Onkyo TX-NR585 7.2-Channel Network A/V Receiver, 80W per Channel

SKU: ONTXNR585

This item is no longer available.

Recommended Alternatives

Overview
Compare
Specs
Q&A

Questions & Answers

Reviews about this item

Review Summary

Onkyo TX-NR585 Specifications

Amplifier

Amplifier

Jump to...
  • Channels

    7.2

  • Power Output per Channel

    80 W per channel @ 8 Ohms, 20 Hz to 20 kHz, 0.08% THD, 2-channels driven, FTC
    170 W per channel @ 6 Ohms, 1 kHz, 10% THD, 1-channel driven

  • Dynamic Power per Channel

    85 W (8 Ohms, front)
    125 W (4 Ohms, front)
    160 W (3 Ohms, front)

  • THD & Noise

    0.08% (20 Hz to 20 kHz, half power)

  • Input Sensitivity and Impedance

    200 mV / 47 kOhms

  • RCA Output Level and Impedance

    Subwoofer Pre-Out, Rated: 1 V / 470 Ohms
    Zone Line Out, Rated: 200 mV / 2.3 kOhms

  • Phono Overload

    70 mV (MM, 1 kHz, 0.5%)

  • Frequency Response

    10 Hz to 100 kHz / +1 dB, -3 dB (Direct Mode)

  • Tone Control

    Bass: +/-10 dB, 90 Hz
    Treble: +/-10 dB, 7.5 kHz

  • Signal-to-Noise Ratio

    106 dB (line, IHF-A)
    80 dB (phono, IHF-A)

  • Speaker Impedance

    4 to 16 Ohms

  • Damping Factor

    >49 (front, 1 kHz, 8 Ohms)

  • Amplifier Class

    Linear Class A/B

  • Input Sensitivity/Output Level

    Impedance: 1 Vp-p / 75 Ohms (component Y)
    0.7 Vp-p / 75 Ohms (component PB/CB, PR/CR)
    1 Vp-p / 75 Ohms (composite)

  • Component Video

    +0 dB, -3 dB (Frequency Response)

Processing

Jump to...
  • DAC

    384 kbps/32-bit

  • Dolby

    Dolby Atmos (5.2.2), Dolby TrueHD, Dolby Digital Plus

  • DTS

    DTS:X, DTS Neural:X, DTS-HD Master Audio

  • Calibration

    AccuEQ with AccuReflex

Tuner Section

Jump to...
  • Tuning Frequency Range

    FM: 87.5 to 107.9 MHz
    AM: 530 to 1710 kHz

  • FM/AM Preset Memory

    40 stations

Connectivity

Jump to...
  • Wi-Fi

    Dual-band 2.4 / 5 GHz IEEE 802.11a/b/g/n

  • Bluetooth

    Version 4.1 + LE, A2DP v1.2 & AVRCP v1.3

  • AirPlay

    Yes

  • Bi-Amp Capability

    Yes, for front speakers

  • Audio Return Channel (ARC)

    Yes

  • Inputs

    6x HDMI
    2x component video
    2x composite video
    2x optical TOSLINK
    1x digital coaxial
    6x stereo RCA
    1x stereo RCA phono with ground screw
    1x 1/8" (3.5mm) aux (front)

  • Outputs

    1x HDMI
    1x stereo RCA Zone 2
    2x subwoofer pre-out
    1x 1/4" (6.35mm) headphone (front)

  • Other Interfaces

    1x Ethernet LAN
    1x USB
    1x 1/8" (3.5mm) calibration microphone (front)
    1x AM antenna
    1x FM antenna

  • Speaker Connectors

    9x binding post pairs

General

Jump to...
  • Power Requirements

    120 VAC, 60 Hz

  • Power Consumption

    Typical: 460 W
    No Sound: 55 W
    Standby: 0.15 W

  • Dimensions (W x H x D)

    17.1 x 6.8 x 14.9" (435 x 173.5 x 379.5mm)

  • Weight

    20.7 lb (9.4kg)

  • UPC Code

    889951001225

About Onkyo TX-NR585

More power, more channels, more thrills!

