Behringer MIC2200 Specifications
Audio Input
Microphone
Connectors: XLR
Type: transformer less, DC-decoupled input
Impedance: 3 kOhms balanced
Maximum input level: +10 dBu balanced and unbalanced
CMRR: typ. 40 dB, >55 dB at 1 kHz
Line
Connectors: XLR and 0.25" jack
Type: transformer less, DC-decoupled input
Impedance: 60 kOhms balanced
Maximum input level: +23 dBu balanced and unbalanced
CMRR: typ. 40 dB, >55 dB at 1kHz
Audio Output
Connectors: XLR and 0.25" jack
Type: electronically servo-balanced output stage
Impedance: 60 Ohms balanced, 30 Ohms unbalanced
Maximum output level: +21 dBu balanced and unbalanced
System Requirements
Frequency response: 10 Hz to 200 kHz, +/-3 dB
Noise: >94 dBu, unweighted, 22 Hz to 22 kHz
THD: 0.011% typ. at +4 dBu, 1 kHz, Gain 1
IMD: 0.01% typ. SMPTE
Crosstalk: <-88 dB, 22 Hz to 22 kHz
Function Controls
Mic gain: variable (+10 dB to +60 dB)
Frequency (lo cut): variable (12 to 320 Hz)
Frequency (PEQ): variable (10 Hz to 20 kHz), dependent on x10 and x0.1 switch
Bandwidth: variable (0.03 to 2 octaves)
Level: variable (-15 dB to +15 dB)
Output: variable (-20 dB to +20 dB)
Function Switches
+48 V: activates phantom power
Mic/line: switches from line to mic preamplifier
Phase rev: phase reverse (180deg.)
Lo cut: activates the high-pass filter
0.1: switches the frequency control to 10 Hz - 200 Hz
10: switches the frequency control to 1 kHz - 20 kHz
EQ in/out: activates the parametric filter
Indicators
Clip: clipping control LED
Output level: 12-segment LED display: -30/-24/-18/-12/-6/-3/0/+3/+6/ +9/+12/+18 dB
function switch: LED indicator of every switch
Power Supply
Mains voltages: 120 V-, 60 Hz
Power consumption: maximum 20 Watts
Fuse: 100 - 120 V-: T 500 mA H, 200 - 240 V-: T 250 mA H
Mains connection: standard IEC receptacle
Dimensions (W x D x H)
approximately 8.5 x 1.8 x 19" / 215.9 x 45.72 x 482.6mm
Weight
approximately 5.07lbs / 2.3kg
