Peavey FX 2 24 24-Input Channel Four-Bus Mixing Consoles Mixer, 20Hz to 20kHz Frequency Response, -129dBu ENI, 120V AC Power
SKU: PV03600970
This item is no longer available.
Share:
Overview
Compare
Specs
Q&A
About Peavey FX 2 24
The Peavey new FX2 features twice the processing power of the original. FX2 Series mixers feature new, Peavey-exclusive technology to enhance live sound reproduction and project studio recording, including Silencer mic preamps, which allow very high gain with low noise and distortion for crystal-clear signal reproduction.
The four pre-fader auxes per channel provide four monitor mixes, while the two post-fader auxes are ideal for adding effects (built-in or outboard). These mixers also include dual DSP engines that allow multiple simultaneous effects assignable to any channel via aux 5/6. Onboard effects include reverb, reverb enhanced, delay, compression, expander, de-esser, chorus, flanger, tube emulator, vocal enhancer and gate. Chain two processors together on each of the two available effects windows. The digital output processing section includes Feedback Ferret, dual 5-band Parametric EQ or dual 28-band Graphic EQs, digital delay lines and dynamics/limiters. The output section can be configured for Stereo, Dual Mono or Subwoofer mode with a built-in electronic crossover.
The mixer features dual USB 2.0 ports and the "A" USB connector allows streaming of digital audio directly to a computer or memory stick as well as exclusive, built-in MP3 compression. You can record your rehearsals, songwriting sessions or live performances directly to an inexpensive USB stick ... no other hardware needed and then transfer them to your computer to burn CDs or to transmit electronically. Or insert a memory stick to playback audio files for use between sets.
Peavey FX 2 24 Features
- Silencer mic preamps with current-source dual feedback design
- 12 XLR mic inputs on FX2 16, 20 XLR mic inputs on FX2 24, 28 XLR mic inputs on FX2 32
- Two stereo channels with direct-to-L/R assignment capability
- Three-band channel EQ on all input channels
- Sweep able mid-frequency control on all mono input channels
- Variable low-cut filter on all mono input channels, off to 300Hz
- Inserts on all mono channels
- Four-bus design with direct group outputs and L/R assignment
- Four monitor sends per channel, pre-fader
- Two effects sends per channel, post-fader
- Pan and PFL on each channel
- Multi-point clip detection
- Signal presence LEDs on every input, group and return
- Mute switches with LED indicator on every input, group and return channel
- 48-volt phantom power switch
- Dual DSP engines for output processing, dual effects and digital I/O
- Output processing includes EQ, Delay and Compressor/Limiter
- Large LCD graphics user interface
- Dual USB ports
- Direct streaming of audio to and from your computer
- Built-in MP3 compression, direct recording and playback via USB removable data storage device
- Media inputs with level control assignable to L/R mix
- Headphone output with level control
- 12V BNC lamp jacks & 100mm faders
- Feedback Ferret - Automated Feedback Elimination