With nine channels of high-current amplification, the TX-NR787 fully unlocks DTS:X and Dolby Atmos movie soundtracks with a 5.2.4-channel speaker layout at THX Certified Select theater-reference volume. Alternatively, you can also use the extra channels to drive speakers in Zone 2 and Zone 3.

Dual-band Wi-Fi links the receiver to your desired multi-room platform via DTS Play-Fi technology, FlareConnect, or Chromecast built-in that also works with the Google Assistant. AirPlay and Bluetooth wireless technologies are built in, and onboard streaming services include Amazon Music, TIDAL, Spotify, and TuneIn. Future-ready, the receiver has HDMI supporting 4K/60p, BT.2020, HDR10, Dolby Vision, and HLG video pass-through. This muscular A/V hub waits to enrich your entertainment life.

Works with Sonos
With Sonos Connect, the awesome home theater you've built around your Onkyo receiver can now be part of your existing Sonos Home Sound System, or the start of a new one. Instantly upgrade the music streaming capability of your home theater with Sonos Connect and a free firmware update. After a simple set up, your Onkyo A/V receiver will seamlessly tie into Sonos, instantly waking, changing inputs and playing at the volume you command through the familiar Sonos app.

THX Certified Select Reference Sound
THX Certified Select guarantees high-volume theater sound in your home. To gain certification, amplifiers must pass the industry's most severe bench-tests covering every aspect of audio performance. THX Certified Select components are best in rooms where screen-to-seat distance is about 10 ft. (3 m), and the room volume about 2,000 cubic feet (57 m3).

Unleash a complete Dolby Atmos and DTS:X experience
Enjoy full object-based audio coverage with 5.2.4-ch or 7.2.2-ch speaker layouts. For movies featuring Dolby Atmos and DTS:X soundtracks, individual sounds are mixed to play through any speaker, and are not tied to specific channels. Effects move around with captivating realism, transporting you into the film.

Dolby and DTS solutions for 3D upmixing
DTS Neural:X technology and Dolby Surround find cues in legacy soundtracks and upmix for speaker systems including height channels. Cross-compatibility with Dolby TrueHD, DTS-HD Master Audio technology, and Dolby Digital creates 3D sound for movies on DVD, Blu-ray Disc, or video streaming service.

Connections for custom installation
The TX-NR787 features a 12 V trigger output for an external component and an IR input for remote-control range extension. It supports IP control and RS232, enabling configuration via PC and integration into a home automation system. An optional rack-mount kit is available to complete your custom install.

Chromecast built-in works with the Google Assistant
Stream any music from your smartphone, laptop, or PC to the receiver with ease. Control playback with Chromecast-enabled apps from your iPhone, iPad, Android phone or tablet, Mac or Windows laptop, or Chromebook. If you have a device with the Google Assistant built-in, you can control music on the TX-NR787 by voice.

Ready for DTS Play-Fi multi-room audio
DTS Play-Fi allows you to enjoy quality music from online services, media server, and mobile device to any number of compatible products using Onkyo Music Control App. DTS Play-Fi technology can synchronize music in every room, and family members can use their own device to listen in a room or group of rooms.

Supports 4K HDR, BT.2020, 4K/60 Hz, and HDCP 2.2
Rear HDMI inputs, Main Out, and Sub Out pass 4K HDR video in HDR10, HLG, and Dolby Vision formats through to compatible displays. They support BT.2020 4K video standard, 4K/60 Hz playback, and HDCP 2.2.

AccuEQ evolves into AccuEQ Advance
AccuEQ Advance enhances speaker calibration precision. It employs three-point measurement to remove standing waves from your listening space. Standing waves occur when sound from the speakers resonates with sound reflected from the walls, compromising audio quality and bass response. The technology also detects and compensates for background noise, such as the hum from an HVAC, to ensure accurate equalization.

