Amplifiers
Save 5% Every Day† with the Adorama Edge Card. Learn More
Mackie HM-400 Rack-Mountable 4-Chanel Headphone Amplifier W/2X 20' XLR MIC Cable
- Mackie HM-400: Pristine audio, low noise design.
- Four channels offer versatile headphone distribution.
- Powerful headphone amplifier: 550mW output per channel.
- Rack-mountable design for durable, secure integration.
- XLR inputs/outputs ensure reliable connectivity.
Temporarily On Backorder
Studiomaster HX4-1800 4x 765W at 4 Ohms 1U Digital Power Amplifier
- High Power Amplifier: 4x765W at 4 Ohms.
- Low Distortion: Ensures clean audio output.
- Versatile Input/Output Options for connectivity.
- Reliable Performance: Built for consistent use.
- Durable Build: Robust design for longevity.
Special Order
Studiomaster HX2-500 2x 425W at 4 Ohms 1U Digital Power Amplifier
- High Power Amplifier: 2x425W at 4 Ohms.
- Low THD: 0.02% for pristine audio quality.
- Signal-to-Noise Ratio: 105dB for clear sound.
- Input Impedance: 20k ohm (bal), 10k ohm (unbal).
- Damping Factor: 300 ensures speaker control.
Special Order
Studiomaster HX2-900 2x 765W at 4 Ohms 1U Digital Power Amplifier
- High Power Output: 2x765W at 4 Ohms for robust audio.
- Low THD: Ensures clean sound with minimal distortion.
- Signal-to-Noise Ratio: 105dB for pristine audio clarity.
- Input Sensitivity: 1Vrms for optimal amplifier performance.
- Damping Factor: 300 delivers controlled, tight bass.
Special Order
Studiomaster HX2-700 2x 595W at 4 Ohms 1U Digital Power Amplifier
- High power output: 2x595W at 4 Ohms for pro audio.
- Low THD ensures pristine audio amplification quality.
- Signal-to-noise ratio: 105dB for clear sound output.
- Input impedance: 20k ohm (bal) for versatile use.
- Damping factor: 300 ensures optimal speaker control.
Special Order
Tascam MA-BT240 240W Mixing Amplifier with Bluetooth Extension
- Tascam MA-BT240: 240W mixing amplifier.
- Bluetooth extension for wireless audio input.
- Versatile inputs: Mic, Line, Euroblock options.
- High/Low impedance speaker output selectable.
- EQ control tailors sound to your environment.
Special Order
Rolls RA62C 6-Channel Headphone Amplifier, 1U Rackmount
- High-power headphone amplifier; 600mW/channel.
- Low noise amp: 90dB signal-to-noise ratio.
- Versatile inputs: XLR, RCA, TRS connectivity.
- Crystal clear sound: DC - 30 kHz frequency response.
- Durable 1U rackmount design; Rolls quality.
Ships from Manufacturer
Rolls HR251 50+50W XLR Power Amplifier
- Delivers 50 Watts x2 Power Output at 4 Ohms.
- Low THD ensures high-fidelity audio amplification.
- XLR inputs offer balanced, low-noise operation.
- High Signal-to-Noise Ratio for clear sound.
- 10K Ohms Input Impedance ensures compatibility.
Ships from Manufacturer
Dynacord L1300FD-US 2x 650W DSP Power Amplifier with FIR Drive
- Delivers 650W power, pro audio amplification.
- High signal-to-noise ratio; pristine audio quality.
- Low THD ensures clean, accurate sound output.
- Versatile impedance matching for speaker setups.
- Reliable protection circuits ensure amp longevity.
Special Order
Ashly FATWB Flush-Mount Bracket Kit for FA Series Power Amplifiers
- Secure Ashly FA Series power amplifier mounting.
- Flush-mount bracket ensures a stable installation.
- Includes hardware for easy table or wall setup.
- Designed for Ashly 1/2 rack power amplifiers.
- Robust bracket offers reliable amplifier support.
Special Order
Ashly FA1.2RM Rackmount Kit for Single or Dual 1/2-Rack FA Amplifiers
- Rackmount Kit for Ashly FA Series Amplifiers.
- Securely mounts single or dual 1/2-rack amplifiers.
- Occupies only 1U rack space for efficient setup.
- Includes hardware for easy power amplifier installation.
- Ensures reliable mounting of your audio amplifier.
Special Order
Ashly FA2.2RM Rear Rail Support Kit for FA Series Amplifiers
- Secure FA Series amplifiers with rear support.
- Durable metal construction ensures lasting support.
- Black finish seamlessly integrates with amplifiers.
- Provides reliable stability for power amplifiers.
- Simplifies amplifier mounting for easy setup.
Special Order
Dynacord L1800FD-US 2x 950W DSP Power Amplifier with FIR Drive
- Delivers 2x 950W power for pro audio setups.
- Integrated DSP ensures pristine sound quality.
- Low distortion enhances audio clarity, fidelity.
