RME Fireface UFX II USB Audio Interface - SKU#1803974

Picture does not represent the actual item
See what's in the box

See all RME items

Used RME Fireface UFX II USB Audio Interface

SKU: US1803974

This item is no longer available.

Recommended Items

RME Fireface UCX II: Picture 1 regular
RME Fireface UCX II 40-Channel Advanced USB Audio Interface
$1,699.00
RME Fireface 802: Picture 1 regular
RME Fireface 802 USB and Firewire Audio Interface
$2,299.00
PreSonus StudioLive 24R: Picture 1 regular
PreSonus StudioLive 24R 26-Input 32-Channel Series III Stage Box and Rack Mixer
$1,469.99$1,269.99
PreSonus StudioLive 32R: Picture 1 regular
PreSonus StudioLive 32R III Stage Box & Rack Mixer, with Headphones,4x XLR Cable
$1,739.79$1,679.99
PreSonus StudioLive 32R: Picture 1 regular
PreSonus StudioLive 32R 34-Input 32-Channel Series III Stage Box and Rack Mixer
$1,679.99$1,379.99
PreSonus StudioLive 24R: Picture 1 regular
PreSonus StudioLive 24R III Stage Box & Rack Mixer, with Headphone, 4x XLR Cable
$1,529.79$1,469.99
Behringer UMC202HD: Picture 1 regular
Behringer U-PHORIA UMC202HD USB Audio Interface, w/TAPH100 Headphones,AT2020 Mic
$299.99$263.83
Tascam US-4X4HR: Picture 1 regular
Tascam US-4x4HR 4Mic, 4In/4Out High Resolution Versatile USB Audio Interface
$419.00$249.00
Universal Audio Apollo x16D: Picture 1 regular
Universal Audio Apollo x16D Rackmount Audio Interface w/Dante,Essentials+Pug-Ins
$2,999.00
Behringer U-PHORIA UMC404HD: Picture 1 regular
Behringer U-PHORIA UMC404HD USB 2.0 Audio/MIDI Interface W/10' 8mm XLR Mic Cable
$179.00
Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest in Pre-Owned Gear & Peace of Mind!

Extend coverage on pre-owned products after the retailer warranty ends and protect photo & video gear from accidental damage with Adorama Protect.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Extended Protection

Coverage for pre-owned gear begins after the retailer warranty ends, plus accidental damage protection for photo/video gear that starts on day one.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Failure Protection

Failure Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for International and U.S. territories purchases. Plans on pre-owned items do not cover pre-existing damages.

Browse our FAQ

See Terms & Conditions

RME Fireface UFX II Specifications

  • Analog: AD, Line In 1-8, rear

    Resolution AD: 24 bit
    Signal to Noise ratio (SNR): 113dB RMS unweighted, 116dBA
    Frequency response at 44.1kHz, -0.1dB: 5 Hz - 20.8kHz
    Frequency response at 96kHz, -0.5dB: 3 Hz - 45.8kHz
    Frequency response at 192kHz, -1dB: 2 Hz - 92kHz
    THD: < -110dB, < 0.00032 %
    THD+N: < -104dB, < 0.00063 %
    Channel separation: > 110dB
    Maximum input level: +19dBu
    Input: 6.3 mm TRS jack, electronically balanced
    Input impedance: 8 kOhms unbalanced, 12kOhms balanced

  • Analog: AD, Line In 1-8, rear (Cont.)

    Input sensitivity switchable to Lo Gain, +4dBu
    Input level for 0dBFS at Lo Gain: +19dBu
    Input level for 0dBFS at +4dBu: +13dBu
    Variable gain: 0 to +12dB
    Minimum level for 0dBFS: +1dBu, -1.2dBV

  • Analog: Microphone In 9-12, front

    As AD, but:
    Input: XLR, electronically balanced
    Input impedance: 3.4kOhms
    Signal to Noise ratio (SNR): 115dB RMS unweighted, 118dBA
    Gain range: 75dB
    Maximum input level, Gain 0dB: +18dBu
    Maximum input level, Gain 75dB: -57dBu
    CLIP LED: 0dBFS SIG LED: -60dBFS

  • Analog: Instrument In 9-12, front

    As AD, but:
    Input: 6.3 mm TS jack, unbalanced
    Input impedance: 1MOhms
    Signal to Noise ratio (SNR): 114dB RMS unweighted, 118dBA
    Gain range: 42dB
    Maximum input level, Gain 8dB: +21dBu
    Maximum input level, Gain 50dB: -21dBu

  • Analog: DA, Line Out 3-8, rear

    Resolution: 24 bit
    Dynamic range (DR): 115dB RMS unweighted, 118dBA
    Frequency response at 44.1kHz, -0.5dB: 5 Hz - 20.8kHz
    Frequency response at 96kHz, -0.5dB: 5 Hz - 45kHz
    Frequency response at 192kHz, -1dB: 5 Hz - 89kHz
    THD: < -110dB, < 0.00032 %
    THD+N: < -104dB, < 0.00063 %
    Channel separation: > 110dB
    Maximum output level: +19dBu
    Output: 6.3 mm TRS jack, servo-balanced

  • Analog: DA, Line Out 3-8, rear (Conti.)

