Shape Telescopic Black Handle Arri Rosette Cuff Kit

Not only can you switch between 15 to 19 mm LWS or Studio - you won't need to remove your accessories to do it. Connect the Arri Rosette Handles to the rod block, clip the rod block onto your rig, and you're good to go. Case included. Use the screwdriver included in the Cuff Kit to shorten the Telescopic Handles to 3". When you're short on space, it makes all the difference. Since our Handles offer 360 degrees of adjustment, you can clip the cuff kit above or below the rods - make it comfortable!

15 mm LWS cuff rod block Arri rosette (CUF15)
The Shape Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The Shape cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

15 mm studio spacing cuff rod block Arri rosette (CUFST)
The Shape Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The Shape cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

19 mm studio cuff rod block Arri rosette (CUF19)
The Shape Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The Shape cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.

Telescopic Shape black handle Arri rosette (HAND12SHADOW)
Left and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360 Degree . The one near the rosette gives you more option to position the arm for your comfort.

Shape is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.