


Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Minimum: +/- 4.5V
Typical: +/-15V
Maximum: +/-18V
-25 TO 50 Degrees C
-60 Degrees TO 80 Degrees C
18MA
0.2MV
Minimum: 0.05MA
Typical: 0.1MA
Maximum: 0.15MA
Minimum:110UA
Typical: 190UA
Maximum: 300UA
112dB
48Khz (RL=600 Ohms)
50MHz (@ 100kHz)
Minimum: 38V/uS
Typical: 52V/uS
Maximum: 55V/uS (f = 10KHz; RS = 2K)
50M Ohms (K Ohm)
>90dB (f = 1KHz; RS = 600 Ohms)
0.002% (% 1KHz @ 2V Output RL=600 Ohms)
0.3 Ohms (AV = 30dB Closed Loop f = 10KHz, RL = 600 Ohms)
5060299176706
The Dual Discrete op-amp is specially designed for audio and is among the most musical sounding dual discrete op-amps out there. It is available in DIP 8 format and can be used in any CD player, DAC, or preamplifier that currently runs DIP 8 based IC dual op-amp types.
The overall soundstage and transient detail will be greatly improved when used in pretty much all audio equipment that it can physically be fitted to. It has a very low noise Jfet front end so it can run with input impedances above 1M Ohms if needed. It can replace the following, provided the equipment it's being used in has 22mm of height clearance and 5mm side clearance (per side).
OPA2604
OPA2134
TL072
NE5532
LM4562
OP275
OP285
Please check that the PSU can supply the extra current needed, especially if replacing more than one existing IC op-amp with our op-amp as with all discrete types, they do draw more current. Please refer to the spec sheet for details.
The Orange Dual Discrete Op-Amp is unity gain stable. When using it in new designs where gain (inverting or non inverting) is being added, a feedback loop bypass capacitor of 15pf is all that's needed to completely stabilise it. The spec-sheet shows a max +/- rail voltage of 18 volts.
All tests up until now have been conducted with this voltage along with +/-15 volts. As soon as we have test results using it on rails of +/-24 volts