    Output impedance: 75Ohms unbalanced, 150Ohms balanced
    Output level switchable Hi Gain, +4dBu, -10dBV
    Output level at 0dBFS at Hi Gain: +19dBu
    Output level at 0dBFS at +4dBu: +13dBu
    Output level at 0dBFS at -10dBV: +2dBV

  • DA - Stereo Monitor Output XLR (1-2)

    As DA, but:
    Output: XLR, balanced
    Output level switchable 24dBu, Hi Gain, +4dBu, -10dBV
    Output level at 0dBFS at 24dBu: +24dBu
    Output level at 0dBFS at Hi Gain: +19dBu
    Output level at 0dBFS at +4dBu: +13dBu
    Output level at 0dBFS at -10dBV: +2dBV

  • DA - Stereo Monitor Output Phones (9-12)

    As DA, but:
    Output: 2x 6.3 mm TRS stereo jack, unbalanced
    Maximum output level at 0dBFS, High: +19dBu
    Maximum output level at 0dBFS, Low: +2dBV
    Output impedance: 2Ohms
    Max power per channel at 32Ohms load, 0.1% THD: 210 mW (2.6 Vrms, +10.5dBu)

  • MIDI

    2x MIDI I/O via 5-pin DIN jacks
    Galvanically isolated by optocoupled input
    Hi-speed mode: Jitter and response time typically below 1 ms
    Separate 128 byte FIFOs for input and output

  • Digital

    Clocks: Internal, ADAT, AES, MADI, word clock
    Low Jitter Design: < 1 ns in PLL mode, all inputs
    Internal clock: 800 ps Jitter, Random Spread Spectrum
    Jitter suppression of external clocks: > 30dB (2.4kHz)
    Effective clock jitter influence on AD and DA conversion: near zero
    PLL ensures zero dropout, even at more than 100 ns jitter
    Digital Bitclock PLL for trouble-free varispeed ADAT operation
    Supported sample rates: 28kHz up to 200kHz

  • Digital Inputs: AES/EBU

    1x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
    High-sensitivity input stage (< 0.3 Vpp)
    SPDIF compatible (IEC 60958)
    Accepts Consumer and Professional format
    Lock range: 27kHz - 200kHz
    Jitter when synced to input signal: < 1 ns
    Jitter suppression: > 30dB (2.4kHz)

  • Digital Inputs: ADAT Optical

    2x TOSLINK, format according to Alesis specification
    Standard: 2 x 8 channels 24 bit, up to 48kHz
    Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz
    Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz
    Bitclock PLL ensures perfect synchronization even in varispeed operation
    Lock range: 31.5kHz - 50kHz
    Jitter when synced to input signal: < 1

  • Digital Inputs: SPDIF optical (ADAT2)

    1x optical, according to IEC 60958
    Accepts Consumer and Professional format
    Lock range: 27kHz - 200kHz
    Jitter when synced to input signal: < 1 ns
    Jitter suppression: > 30dB (2.4kHz)

  • Digital Inputs: Word Clock

    BNC
    Internal termination 75Ohms switchable
    Automatic Double/Quad Speed detection and internal conversion to Single Speed
    SteadyClock guarantees super low jitter synchronization even in varispeed operation
    Not affected by DC-offsets within the network
    Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
    Overvoltage protection

  • Digital Inputs: Word Clock (Conti.)

    Level range: 1.0 Vpp - 5.6 Vpp
    Lock Range: 27kHz - 200kHz
    Jitter when synced to input signal: < 1 ns
    Jitter suppression: > 30dB (2.4kHz)

  • Digital Outputs: AES/EBU

    XLR, transformer-balanced, galvanically isolated, according to AES3-1992
    Output level Professional 4.5 Vpp, Consumer 2.6 Vpp
    Format Professional according to AES3-1992 Amendment 4
    Format Consumer (SPDIF) according to IEC 60958
    Single Wire mode, sample rate 28kHz up to 200kHz

  • Digital Outputs: ADAT

    2x TOSLINK
    Standard: 2 x 8 channels 24 bit, up to 48kHz
    Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz
    Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz

  • Digital Outputs: SPDIF optical (ADAT2)

    Format Consumer (SPDIF) according to IEC 60958
    Sample rate 28kHz up to 200kHz

