
This item is no longer available.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
941.525 - 951.975 MHz
953.025 - 956.225 MHz
956.475 - 959.825 MHz
For FCC Part 74 and ISED RSS-123 licensed users.
Selectable; 25 or 100 kHz
Selectable; 25, 50 or 100 mW
Nu Hybrid, IFB
3.5 kHz deviation (Nu Hybrid)
+/- 0.002%
Compliant with ETSI EN 300 422-1 v1.4.2
-125 dBV, A-weighted
If set for dynamic mic: 0.5 mV to 50 mV before limiting
Greater than 1 V with limiting
If set for electret lavaliere mic: 1.7 uA to 170 uA before limiting
Greater than 5000 uA (5 mA) with limiting
Line level input: 17 mV to 1.7 V before limiting
Greater than 50 V with limiting
Dynamic mic: 300 Ohms
Electret lavaliere: Input is virtual ground with servo adjusted constant current bias
Line level: 2.7 k ohms
Soft limiter, 30 dB range
Fixed 5 V at up to 5 mA
Selectable 2 V or 4 V servo bias for any electret lavaliere
44 dB; panel mounted membrane switches
Dual bicolor LEDs indicate modulation -20, -10, 0, +10 dB referenced to full modulation
Control panel w/ LCD and 5 membrane switches
Selectable from 35 to 150 Hz
35 Hz to 20 kHz, +/-1 dB
SmartNR:
No Limiting: Off: 103.5
Normal: 107.0
Full: 108.5
With Limiting: Off: 108.0
Normal: 111.5
Full: 113.0
0.2% typical (Nu Hybrid Mode)
Switchcraft 5-pin locking (TA5F)
Detachable, flexible, unbreakable steel cable.
AA, Lithium disposal recommended
4.4 hrs
Required, Included
Lithium
2
AA
110KF3E
2.36 x 2.47 x 0.66" (60.09 x 62.86 x 16.30mm) (without microphone)
4 oz (113.39g) (w/ Lithium batteries)
microSDHC memory card
.wav files (BWF)
24-bit
44.1 kHz
HD mono mode: 24 bit - 144 kbytes/s
32 bit - 192 kbytes/s
Split gain mode: 24 bit - 288 kbytes/s
32 bit - 384 kbytes/s
Type: Analog mic/line level compatible; servo bias preamp for 2V and 4V lavaliere microphones
Input level: Dynamic mic: 0.5 mV to 50 mV
Electret mic: Nominal 2 mV to 300 mV
Line level: 17 mV to 1.7 V
Input connector: TA5M 5-pin male
Frequency response: 20 Hz to 20 kHz; +0.5/-1.5 dB
Dynamic range: 110 dB (A), before limiting
Distortion: < 0.035%
-5 to 122 Degree F (-20 to 50 Degree C)
Discover the Lectrosonics SMDWB/E07-941 Wideband Double AA Beltpack Transmitter/Recorder, a high-tech, compact, and portable device designed to meet the demands of professional audio transmission. This advanced piece of equipment is known for its extended operating range and battery life, making it a reliable choice for film, television, and theater productions, live events, and electronic news gathering applications.
The SMDWB/E07-941 offers selectable output power of 25, 50, and 100 mW, allowing for improved operating range and extended battery life based on your specific needs. Its hands-free setup and adjustment feature, facilitated by audible tones, ensures a hassle-free user experience. The device can be put to sleep to conserve battery power during setup, and then awakened for normal operation when the production begins.
This durable transmitter/recorder boasts an input gain adjustment in 1 dB increments over a 44 dB range and an adjustable low-frequency audio roll-off. This allows for precise control over subsonic and very low-frequency audio content. The wide frequency response and dynamic range in Nu Hybrid mode, along with compatibility modes for Lectrosonics and IFB receivers, ensure peerless audio quality.
The SMDWB/E07-941 features the unique Lectrosonics servo bias input circuitry with a standard TA5M type jack, making it compatible with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed to protect the entire audio chain from overload, with a range of more than 30 dB for excellent overload protection.
The device's water-resistant control panel with LCD, membrane switches, and multi-color LEDs make input gain adjustments, frequency, and compatibility mode selection quick and accurate. The battery compartment accepts AA batteries, and the housing is machined from solid aluminum blocks for lightweight durability. The non-corrosive finish resists salt water exposure and perspiration in extreme environments.
The SMDWB/E07-941 also offers an alternate recording function, allowing it to be used as a standalone recorder. The industry-standard .wav (BWF) file format is compatible with virtually any audio or video editing software. With its broad selection of frequencies selectable in 25 or 100 kHz steps across the tuning range of the 941 MHz band, this device is ideal for RF-intense multichannel and mobile venues. Experience the difference with the Lectrosonics SMDWB/E07-941 Wideband Double AA Beltpack Transmitter/Recorder.