


Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
IDP 008 ADA Wall Plaque
Black/Silver with silver legends on the front, white legends on the back
Standard 19" Rack, one EIA rack space high, 1/2 space wide 1-2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector
Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode.
Operating: 32 to 104 Degree F (0 to 40 Degree C)
Storage: -4 to 158 Degree F (-20 to 70 Degree C)
DSP based; Compression: 1:1, 1.5:1 or 2:1
High-pass and Low-pass Filter Frequency control
31 - 16000 Hz, +/-3 dB (Music Audio Preset)
Greater than or equal to 74 dB Transmitted RF
Less than 0.25% @ 1 kHz (RF output)
Greater than 57 dB @ 1 kHz, Mic or Line
Front panel buttons or hosted web interface
(1x) Combination 3-pin XLR, 1/4" (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line Level, or balanced or unbalanced microphone with Selectable Phantom Power
In menu, adjustable to 0 to -50 dB, in 1dB steps
14.4 VDC applied through 2.2 k Ohm resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4" TRS jack
10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks
1/4" TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ohm (level adjustable in menu 0 to -40 dB in 2 dB steps)
RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ohm
Nominal (1st Amber LED): -55 dBV (1.7 mV RMS)
Overload Warning (Displayed on Screen): -15 dBV (180 mV RMS)
Nominal (1st Amber LED): -25 dBV (55 mV RMS)
Overload Warning (Displayed on Screen): +16 dBV (6.3 V RMS)
RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address
Apple iOS 9.1 or newer; Android 6.0 or newer; Blackberry and windows not supported
FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme
8.45 x 8.25 x 1.72" (21.5 x 21 x 4.4cm)
3 lb (1.36kg)
2" (5cm) full color OLED Touchscreen
3.5mm standard mono jack
6 hours
About an hour
FCC, RoHS3, WEEE, Industry Canada, CE, RCM, Telec
1.89 x 0.5 x 4.46" (48 x 12.7 x 113.3cm)
Black
Silicone
WaveCAST Receiver
Black and dark transparent plastic dividers
18-20V DC
5V DC/1A for black USB ports, 5V DC/2.4A for red USB ports
8 Units
One LED for indicating power to charger; no individual indicators.
CHG 408 WF: WF R1
WEEE, RoHS, CE, FCC, IC, Japan
8.3 x 5.5 x 1.2" (210 x 140 x 29.5mm)
0.9 lb (0.4kg)
Black and clear plastic
AC 100-220V 50/60Hz 0.5A (max)
DC 5.0V 1.1A per bay (22W max)
4 Units
Individual Charging Indicators: Blue LEDs light up dividing clear panels
CHG 404 WF: WF R1
WEEE, RoHS, CE, FCC, IC
6 x 5 x 3" (15.6 x 12.7 x 7.85cm)
0.7 lb (0.3kg)
Around-ear speaker
3.5mm mono
39" (99.06cm)
23mm
32 Ohm
20 - 20kHz
30 mW
118 dB @ 1kHz
0.5 oz (15g)
Black
3.5mm stereo plug with ring disconnected
8-16 Ohms
500 mW max
25 mW input at 1000 Hz produces 1.7 A/m 6" above the center of loop
85microW input produces 0.1 A/m (IEC Standard)
RoHS, WEEE
18.5" (46.9cm)
1.5 oz (42.5g)
PPA T45, PPA T45NET, MOD 232
RoHs, IEC
Screws: 6-32 x 3/8" (Each)
10.37 x 6.25 x 0.13" (26.3 x 15.8 x 0.31cm)
You can experience superior audio quality with the WaveCAST WF SY5 PRO-12 Wi-Fi Assistive Listening System, a professional-grade audio solution designed for high-fidelity sound. This system is built on a robust hardware-based DSP audio system architecture, ensuring optimal performance for any audio stream being delivered.
The WaveCAST WF SY5 PRO-12 is versatile, offering optimized settings for hearing assistance, high-fidelity music playback, and maximum speech intelligibility. It also allows for custom pre-sets for specific performance applications. This system features professional audio inputs including 1/4" XLR connectors, phantom power, and a line level output jack.
The system's DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control. The 16-bit DAC provides a 48Khz sample rate for a smooth digital stream, minimizing digital harshness.
The WaveCAST WF SY5 PRO-12 supports both unicast and multicast network configurations. It can accommodate up to four WaveCAST systems on the same Wi-Fi network, supporting 45 users in unicast mode or over 1500 users in multicast mode.
The WaveCAST system offers flexibility in control, allowing for settings to be changed via the front panel interface or the hosted web interface. A remote programming guide is also available upon request.
This package includes the WF R1N Receiver, a dedicated receiver for the WaveCAST system with the WaveCAST App pre-installed. This receiver can be distributed as an assistive listening device for those who prefer not to install the app on their personal devices.
The system also comes with the CHG 408 WF 8-Slot Charger and CHG 404 WF 4-Slot Charger, providing charging solutions for WaveCAST Receivers and Digi-Wave DLT 400 and DLR 400 RCH.
The EAR 022 Surround Earphone offers excellent sound quality and compatibility with all Williams Sound receivers and Pocketalkers. The NKL 001 S Neckloops are designed to magnetically couple the audio output from a Williams Sound unit into a hearing aid equipped with a T-Coil.
The package also includes the RPK 005 Rack Panel Kit for mounting one transmitter or modulator in one IEC rack space, and the IDP 008 ADA Wall Plaque, a self-adhesive wall plaque that alerts patrons to the availability of a hearing assistance system.
Please note that this version of the system is not Dante compatible. The new WaveCAST app provides an easy-to-use, intuitive user interface and is available in iOS or Android. Listeners can easily select channel and volume level once their personal device is connected to the Wi-Fi network.