  • Digital Outputs: Word Clock

    BNC
    Max. output voltage: 5 Vpp
    Output voltage at 75Ohms termination: 4.0 Vpp
    Output impedance: 10Ohms
    Frequency range: 27kHz - 200kHz

  • Power supply

    Internal switching PSU, 100 - 240 V AC, 36 Watts

  • Idle power consumption

    19 Watts

  • Typical Power Consumption

    22-25 Watts

  • Total Depth

    240mm (9.45")

  • Temperature range

    +5 to +50deg. C (41 to 122 deg. F)

  • Relative humidity

    < 75%, non condensing

  • Dimensions (WxHxD)

    Including Rack Ears: 483 x 44 x 210mm (19.02 x 1.73 x 8.27")
    Without Rack Ears: 440 x 44 x 210mm (17.32 x 1.73 x 8.27")

  • Weight

    3kg (6.61 lbs)

About RME Fireface UFX II USB Audio Interface - SKU#1803974

Fireface UFX II - The USB Flagship Interface
The unique Fireface UFX II is the premier solution to transfer analog and digital audio data directly to a computer from practically any source. Numerous unique features, well thought-out configuration dialogs, an industry-leading mixing engine and monitoring solution, professional DSP effects and class-leading analog circuits with latest digital converters put the Fireface UFX II at the very top of the range of computer-based audio interfaces.

With exceptional flexibility and compatibility, the inclusion of DURec (Direct USB Recording) and RME's famous low latency hardware and driver designs, the Fireface UFX II delivers a rich feature set that will appeal to users in both high end home studios and commercial audio production facilities.

With capacity for 60 audio channels (30 input and 30 output), support for sampling frequencies upward of 192 kHz and the flexibility provided by USB connectivity, the new Fireface UFX II is an ideal solution to a wide range of recording, mixing and monitoring applications.

The Fireface UFX II offers excellent flexibility that enables the interface to fit seamlessly into a myriad of production environments. Analog, ADAT, AES, SPDIF and USB 2 are all standard on the Fireface UFX II. Equally impressive is the unit's channel count: 12 analog, 16 ADAT and 2 AES for 30 channels input and 30 channels output. Further, with support for USB 2 connectivity, the new Fireface UFX II can integrate with RME's optional ARC USB remote controller.

RME's Fireface UFX II incorporates premium AD/DA converters, optimized analog I/O circuits, as well as improved SNR and THD values to guarantee pristine, crystal clear and transparent audio. A new PAD-free mic circuit design with +18 dBu maximum input level and 75 dB gain range provides trouble-free operation for the most demanding recording environments.

Further, new low impedance, high power phones outputs (2 Ohms) with +19 dBu maximum output level provide ample output power and volume on any headphones - high or low impedance.

Improved DURec (Direct USB Recording)
The Fireface UFX II also includes DURec (Direct USB Recording), which is available on the front of the interface. It now offers second generation hardware with improved USB functionality and compatibility - providing greater reliability, even with slower or multi-partitioned USB thumb drives.

ARC USB Remote Control - Plug'n Play Plus
The ARC USB connects to your computer via USB and talks to TotalMix FX directly. It has 15 freely assignable and illuminated buttons, one encoder wheel and a TS jack to connect a foot switch.

The ARC USB is a USB 1.1 MIDI remote control for the Fireface UFX II. Thanks to operating as a UAC 1 class device, it is natively compatible to Windows and Mac OS X. As soon as it is present in the operating system, TotaIMix FX will automatically detect the ARC USB and communicate with it via simple MIDI remote commands to control the UFX II.

TotalMix FX
Since 2001, TotalMix has added unlimited routing and mixing to RME audio interfaces. Its unique capability to create as many independent submixes as output channels available, turned it into the most flexible and powerful mixer of its kind.

With supported hardware, TotalMix FX includes a complete effects system, which not only adds flexibility to the recording chain, but also makes latency saddled software solutions obsolete. TotalMix FX can completely replace an external mixer, enabling the creation of multiple latency-free monitor mixes with EQ, Dynamics, Reverb and Delay for any outputs, incl. main monitors and headphone mixes for musicians.

TotalMix FX for iPad App

TotalMix FX for iPad adds full control over hardware mixer and DSP effects for Fireface UFX+, UFX II, UFX, UCX, 802, Babyface, Babyface Pro and MADIface Pro when in Class Compliant Mode and lets you create, store and load complete mixes directly from the iPad

Used Guarantee

30-day money back!

Sell or Trade your Gear

Get started in 3 easy steps

What's in the box:

  • RME Fireface UFX II USB Audio Interface
  • 1.8m USB 3.0 Cable
  • Power Cord
  • Manual
  • Driver CD