AccuReflex
AccuReflex technology aligns the phase of up-firing "height" speakers with the sound coming directly from your other speakers. Any delay is resolved so that everything arrives at your ears at the same time. The result is cohesive reproduction of object-based soundtracks.

Three zone sound... just add speakers
With a 5.2-ch theater layout in Zone 1 (Main), use the other four channels to drive speakers in Zone 2 and Zone 3. As well as analog distribution, dedicated DACs enable digital sources* to be synced across rooms simultaneously, or a unique source to be played in every zone at once. Zone 2 line-level output is great for sharing to a hi-fi system.

Manage Music with Onkyo Controller app
Onkyo Controller app collects streaming services and network-attached audio into one interface. Select sources, control playback, and distribute audio.

Wi-Fi, AirPlay, and Bluetooth wireless connectivity
Built-in 5 GHz/2.4 GHz Wi-Fi provides network stability for streaming, Onkyo Controller app, and multi-room audio, while Bluetooth wireless technology is on board for easy mobile or laptop connection.

Music lovers have easy access and control of their entire iTunes music library through their receiver. Find and stream music from iPad, iPhone, Mac, and PC over the Apple AirPlay wireless audio platform.

More streaming services and internet radio
Amazon Music, Spotify, TIDAL, Deezer, Pandora, and TuneIn are all baked in, making entertainment selection easy using Onkyo Controller.

FlareConnect Wireless Multi-Room Audio
FlareConnect shares audio from network and external audio input sources between compatible components. Enjoy effortless multi-room playback of LP records, CDs, network music services, and more with supported components and speaker systems. Music selection, speaker grouping, and playback management across the home are built into the Onkyo Controller app.

384 kHz/32-bit Hi-Grade DAC
No matter what you're listening to, it will sound powerfully full, clean and clear. A premium-quality AK4458 digital-to-analog converter from Asahi Kasei implements unique low-distortion filtering technologies for clear sound, and unlocks the full potential of any audio format, including compressed, lossless, and hi-res audio (MP3, WMA, FLAC, WAV, OggVorbis, AAC, Apple Lossless, DSD 5.6 MHz, LPCM, and Dolby TrueHD).

Smooth Analog Signal
Onkyo developed Vector Linear Shaping Circuitry (VLSC) to reassemble the audio signal to its original form following processing. Unlike conventional filters, VLSC removes pulse noise generated in D/A conversion, allowing the sound wave to be reproduced with extremely high fidelity for a smooth analog signal.

Dynamic Audio Amplification
High-current power is proven by the ability to drive four-ohm speakers, which will test the toughest multichannel amplifier. High current equals better control, dynamics, fluency, and expressiveness. Non-phase-shift amp circuitry presents a clear and cohesive audio image, while VLSC removes high-frequency noise from digital audio sources for natural reproduction.

Onkyo's dynamic audio amplification delivers massive power at 220 W/Ch (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)/ 100 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven).

Additional Features

Amplifier
• # Channels: 9.2
• Power Watts/Ch (8 Ohms 20-20kHz, 2 Channels Driven, FTC): 100 Watts, 0.08% THD
• Power Watts/Ch (6 Ohms 1kHz, 1 Channel Driven): 220 Watts, 10% THD
• Dynamic Audio Amplification: Yes (for Clear and Realistic Sound)
• H.C.P.S. (High Current Power Supply): Yes
• Non-Phase Shift Amplifier: Yes
• THX Certified: Yes
• Continuous 6 Ohms Rated: Yes
• Certified 4 Ohms Performance: Yes
• Discrete Output Stage Circuitry: Yes
• Amplifier Design: Linear Class A/B
• Bi-amp Capability For Front: Yes

