SmallRig Hot-Swap UPS Adapter Plate for NP-F Type Batteries

SmallRig Adapter Plate for NP-F Type Batteries (Supports UPS) 5536 is designed to provide continuous power for mirrorless cameras, monitors, and other equipment using NP-F series batteries. This plate can be mounted using a V-mount plate or the bottom 1/4"-20 threaded holes and accommodates one or two NP-F batteries to power your gear. When two batteries are installed, the hot-swap feature allows you to replace one battery without shutting down connected devices, ensuring an uninterrupted power supply (UPS).

Equipped with multiple output ports-D-Tap, DC (5521), and USB-C-this adapter plate allows you to power several devices simultaneously. The ports are strategically placed to avoid interference with camera operation and the use of top handles. The USB-C port supports up to 36W of input, enabling the plate to function as a charging dock.

An integrated intelligent management chip optimizes both discharging and charging: during discharging, it drains the battery with the lower charge first, switching to parallel output when the voltage is low to enable hot-swaps and power high-demand devices. For charging, it prioritizes the higher-charge battery and then switches to simultaneous charging to enhance efficiency.

An independent power switch allows you to check the power status and activate with a single press, while a long press (2s) disables output for all connected devices. This simplifies operation and conserves power by eliminating the need to unplug cables after a shoot. Independent LED indicators for each channel provide clear, at-a-glance battery status updates.

Power Switch
• Single Press: Displays battery level & enables output
• Long Press (2s): Disables output

Power Indicator (Red)
• Lights up when powered on; turns off after - 10 seconds if no load is detected
• Solid Red: Normal operation
• Rapid Blinking: Abnormal state (e.g., over-current, over-voltage)

Battery Status Indicator
Lights up when powered on; turns off after - 10 seconds if no load is detected. Remains on if a load is connected

During Discharge:
• Solid Green: Battery level >=20%
• Solid Red: Battery level 10%-20%
• Slow Blinking Red: Battery level < 10%

During Charge:
• Slow Blinking Green: Charging in progress
• Solid Green: Charging complete

Workflow Non-Stop
Your NP-F hub for non-stop shooting

The Ultimate Compact Power System
• Reliable Power Delivery
• Versatile Power Ports
• 2-Bay Fast Charging
• Smart Power Management
• Independent Power Control
• Power Status Indicators
• 3 Mounting Options

Your No-Downtime Hub
2-bay design ensures a continuous power stream by automatically switching batteries upon depletion

A Complete Power Solution
Strategically placed D-Tap, DC & USB-C ports ensure clutter-free operation and simultaneous multi-device powering

Power Two at Full Speed
36W dual-channel fast charging to stay in your flow Fully charge 2 NP-F550 batteries in only 2.5h

Note: When input power exceeds 36W, the system switches to single-battery charging mode

Advanced Power Management: Optimized Battery Performance
• Prioritizes discharging low-battery cells
• Ensures uninterrupted power with automatic battery switching
• Powers high-demand devices via parallel dual-battery discharge
• Prioritizes charging high-battery cells for enhanced efficiency

Comprehensive Protections
Advanced chip ensures secure charging with overvoltage, overcurrent & over-temperature protection

Independent Power Control
• Single Press: Check power or activate
• Press and Hold: Cut all power
• Auto-Sleep: Automatic standby when not in use

Universal Mounting Solution
• V-Mount Installation
• Mount via Threaded Hole

Note: When not in use or after use, please remove the batteries or press and hold the power switch for 2 seconds to disable output