ClearOne CONVERGE PA 460 4 Channel x 60W Class-D Audio Power Amplifier, 4/8 Ohms Mode or 70V/100V Modes

4 Channel, Balanced audio input, 3.81mm Green Phoenix/Euroblock type male header, Push-on mini-terminal block

4 Channel, Balanced audio output, 5.08mm Black Phoenix/Euroblock type male header, Push-on mini-terminal block

20Hz - 22kHz at 0dBu

4/8Ohms and 70.7V/100V

4 x 60W at sensitivity, in 4/8Ohm & 70.7V/100V modes

2 x 120W at sensitivity, in 4/8Ohms mode
2 x 120W at sensitivity, in 70.7V/100V mode

20Hz - 22KHz (+/- 1dB)

20Hz - 22kHz at rated power, 4/8W, <0.08%

20Hz - 20kHz at 0dB, >100dB, 8W, unweighted

Single End, Bridged mode
70.7V mode
100V mode
HPF mode at 80Hz

Adjustable: 0 to max at rated power

Power status indicator
Blue light indicates power on

Clip status indicator
Red light indicates clip status due to:
Input is too high, signal clip
Output peak detected

Signal indicator
Blue light indicates signal is present or passing out

Standby mode status indicator
Yellow light indicates Standby mode
Standby mode enables when no audio is present
The amplifier first enters Mutemode at 2 minutes, then into Standby mode at 10 minutes

Limit indicator
Red light indicates gain reduction activation

Protection or Disable status indicators
Red light indicates Disabled/Mute/Protection mode
Mute mode enables when no audio is present for 2 minutes
Protection mode enables when temperature exceeds 185 deg. F (85 deg. C)

42W Typical, Pink Noise at 0 dBu, 8Ohms

AC input 100-240VAC, 50Hz/60Hz

143 BTU/Hr Typical

-10 to 40 deg. C (14 to 104 deg. F) (Ambient temperature)

1 RU for up to two units

8.38 x 11.06 x 1.72" (21.29 x 28.09 x 4.37cm)

2.8 lbs (1.27kg)