Processing
• Dolby Atmos: Yes
• 32-Bit Digital Signal Processing Engine: Yes
• Dolby Decoder: Dolby Atmos, True HD, Dolby Surround
• DTS:X: Yes
• DTS Decoder: DTS:X, DTS-HD Master Audio, Neural:X
• ONKYO GAME Surround Modes: Yes (Rock, Sports, Action, RPG)
• VLSC for Noiseless Audio Processing: Yes (Fronts)
• THX Processing Mode: Yes
• AccuEQ Room Calibration: Yes (with AccuReflex)
• Phase-Matching Bass Boost Yes
• irect/Pure Mode: Yes/ -
• Advanced Music Optimizer: Yes
• 384K/32 Bit DACs: Yes

Connectivity
• Analog Audio IN: 6
• Phono Input: Yes
• Digital Audio IN (OPT/COAX): 2 / 1
• Composite Video I/O: 2 / 0
• Component Video I/O: 2 / 0
• Front Panel HDMI: Yes
• Front-Panel A/V: 1 (Analog)
• USB Input: (Rear)
• HDMI I/O: 7 / 2 (Main/Sub)
• HDMI 4K/60 Hz- Capable HDMI Terminals: Yes
• HDCP 2.2 Copy-Protection Compatibility: Yes
• HDMI Support for High Dynamic Range: Yes
• HDMI Support for 3D, Audio Return Channel and CEC: Yes
• Dolby Vision, HDR10, HLG, BT.2020 Support: Yes
• HDMI Support for Deep Color, x.v.Color, LipSync: Yes
• HDMI Support for DVD-Audio, SACD, Multichannel PCM: Yes
• Analog To HDMI Upconversion: Yes
• 4K Passthrough: Yes
• Analog Pre-Outs: Subwoofer (x2)
• Powered Zone 2: Yes
• Powered Zone 3: Yes
• Zone 2 Line Out: Yes