- Flexible XLR/NL4 connectors for easy setup.
- Reliable protection circuits ensure amp longevity.
Special Order
Rolls HA243 4 Channel Studiophile Headphone Amplifier
- High power output: 652mW per channel at 62 Ohms.
- Low distortion: THD+N less than 0.008% for clear audio.
- Versatile input options: RCA, 1/4", and 3.5mm inputs.
- Optimized impedance match: 10 kOhms input impedance.
- Durable headphone amplifier: Built for reliable use.
Ships from Manufacturer
Rolls RA163 8 Channel Distribution Amplifier
- Rolls RA163: Pristine audio distribution amplifier.
- 8-Channel amp: Ensures optimal sound quality output.
- Low distortion: <.008% THD for clean amplification.
- Balanced XLR connectors: Versatile input options.
- Wide frequency response: 10 Hz - 40 kHz (+/- 1 dB).
Ships from Manufacturer
Ashly Network Enabled 4-Channel Amplifier, 250W @ 100V & DSP
- 250W Power Amplifier: High output, pristine audio.
- Network enabled amplifier with built-in DSP.
- Signal-to-Noise Ratio: >98dB for clear sound.
- Input Impedance: 20k ohms, balanced inputs.
- Damping Factor: >250 ensures speaker control.
Special Order
Crown Audio XTi 4002 650W Stereo Power Amplifier
- Delivers 650W power at 8 ohms for pro audio.
- Low distortion ensures pristine sound quality.
- High signal-to-noise ratio: 100dB (A weighted).
- Input impedance: 20k ohms balanced for clarity.
- Damping factor >500 ensures optimal speaker control.
Special Order
Behringer 1000W Ultra-Lightweight Class-D Power Amplifier With 25' Speaker Cable
- 1000W Power Amplifier: High power output, Class-D.
- SmartSense Impedance: Optimal loudspeaker performance.
- XLR/TRS Inputs: Versatile connectivity for any setup.
- Low THD: Ensures high-fidelity audio reproduction.
- Protection Circuitry: Reliable amplifier operation.
Universal Audio Apollo e2m Stereo Headphone Amplifier and Line Interface w/Dante
- Apollo e2m: Pristine audio, 120dB dynamic range.
- Dante Interface: Low latency for pro monitoring.
- Headphone Amplifier: High-power, low THD+N output.
- Universal Audio: Premium build, mic stand mount.
- Stereo Amplifier: Versatile input/output options.
Pre Order Now
Ashly FX Series FX60.2 2-Channel 60W Compact Class D Power Amplifier with DSP
- 60W Power Amplifier: High power output, low distortion.
- Class D Amplifier: Ensures impedance matching.
- Signal-to-Noise Ratio: >106dB for pristine audio.
- Protection Circuitry: Reliable overload protection.
- Compact Amplifier: Perfect for live sound setups.
Special Order
Ashly FA Series FA125.2 2-Channel 125W Compact Class D Power Amplifier
- 125W Power Amplifier: High output for clear audio.
- Low THD: <0.5% for pristine sound quality output.
- High Signal-to-Noise Ratio: >102dB, minimal noise.
- Input Impedance: Balanced Euroblock input connectivity.
- Damping Factor: >250 ensures optimal speaker control.
Special Order
Ashly FX Series FX125.4 4-Channel 125W Compact Class D Power Amplifier with DSP
- 4-Channel Power Amplifier: 4x125W at 4/8 Ohms.
- Compact Amplifier: Class D, low distortion output.
- DSP Power Amplifier: Input, Zone, Output Processing.
- High Signal-to-Noise Ratio: >106dB for clear audio.
- Reliable Amplifier: Short circuit/thermal protection.
Special Order
Ashly FX Series FX125.2 2-Channel 125W Compact Class D Power Amplifier with DSP
- 125W Power Amplifier: High power output at 4/8 Ohms.
- Low THD Amplifier: <0.05% distortion for clean audio.
- High Signal-to-Noise Ratio: >106dB for pristine sound.
- Protection Circuits: Prevents short circuits & overload.
- Compact Class D Amplifier: Efficient, low power consumption.
Special Order
Ashly FA Series FA125.4 4-Channel 125W Compact Class D Power Amplifier
- 4-Channel Power Amplifier: Precise audio control.
- 125W Power Output: Robust sound reproduction.
- Low THD: Ensures high-fidelity audio clarity.
- High Signal-to-Noise Ratio: Clean, crisp audio.
- Comprehensive Protection Circuits: Reliable operation.
Special Order
Ashly CA Series CA1.52 2-Channel 1500W Class D Power Amplifier
- 1500W Class D Power Amplifier, high power output.
- Low THD ensures pristine audio signal fidelity.
- High signal-to-noise ratio; clear, quality sound.
- Input impedance: 10k Ohm for optimal performance.
- Damping factor >250 for superior speaker control.
Special Order






















