
This item is no longer available.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
3000W @ 2 Ohms Stereo (per Channel)
2100W @ 4 Ohms Stereo (per Channel)
1200W @ 8 Ohms Stereo (per Channel)
6000W @ 4 Ohms Bridged-Mono
4200W @ 8 Ohms Bridged-Mono
1.4 Vrms
(at 1 watt, 20 Hz - 20 kHz) +0 dB, -1 dB
103 dB (A weighted)
< 0.5%
> 500
20 kHz - 1 kHz: > 70 db
20k ohms balanced, 10k ohms unbalanced
+22 dBu typical
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
15.3A; no more than 180W at idle
0 Deg.C to 40 Deg.C at 95% relative humidity (non-condensing)
Two front-panel rotary level controls, one for each channel
On/Off switch applies AC power to the amplifier
Three buttons near the LCD screen that are used to access menu items and front panel lockout
Backlit liquid crystal display that shows preset and processing status
Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
Green LED flashes when output signal exceeds -10 dB below clip.
Green LED flashes when output signal level exceeds -20 dB below clip.
Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Red LED, one per channel, turns on at the threshold of audible distortion
Red LED, one per channel, illuminates under excessive temperature conditions
Blue LED illuminates when the amplifier has been turned on and has power
XLR, one per channel
Loop-thru signal from input connector for linking another amplifier, one per channel.
Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
Type B, connects to HiQnet network.
Steel
Cast-aluminum
Proportional speed fan with front-to-rear airflow.
19 x 3.5 x 16.2" (48.26 x 8.89 x 41.14cm)
24.0 lbs (10.9kg)
871015005478
The Crown Audio XTi 6002 Power Amplifier delivers up to 1200W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 6002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply, so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.
br>An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more.