Onkyo TX-NR585 Features

  • TX-NR585 Features:
  • THX Certified Select for theater-reference sound quality
  • Supports 5.2.4-channel Dolby Atmos and DTS:X playback
  • 220 W per channel
  • HDMI 7 in (1 front) / Main Out, and Sub Out supporting 4K/60 Hz, HDR10, HLG, Dolby Vision, BT.2020, and HDCP 2.2 pass-through
  • Dynamic Audio Amplification with 4-ohm speaker-driving capability
  • Chromecast built-in
  • Works with the Google Assistant
  • 5 GHz/2.4 GHz Wi-Fi, FlareConnect, DTS Play-Fi, AirPlay, Amazon Music, Spotify, TIDAL, Deezer, Pandora, TuneIn ADVANCED FEATURES
  • HDMI terminals supporting HDR10, HLG, Dolby Vision, BT.2020, and 4K/60 Hz pass-through compliant with HDCP 2.2
  • 5.2.4-channel Dolby Atmos playback and Dolby Surround upmixing for audio formats including DTS codecs
  • 5.2.4-channel DTS:X playback and DTS Neural:X 3D upmixing supporting Dolby formats
  • AccuEQ Advance room acoustic calibration with AccuReflex phase alignment for Dolby Atmos-enabled speakers
  • Stable 5 GHz/2.4 GHz Wi-Fi connectivity
  • Supports Onkyo Controller app for intuitive multi-room operation
  • Audio streaming with Chromecast built-in and voice control through devices with the Google Assistant built-in
  • DTS Play-Fi multi-room audio with Onkyo Music Control App
  • Supports audio streaming from iPad, iPhone, Mac, and iTunes via AirPlay
  • Amazon Music, Spotify, TIDAL, Pandora, and Deezer music streaming services and TuneIn internet radio
  • FlareConnect multi-room audio distribution to compatible components
  • Hi-Res Audio playback including DSD 5.6 MHz/2.8 MHz, 192 kHz/24-bit FLAC, WAV (RIFF), AIFF, ALAC, and Dolby TrueHD
  • Powered Zone 2 and Powered Zone 3 speaker outputs, Zone 2 line-output with DAC supporting digital and analog audio playback
  • Bluetooth wireless audio technology for mobiles, laptops, and PCs (Version 4.1 + LE, Profile: A2DP v1.2, AVRCP v1.3)
  • Advanced Music Optimizer improves compressed digital audio quality, including Bluetooth audio
  • Built-in low-noise phono pre-amp equalizer for Moving Magnet (MM) cartridges
  • Support for front L/R bi-amping
  • 480i de-interlacing (480i to 480p) via HDMI for legacy video formats
  • Amplification Features:
  • 220 W/Ch (6 ohms, 1 kHz, 10% THD, 1 channel driven); 100 W/Ch (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 channels driven, FTC)
  • Dynamic Audio Amplification for thrilling multichannel and stereo sound
  • High-current power drives large speakers with 4-ohm resistance
  • H.C.P.S. (High Current Power Supply) customized transformer
  • VLSC (Vector Linear Shaping Circuitry) high-frequency noise removal technology (Front L/R channels)
  • Non-phase-shift amplification circuitry for a clear and cohesive audio image
  • Discrete output stage circuitry for low distortion
  • Processing Features:
  • Dolby Atmos and DTS:X reproduction (supports 5.2.4 channels)
  • HDMI support for 4K/60 Hz, HDR10, HLG, Dolby Vision, 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio, DSD, DVD-Audio, Super Audio CD (SACD), multichannel PCM, and CEC
  • High-grade AKM (AK4458) 384 kHz/32-bit multichannel DAC
  • PLL (Phase Locked Loop) jitter-cleaning technology for S/PDIF audio
  • 32-bit Digital Signal Processing (DSP)
  • Listening modes for gaming (Rock, Sports, Action, and RPG)
  • Theater-Dimensional virtual surround-sound function
  • Direct Mode for audio reproduction close to original source quality
  • Independent tone controls (bass/treble) for all channels
  • Connection Features:
  • 7 HDMI inputs (1 front), Main Out, and Sub Out
  • Powered USB terminal (5 V, 1 A) for audio playback (rear)
  • 2 composite video inputs and 2 component video inputs
  • 3 digital audio inputs (2 optical and 1 coaxial)
  • 6 analog audio inputs, 1 stereo 1/8" (3.5mm) analog input (front)
  • Phono input (MM) and equalizer for turntable connection
  • 2 subwoofer pre-outs
  • 1/4" (6.35mm) headphone jack (front)
  • Speaker setup mic input (front)
  • Banana-plug-compatible speaker posts
  • 12 V trigger outputs, IR input, IP control, and RS232 support
  • Detachable power cable
  • Other Features:
  • Crossover adjustment for each channel (40/50/60/70/80/90/100/120/150/180/200 Hz)
  • A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz)
  • Graphical User Interface with overlaid On-Screen Display via HDMI
  • Quick Setup Guide via GUI
  • Easy-to-use input selector buttons
  • Economical HDMI pass-through and Network Standby functions
  • 3-mode display dimmer (normal/dim/dimmer)
  • 40 FM/AM random presets
  • Simple remote control
  • Rack-mounting kit (optional)

Key Features

  • THX Certified Select Reference Sound
  • 100 W/Ch (8 Ohms), 220 W/Ch (6 Ohms)
  • 5.2.4 or 7.2.2-Ch Dolby Atmos & DTS:X
  • HDMI 7 In (1 front) / Main Out and Sub Out
  • 4K/60 Hz, HDR10, HLG, Dolby Vision, BT.2020, and HDCP 2.2
  • Powered Zone 2/3 Speaker Outputs and Zone 2 Line Output

What's in the box:

  • TX-NR585 7.2-Channel Network A/V Receiver
  • Power Cord
  • Remote Control
  • 2x AAA Batteries (R03)
  • Indoor FM Antenna
  • AM Loop Antenna
  • Speaker Setup Microphone
  • Quick Start Guide
  • Basic Manual
  • Onkyo 2 Year Limited Warranty