Used Kondor Blue Ultimate Rig for Canon R5/R6/R Cage, Space Gray

- Full Cage with Top Handle -

Remote Trigger Top Handle
Start/Stop Record button for video and stills

Arca Swiss Quick Release System
Rapidly remove the camera from the cage for Stills or gimbal use.

Multiple Points of Contact
Cage remains solidly mounted to the camera to prevent wiggle and allow for large setups.

Built-In NATO Rails
Both on Side on Top of Cage.

Cold Shoe Safety Pin
Prevent the notorious sliding issues that plague cold shoe accessories.

HDMI & USB C Cable Clamp
Prevent damaging the micro-sized ports on the camera and losing signal.

ARRI Standard Accessory Mounts
Locating pins to prevent twist on every side of the cage.

Over 70 Threaded Holes
1/4" and 3/8"

Perfect Balance
Designed to maintain ideal center of gravity with most lens sizes for effortlessly maneuverability from top handle

Comfortable
Ergonomically designed for handheld use

- Universal 15mm LWS ARRI/501 Baseplate Side -
This Baseplate (15mm) is an ARRI standard bridge plate and supports 15mm LWS rods. The industry standard dove tail connection and 15mm rod support make it ideal to create a setup with a big lens and a large matte box. The Manfrotto 501 plate is the most common in this field and our "Top Side Loading" Baseplate makes it easy and fast to mount the camera from one setup to another.

It features an ARRI-standard dovetail and supports 15mm LWS rods. This baseplate has a side-load camera plate system, which lets you easily mount your camera from the top instead of having to slide it in from the front.

A Manfrotto 501-standard camera plate is included. It comes with 1/4"-20 and 3/8"-16 mounting screws and offers 1/4"-20 and 3/8"-16 tripod mount threads on the bottom. It's also rubber-padded to minimize twisting and prevent scratching.

- Rosette Arms, Grips & Clamp Bundle -
The bundle includes a right and left pair of rosette hand grips, a right and left pair of adjustable extension arms, and a standard 15mm rod block. The aluminum camera rig handles are lined with textured rubber for a comfortable grip and they connect using quick-release rosettes.

The extension arms allow you to connect the handles and they can adjust to your preferred position and length. The extension arms then connect to the 15mm rod block, which can be mounted on a pair of separately available 15mm rods to complete your shoulder rig.

- Cine V-Mount Battery Plate -
Our Thin V-Mount Battery Plate features multiple DC outputs (5, 7.4, 12, 15V, and a D-Tap), enabling you to power multiple devices simultaneously.

Battery Plate also features two 15mm rod connectors, allowing you to mount it to an existing rig via two blue locking levers. 15mm rods are sold separately.

The plate includes a switchable 7.4/8.4V 1.35mm barrel output, a 5V 2.5mm barrel output, a 12V 2.5mm barrel output, and a D-Tap output.

The 2.5mm DC barrel charger input allows you to charge the mounted battery with our AC Charger Cable (sold separately). This port will also allow you to power your plate and accessories if no battery is mounted. (BLINKING light means charger cable is plugged in but no battery is mounted; GREEN light means the battery is fully charged; RED light means Battery is charging)

- 15mm PPSh Rods -
Lightest 15mm aluminum rod in the industry that doesn't sacrifice strength. Used for accessories like follow focus, matte box, lens support, servo motors, and more.

Extend to custom length with M12 Rod Extension Connectors (sold separately)

- RF Cine Cap -
Kondor Blue Cine Caps protect your camera's port and sensor while adding a high-end look to your rig. Crafted from a single block of aerospace-grade aluminum alloy metal and anodized in a sleek gray finish, these caps feature engraved lens orientation markings for quick mounting and precise ridges along the edge to aid in gripping. They also click and lock into place like a lens to avoid accidents. Expert quality and design is evident in the product through to its packaging

- D-Tap to LPE6 Dummy Battery Cable -
The Coiled D-Tap to LP-E6 Dummy Battery Cable allows you to power any monitor or camera from a D-Tap power source. It regulates the 12-17V input voltage range of D-Tap sources to deliver a 7.4V output to your monitor via the dummy battery.