Used Miller CX8 Fluid Head with 75 Sprinter II 3-Section Carbon Fiber Tripod and 593 Basic Mid-Level Spreader

The 3747 CX8 75 Sprinter II 2 Stage (carbon fiber) system combines the 1620 75 Sprinter II tripod and CX8 fluid head for fast and easy set-ups. Designed for the creative professionals needing a stable, higher capacity solution, it is capable of balancing from a broadcast down to a DSLR camera, thanks to CB Plus technology and Millers precision fluid drag system.

The CX8 employs CB Plus technology providing 16 positions of counterbalance, 5+0 settings of Miller's fluid pan and tilt drag with 60mm of camera plate travel, enabling you to match your camera configuration to any shot.

The CX8 is matched with the 2-stage 75 Sprinter II (carbon fiber) tripod and mid-level spreader providing speed of set-up and incredible height range all in a light weight carbon fiber system.

- CX8 Fluid Head -
Compass X8 is the premium head in the 75mm ball levelling Compass X series. Designed for camera rigs from 0 to 26.46 lbs, with CB Plus 16 balance positions and 5 levels of fluid drag, it sets the standard in professional compact camera supports. A feature packed fluid head, CX8 is ideal for cinematic and documentary, where the payload and center of gravity changes frequently due to lens or accessories swapping.

Constructed of lightweight high-strength die-cast alloy and tough composite polymers and featuring precision ball bearings Miller have combined robust engineering with silk smooth pan and tilt camera movements. Built for extreme conditions the CX8 performs consistently over a wide range of temperatures and environments giving you confidence when you are working. The CX8 is a precise, smooth pan & tilt head for small to medium camera configurations for the creative professional. CX8 meets the demands for reliability and "THE RIGHT FEEL" that are hallmarks of Miller, enabling you to tell your story.

- 75 Sprinter II Carbon Fiber Tripod with Mid-Level Spreader -
The 1620 75 Sprinter II 2-stage, carbon fiber, mid level spreader tripod employs the patented Miller design that enables the leg stages to be adjusted independently via two leg locks conveniently located high above the ground thus eliminating the need for the operator to bend down.

The 75 Sprinter II dual action leg lock system is designed for operators who require speed and convenience of setup without compromise. By placing independent leg lock levers adjacent to each other, both the upper and lower stages they can be operated in unison or independently from one single upper leg location.

The unique intertwined layered construction method of the carbon/basalt fiber gives the tripod tubes incredible stiffness to the leg assembly.

The leg assemblies are integrated with the 75mm die-cast alloy bowl with precision resulting in a highly rigid tripod no matter what height you choose.

- Arrowx Softcase -
The Arrowx softcase for 2 stage tripods comes with padded carry straps and a head-end cradle to protect the fluid head during transport. The softcase is made from weatherproof ballistic nylon and uses heavy-duty zippers on bag and all pockets. The Arrowx softcases feature backpack straps which can be stored within external pocket when not required. Weighing only 4.4kg (9.7 lbs) and a transport length of 960mm (37.8") this softcase is great protection for your tripod system.

Features

• Durable double cross stitched construction
• Tripod cradles (top and bottom) with clip straps for secure transportation
• Back pack straps with storage pocket
• Outer shell is made from robust ballistic nylon
• Hard plastic skid pads for protection
• D links for shoulder strap
• External pocket and card holder
• Designed for two stage Sprinter tripod systems