chronic fascia pain in my side that makes it very uncomfortable to sit for very long, I looked everywhere and found this to be the best — and the only one of its kind among any sit-stand converter available. Not only is the entire product very sturdy and the hydraulic lift feature very helpful, but the dual monitor mounts are also terrific and have no trouble accommodating my 27-inch and 24-inch displays. The separate shelf in-between the monitor mounts and keyboard shelf is also an excellent place to keep remotes, food and drink, glasses, etc. Also, I was especially pleased that the kit wasn't too heavy to keep mounted on my mostly-glass desk.What made this the best and only option for me, though, was the vertical placement of the keyboard and mouse tray lower than the height of the desk mount when in the sitting position. My desk is a bit higher than normal, and this is one of the few products that offered this necessary design feature for my situation (something one would expect to be more common). Curiously, many other mount kits require the keyboard and mouse to be placed either on the desk itself or higher than it. Why anyone would want to reach up to use the keyboard is a mystery to me.One small disadvantage (if it can be called that) is the horizontal placement of the keyboard tray, which is based on the depth of the entire assembly. When in the sitting or standing position, this kit places the tray a few feet out from the edge of my desk. Thankfully I have enough room in my office to accommodate this, but this may not be true for everyone. If in doubt, watch the video (among the other images) and observe the transition between the sit and stand position, and take note of the positioning of the user and the tray in relation to the desk itself.A minor note that I've also found that the assembly can be somewhat heavy to lift into the standing position, even with the aid of the hydraulics. It isn't difficult for me but I wonder if others may find it more burdensome.As far as installation, the entire setup was quite straightforward and took me 2.5 hours. One recommendation I could give—one that wasn't in the manual—would be to place the mounting arm onto the back of the desk as soon as this part has been assembled (early in the process): otherwise, the entire assembly will be too large and unwieldy to maneuver into position.

Craig N.

Originally posted at

2018-05-17T20:00:00

Liked it very much unfortunately it is to heavy for my glass desk and had to be returned.

Jacqueline M.

Originally posted at

2018-04-21T20:00:00

This is the perfect stand up desk. I noticed in my research of other desks that the keyboard sat higher on the regular desktop. With this desk you can lower the keyboard to you all of you desire as it extends out in front of the desk it is connected to. It was very easy to install and the ease of lifting and lowering your desk is amazing. It has made my work day better.

Alex S.

Originally posted at

2018-03-18T20:00:00

I purchased the Mount-It! Sit Stand Desk for my office since I use my computer all day. Keep in mind I have not used this product for a full 24 hours yet, but upon first observation, it will be a beneficial product for my use. There is some assembly required, but I did not feel as though it was too difficult to put together- the instructions are efficient. If you are like me and have 24" screens you may have some difficulties. I had about and inch of overlap with my two monitors, which caused them to veer out on the outside, which would have been a no go for me. However, I was able to make the bar the screens attach to a little longer by drilling out the ends so the monitors slide out further, which reduced the overlap(see picture below). If you have a 27" monitors do NOT purchase this product. Your monitors will overlap and not work properly. Another slight issue that I do not like about the setup is the little bit of shaking when standing and typing. Otherwise it would be perfect. I like that it does not take up my whole desk and it moves around to accompany different standing positions at my desk.

Center C.

Originally posted at

2018-03-01T19:00:00

The product is SO VERY heavy! I can’t understand why since my monitor and keyboard weight maybe 3-4lbs. I liked the instruction photos to put it together; however, an explanation what to do next would have been helpful. The main thing I didn’t like was that the board attached to the keyboard where you can put things like pens phone and a drink doesn’t sit on my desk which caused the keyboard try to be higher than I needed. At the end of the day I had a lot of wrist pain. Also that piece can’t be adjusted so when I tried to move the monitor that keyboard tray moved with it.

Matthew C.

