











Picture does not represent the actual item
See Options
Need help? Ask our experts.
Review Summary
Single-zone automatic
Power over Ethernet Plus (PoE+), Class 4
24 W maximum
Designer
Cat5e or higher (shielded cable recommended)
RJ45
UL2043 (Suitable for Air Handling Spaces)
IEC 60529 IP5X Dust Protected
20 Degree F to 104 Degree F (-6.7 Degree C to 40 Degree C)
-20 Degree F to 165 Degree F (-29 Degree C to 74 Degree C)
20 x 20' (6.1 x 6.1m)
125 Hz to 20 kHz
Channel Count: 1 output channel
Sampling Rate: 48 kHz
Bit Depth: 24
-1.74 dBFS/Pa
95.74 dB SPL (Relative to 0 dBFS overload)
75.76 dB A-weighted (Ref. 94 dB SPL at 1 kHz)
26.6 ms (Does not include Dante latency)
18.24 dB SPL-A
77.5 dB
Automatic mixing, acoustic echo cancellation (AEC), noise reduction, automatic gain control, compressor, delay, equalizer (4-band parametric), mute, gain (140 dB range)
Up to 250 ms (Tail Length)
Channel Count: 2 input channels
120 Hz to 20 kHz
Pink noise: 86 dB SPL
1 kHz sine tone: 88 dB SPL
80 Degree (Average of 1 octave band centered on 4 kHz)
Delay, compressor, signal generator, equalizer (4-band parametric)
6.3 ms (Not including Dante latency)
White
Flange: 0.41" (1.04cm)
Edge to edge: 23.77" (60.37cm)
Height: 2.2" (5.58cm)
12.7 lbs (5.8kg)
1x 3-pin block connector (Active Balanced)
1x 3-pin block connector (Impedance Balanced)
USB 2.0, Type B
Single port carries 1 input and 1 output channel (Summed mono)
RJ45
4 input channels, 2 output channels
Non-inverting, any input to any output
Power over Ethernet (PoE), Class 0. (PoE Plus compatible).
6.5W, maximum
HTML5 Browser-based
20 to 104 Degree F (-6.7 to 40 Degree C)
-20 to 165 Degree F (-29 to 74 Degree C)
Maximum: 6.8W (23.0BTU/hr)
Typical: 6.0W (20.8BTU/hr)
+1, -1.5 dB
20 to 20,000 Hz
Sampling Rate: 48 kHz
Bit Depth: 24
Sampling Rate: 44.1, 48 kHz
Bit Depth: 16, 24
Analog to Analog: 0.98 ms
Analog to Dante: 0.39 ms
Dante to Analog: 0.72 m
Dante to Dante: 0.14 ms (Does not include Dante latency)
20 Hz to 20 kHz, A-weighted, typical
Analog-to-Dante: 113 dB
Dante-to-Analog: 117 dB
20 Hz to 20 kHz, A-weighted, input terminated with 150Ohms
Line: -86 dBV
Aux: -98 dBV
At 1 kHz, 0 dBV Input, 0 dB analog gain
<0.05%
150Ohms balanced source at 1 kHz
>70 dB
10.6 k Ohms
Line: +27 dBV
Aux: +15 dBV
Line: +20 dBV
Aux: +0 dBV
Mic: -26 dBV
Per Channel: Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
System: Matrix mixer
Cable Requirements: Cat 5e or higher (shielded cable recommended)
1.57 x 5.51 x 5.04" (4 x 14 x 12.8cm)
23.56 oz (668g)
The first combination ceiling array microphone and loudspeaker for AV conferencing in small & medium spaces. With only one device to mount and one cable to connect, you'll have cleaner, clearer sound faster than ever. Single Zone Automatic Coverage technology covers a 20 by 20 foot (6 by 6 meter) area while onboard IntelliMix DSP delivers echo- and noise-free audio.