Originally posted at

2018-02-26T19:00:00

Everyone passing by my office commented on how nice my Mount-It! Sit Stand Workstation. I would give a 5 stars if not for one missing screw. I still highly recommended this product to someone who likes to be able to stand or sit to work on the computer and still have plenty of desk space if needed.

luther2017sdfamily

Originally posted at

2018-02-23T19:00:00

Had to build a kick stand for it and is not easily adjustable. Wish we would have gone with the veridesk ...

Tanyasdfamily

Originally posted at

2018-02-21T19:00:00

This mount is constructed using quality components. It was easy to assemble and functions as described. I have the Max size 27 in. monitors installed and they use an adapter sourced from Human-Centric due to the fact that my monitors had no VESA mounting options. The adapters do make the monitors sit away from the original vesa mounts thus I do experience some bounce at all levels, but after a week its really not noticed. The keyboard shelf is not wide enough for a full size keyboard and mouse. The keyboard has to be shifted off the left side to allow enough room to have full control of the mouse across two screens. The Keyboard shelf is constructed to tilt up in a parked position when not in use but if you have a wired keyboard and mouse you have to allow enough slack in the lines to move them. The gas assist for raising and lowering works well and handles the weight.Things I would change: Keyboard Shelf Tilt Up /Tilt Down using an incremental ratchet device, this would allow additional options for Use of the keyboard and being able to lock the shelf would assist when raising and lowering the desk/monitors.An add-on mouse platform would be another great feature.Finally Two 27 in. monitors only allowed to tilt forward or backward makes the viewing area super wide. It would be great if the VESA Mounts would articulate in all directions thus allowing the monitors to tilt inward slightly. Over All this is a good piece of equipment and would purchase another if needed.

Doug J.

Originally posted at

2018-02-20T19:00:00

Works great for sitting to standing desk. I wish the keyboard tray was closer to the monitor. I am thinking of cutting and welding the mount under the upper tray so that the keyboard tray will be closer.

Alissa G.

Originally posted at

2018-02-03T19:00:00

Easy to install, came on time.

Customersdfamily

Originally posted at

2017-12-28T19:00:00

Decent system. Thankfully I have CAD skills and a 3-D printer so that I could 3-D print a 40mm spacer bracket (M4-0.7 x 50mm bolt needed) for my Samsung monitor because my 4K Samsung monitor from Costco has a mount that sticks out making it so that you can’t position your monitor properly for the right angle (see pictures). Yes I could rotate the monitor but then my OCD with Samsung upside down on top of the monitor would drive me insane.

Phoenix M.

Originally posted at

2017-12-11T19:00:00

This is the second one purchased. On smaller a desk it hangs over for shorter people.

Stephen S.

Originally posted at

2017-10-20T20:00:00

Love this standup desk

Kari M.

Originally posted at

2017-10-17T20:00:00

It's a great, well-built product with only a little bounce. Very easy to raise and lower, and the cables are well kept.My two complaints are that the monitors are mounted parallel to each other instead of being tilted inward a little to face the user; and they are not easily adjustable vertically. I wear contacts most of the time but occasionally need to wear glasses. My glasses have progressive lenses, meaning I have to tilt my head backwards to see the screen properly. I really need to be able to easily adjust the monitors lower on those days.

jevanssdfamily

Originally posted at

2017-10-16T20:00:00

Solid Product. Need an additional person to fix it. You can rotate and adjust height etc. Little shaky while typing in the keyboard(it may be because my table which is holding the workstation is not firm). Overall, like the materiel. Highly recommend for home office.

Thiyagara G.

Originally posted at

2017-10-09T20:00:00

Awesome standing work station apparatus, super sturdy and well made, heavy duty, cord keepers are a great addition, and I love the organizer tray!!

Monica B.

Originally posted at

2017-09-28T20:00:00

Solves my back problems beautifully. I have a Mac so assembly was a little more difficult. I gave it 4 stars because it takes up a lot more room than I thought it would. My office is very small. Also, it would be good to explain that if you desk is not a table, there will be a need to drill into the back side of the desk in order to get the clasp on. This made installation a bear. Other than that, it is of good quality and it SAVED my back.

Reneesdfamily

Originally posted at